Constt of 02 rooms for KV School at Kandote Pyt Kandote Block Thathri (DDC GRANT)

Amount

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil incl all carriges plate form cutting

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed:

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size). INCL CARRIAGES ALL COMPLETE.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand). INCL ALL CARRIAGES

Providing and Laying in position reinfored cement concrete 1:2:4mix. INCL ALL CARRIAGES.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size). INCL ALL CARRIAGES

Centering and Shuttering including strutting propping etc and removal of formwork. For plinth beams, lintel beams etc. all complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand). Including all carriages complete.

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five leve

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately). SAL WOOD incl all carriages complete

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded. INCL ALL CARRIAGES.

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2.

15 MM thick plaster using cement sand mortar in 1:6mix. INCL ALL CARRIAGES.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate. INCL ALL CARRIAGES

Providing wood work in frames of false ceiling partitions etc sawn and put in position. Budloo/ Fir wood Including all leads, lift and carriage complete

Providing and fixing 6 mm thick Ply wood for Ceiling all complete. Including all leads, lift and carriage complete

Providing and fixing wooden moulded corner beading of triangular shape to the junction of panneling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete second class kail wood. Including all leads, lift and carriage complete

Providing and Fixing 2nd class teak wood lipping/moulded beading 18X5mm fixed with wooden adhesive of approved quality and screws/ nails complete. Including all leads, lift and carriage complete

Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including black enamelled M.S. but hinges with necessary screws excluding, panelling which will be paid for separately. Second class deodar wood. Including all leads, lift and carriage complete

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).Panelling for pannelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle board 12 mm thick. Including all leads, lift and carriage complete

Providing & fixing 35mm thick glazed shutters for doors, windows using 10kg/ sqm (4mm thick) float glass panes incl. ISI marked M.S. pressed butt hinges bright finished of required of size with necessary screws. Second class deodar wood. Including all leads, lift and carriage complete

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : second class deodar wood. Including all leads, lift and carriage complete

Providing & fixing in position M.S. grills of required pattern in frames of windows etc with flats, sq. or round bars etc incl priming coat all complete. Fixed to openings / wooded frames with rawl plugs, screws etc. Including all leads, lift and carriage complete

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. Incl. cement primer coat all complete.

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Applying Priming coat with ready mixed pink or grey primer on wood work. All complete.

Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete. INCL ALL CARRIAGES

Providing and fixing aluminium sliding door bolts ISI marked anosided ( anodic coating not less than grade AC 10 per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 250 x 16 mm

Providing and fixing aluminium tower bolt ISI marked anosided ( anodic coating not less than grade AC 10 per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete: 150 x 10 mm

Providing and fixing aluminium tower bolt ISI marked anosided ( anodic coating not less than grade AC 10 per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:100 x 10 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : 125 mm

Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 100 mm

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sqm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch modular plate suitable G.I Box and earthing the point with 1.5 sqm FRLS PVS insulated copper conductor single core cable etc. as required (GROUP C) all complete incl MCB etc.

Wiring for heating point with 4.0 sqm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit with modular switch modular plate suitable G.I Box and earthing the point with 4.0 sqm FRLS PVS insulated copper conductor single core cable etc. as required (GROUP C) all complete. incl MCB etc.

Providing and fixing Aluminum service cable line 25sqm thick of ISI marked . Approved as per Engineer In charge all complete

CIB (citizen information Board ) size 4'00"x5'00"x0'9" (above plinth level) with tepered top having 20 degree slope in Brick Masonary(1:4) including plaster , paint, lettering and logos as per instruction of Engineer -in-charge including carriage of material. ( complete job)

SHOWET ALI BUTT

VEER TRADERS

PARTAP SINGH

FREED AHMED

GHULAM HASSAN

TASLEEM AHMED

SAJJAD AHMED

SARJEET SINGH