Repair renovation of Roof top doors and construction of stairs of Help site at CID Hqrs Jammu

Amount

Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patches in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead including all carriages and cost of material involved.(1:4) Mix (1 cement : 4 course sand).

Providing / fixing powder coated aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z- sections and other sections of approved make conforming to IS :733 and IS :1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene felt etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / paneling, C. P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer in charge (including glazing and paneling)for shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required including all fittings complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) over and including priming coat with cement primer. Including all carriages and cost of material involved.

Providing and applying white cement based putty of average thickness 2mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete. (as directed by the EIC at site).

Structural steel work in built up section /framed work including cutting, hoisting, fixing in position using structural steel etc, as required in stringers, Grillage, Gates, treads landings etc of stir cases including use of chequerred plate wherever all complete and applying a priming coat of approved steel primer all complete including all carriages and cost of material involved.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture to give an even shade (two or more coats)

Providing and fixing Sanitary fittings/ fixtures of approved brand like Jaguar, Parko, Cera, Kerovit or equivalent. (as directed by EIC)

C P Bib Cock long nose

C P Bib cock short body

C P Angle valve

C P Grating

PVC Connection

Flush Tank

Waste pipe with coupling

Towel ring

Soap Dish

Corner shelves

Glass Shelves

W. C. Indian with PVC flushing cistern and all fixtures complete.

Wash basin with pedestal complete

Waterproofing of all surfaces as directed by EIC by cleaning the surface with wire brush/ chipping hammer to make the surface free from all loose particles, dust, etc, then Repairing all damaged surfaces, dips in the slab and damaged corner fillets (i.e Gola ) with Dr, Fixit Pidicrete URP 301 or equivalent waterproofing compound in cement and sand mortar in the ratio of 5ltr.URP : 1 cement : 4 sand. Then applying one coat of Dr. Fixit Tourch shield Primer (@ 1 ltr per 3.5 to 4 Sqm) or Equivalent with brush over the surface prepared for waterproofing. After primer coat Dr. Fixit Tourch shield membrane 3160 (3 mm thick) or equivalent is layed over all horizontal and vertical surfaces prepared with tourching and sealing of overlapped joints (Min. overlap of joints = 100 mm).including all carriages and cost of material involved.

NARESH GUPTA CONTRACTOR

QAZI aftab