Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹34.2 LAccepted-AOC | 1 | Accepted-AOC L1 BIDDER | |
| 2 | 2₹38.4 L+₹3.7 L (10.6%)Rejected-Finance | 2 | Rejected-Finance NOT L1 BIDDER | |
| 3 | 3₹39.2 L+₹4.5 L (12.8%)Rejected-Finance | 3 | Rejected-Finance NOT L1 BIDDER | |
| 4 | 4₹43.2 L+₹8.5 L (24.4%)Rejected-Finance | 4 | Rejected-Finance NOT L1 BIDDER |
Tender Value
₹34 L
EMD Value
₹68,000
Closing Date
3 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH KOLKATA
GE NORTH KOLKATA 46 BT ROAD KOLKATA 50
SPL REPAIR TO PUMP HOUSE BLDG NO P 56 AT CHORDLINE AND CERTAIN REVENUE MINOR WORKS AT KANKINRA UNDER GE NORTH KOLKATA
2022_MES_536186_1
8173/22-23/E8/GE(N)/KOL/ OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
180 days
KANKINARA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE NORTH KOLKATA
₹68,000
Yes
8 Aug 2022
6 Jul 2022
4 Aug 2022
7 Jul 2022
3 Aug 2022
20 Jul 2022
Amount
Taking down chowkhat with shutter exc. 1.50 & n.exc. 4.00 Sqm each complete all as specified and as directed.
Taking down chowkhat with shutter n.exc. 1.50 Sqm each (without taking off shutter from the frames.) complete all as specified and as directed .
Material and labour Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and as directed .
Material and labour Precast reinforced cement concrete type B0, 1:2:4 (12.5 mm graded stone aggregate) in door and windows frames, any size, single or double rebated, including arrangement for fixing of hinges and fixtures as required complete all as specified and as directed .
Supply and fix 35mm thick 2nd class hard wood glazed and skeleton shutter, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutter as specified in SSR complete all as specified and as directed.
Supply and fix 35mm thick 2nd class hard wood factory madePlain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
Supply only 100 mm long MS Butt hinge , medium weight , cold rolled complete all as specified and as directed .
Supply and fix 2nd class HW Small fittings such as door stop of n.exc 200 cu.cm each complete all as specified and as directed .
Supply and fix 100mm long size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.
Supply and fix 150 mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
Supply and fix Stainless steel wire cloth of 0.36 mm nominal dia of wire and average width of aperature 1.40 mm fixed with stainless steel wire staples complete all as specified and as directed.
Material and Labour applying two coats of Synthetic enamel paint first quality over a coat of pink primer on new wooden surface exc 10 cm width or girth complete all as specified and as directed .
Material and labour for one coat of synthetic enamal paint to first quality wooden surface exceeding 10cm width or girth incl preparation of old painted wooden surfaces complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
Supply and fix Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings Fe 410 -W (GdeE- 250) qualityA (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing along with painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and as directed.
Dismantling Asbestos cement / Transluscent ( Corrugated , semicorrugated etc.) sheets as in Roof covering , wall , ridge , hips valleys and flashings etc for the building structures not exceeding 10 m height from the average ground level complete all as specified and as directed .
Supply and fix Pre-painted galvalume Zinc coating GI based corrugated steel sheet 0.50mm thick(total coated thickness) of any colour having tensile strength of 550Mpa as in roof coverings,fixed with using hot dip galvanised self drilling and self tapping screws complete as specified and as directed. Make of galvalume sheet-M/s spat industries ltd/M/s Tata bluescope &Steel Ltd(colour bond steel) or equivalent in M/s JSW Steel Ltd/M/s Bhusan Power &Steel Ltd. Note: sheet shall be coated with hot dip alloy of 55% aluminium,43.50% Zinc,1.50% diliconand finished with resin coat on both surfaces @ 150gm/Sqm of coating(total both surfaces) s specified and as directed
Supply & fix Roof trusses Fe 410 -W (GdeE- 250) qualityA (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed
Dismantling of RCC posts or struts embedded in concrete any section, including taking out embedded portion and making good disturbed ground and disposal of old debris to outside the premises complete all as specified and as directed.
All as per Item No. 20 above but embedded in natural ground.complete all as specified and as directed
Material and labour for providing cement concrete in foundations 1:3:6 type C2 (nominal mix using 40 mm graded stone aggregate) filling and mass concrete complete all as specified and directed. Note: Every Alternate post, Every lower post and all end post strut will be embedded in PCC and remaining intermediate post will be embeded in earth
Material and labour for providing reinforced cement concrete type A-1 (1:11/2: 3) nominal Mix using 20mm graded stone aggregate in precast fencing posts, straining or treminal posts, struts etc for fencing average sectional area exceeding 100 and not exceeding 250 sqcm with or without chamfered angles and flat, splayed, rounded or mitred tops including setting / fixing bolts / nibs at regular intervals wherever required for securing chain link / barbed wire as directed and fixed at position including necessary handling / transportation complete all as specified & directed. (Note : Bolts and Nibs shall be measured and paid seperately as supply only rate ) .
Supply and fix flat iron clamp for posts and struts in fencing including cutting tops to shape as directed. Drilling holes, notching for wire, etc; flat iron fillets (for securing chain links fencing etc) and similarwork conforming for FE 410-0 or Fe 310-0 complete all as specified and directed.
Fixing only flat iron clamp for posts and struts in fencing complete all as specified and directed.
Supply and fix mild steel 10 mm diameter of shank screw bolts (machine made) with hezagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exc 15 cm and n.exc 22.5 cm long complete all as specified and directed. (Bolt to be embeded into RCC fencing post while casting)
Supply only MS 10 mm dia round bars (Fe-410-W (Gde E-250 quality-A or Fe 290 (Gde - E-165)) as line wire for holding chain link mesh including applying two coats of synthetic enamel paints over a coat of red oxide zinc chrome primer complete all as specified and directed.
Fixing only MS 10 mm dia round bars (Fe-410-W (Gde E-250 quality-A or Fe 290 (Gde - E-165)) as line wire for holding chain link mesh complete all as specified and as directed.
Dismantling of old GI barbed wire fencing of any description from RCC fencing post complete all as specified & directed. (Note. Each line of wire to be measured separately)
Supply and fixing Galvanized, 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type or standard rails. Straining bolts. Including, securing or tying at crossings with and provn of galvanized mild steel wire staples or steel pins etc complte all as specified and directed (Note : Each line of wire to be measured seperately)
All as per Item No. 30 above but fixing only complte all as specified and directed. (Seaviceable barbed wire obtained from item No.29 above shall be reused).
Dismantling of old chain link fencing including MS bolt, F.I Strap, stretcher bar complete all as specified and as directed.
Supply only chain link fencing 50 mm x 50 mm mesh 4 mm thick, made out of mild steel galvanised hot drip wire including provision of binding wire completed all as specified and directed.
Fixing only chainlink fencing including line wires , any mesh , size and type to any type of standards , rails , straining bolts etc including provision of binding wire complete all as and as directed .
Taking down cement plaster on brick or stone wals, etc. including raking out joints, hacking for keys, scrubbing down with water, etc. complete all as specified and as directed .
Material and labour for rendering 15mm thick in cement mortar (1:6) on fair faces of brickwork or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed.
Material and Labour for 20 mm thick rendering with CM 1:4 in two layer , 10 mm thick in each layer and mixed with integral water proofing liquid admixture on top layer of external surfaces of brick work or concrete surfaces including finish the surface even and fair complete all as specified and as directed (Water proofing liquid admixture shall be measured and paid seperately)
Material and labour for applying three coats of white wash on new plastered surface of wall including preperation of newly plastered surface complete all as specified and as directed .
Material and labour for applying two coat of cement base paint on new plastered surface of wall complete all as specified and as directed
Preparation of old treated plastered surfaces of wall by washing, rubbing down cement base paint surfaces of wall and applying one coat of cement base paint complete all as specified and as directed.
Preparation of old treated plastered surfaces of wall and applying one coat of white wash complete all as specified & directed.
Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complte all as specified and directed.
Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complte all as specified and directed.
Supply and fix 100mm size extruded aluminum alloy handle fabricated type anodized (ISI Marked) complete all as specified and as directed.
Supply and fix 100mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.
Chases cutting in brick / stone / concrete surfaces gitrh, exc 10 cms and not exc 20 cms for concealed wiring and the like, making the surface good to match the existing in CM 1:3, etc complete all as specified and directed
Supply and fix Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.
Supply and fix Steel ventilators, fixed type, with glazing bars complete with glazing bars, dovetailed or welded complete all as specified and as directed.
Supply and fix 3.0 mm thk sheet glass ordinary quality and glazing with oil putty in square n. exc 0.50 sqm in each pane, complete as specified and as directed.
Supply and fix 3.0 mm thk sheet glass ordinary quality and glazing with oil putty in square exc 0.50 sqm in each pane, complete as specified and as directed.
Material and Labour applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel surface exc 10 cm width or girth complete all as specified and as directed .
Supply and fix Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed .
Demolition of brickwork built in cement mortar complete all as specified and as directed .
Material and Labour Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed .
Demolition of Cement Concrete(unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed
Material and labour for hard core of broken bricks of gauge n.exc 63mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed to a true surfaces, complete all as specified and directed.
Material and labour for 75 mm thick plain cement concrete 1:3:6 type C1( using 40 mm graded stone aggregate ) as in flooring / plinth protection laid in alternative bays and joints shall be filled up with bituminous gola with 80/25 bitumen ( 1 part of bitumen to be mixed with 3 part of sand ) including finish the surface even and fair complete all as specified and as directed.
Material and labour for 100 mm thick plain cement concrete 1:3:6 type C2( using 40 mm graded stone aggregate ) as in flooring/path complete all as specified and as directed.
Taking out old unserviceable floor, hearth or wall tiling including cement mortar bedding (but not backing and rubbish off the premises complete all as specified and as directed
Material and labour for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exc 0.18 sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including 15mm thick screed bed or bedding layer in CM(1:6) complete all as specified and as directed.
Material and labour for glazed ceramic colour tiles (300x200) x7mm thick in skirting/dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour tiles over and including 10mm thick rendering in CM(1:4) complete all as specified and as directed.
M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry over and including 15mm thick screed bed or bedding layer in CM(1:6)in floors complete all as specified and as directed .
Material and labour Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing 15 mm thick screed bed cm (1:6) complete all as specified and as directed.
Material and labour Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing 10 mm thick rending cm (1:4) complete all as specified and as directed.
Supply and fix in repair 15mm bore stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 90gms) complete all as specified and as directed.
Supply and fix in repair 15mm bore bib tap (Minimum weight 90gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.
Supply and fix in repair 15mm bore Pillar tap (Minimum weight 110gms) standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed.
Supply and fix in repair shower with shower arm of PTMT (Minimum weight 40gms) any colour for fixing with 15mm bore pipe complete all as specified and as directed.
Supply and fix in repair grating doom 100mm dia of PTMT (Minimum weight 25 gms) in repairs complete all as specified and as directed.
Supply and fix in repair 10 litre capacity PVC valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern including PVC connections 15mm size with brass nuts and washer both side of length 450mm complete all as specified and as directed.
Supply and fix in repairs stainless steel sink with drainage board made out of 1 mm thick sheet for kitchen with plug washers, waste pipe including bedding in cement mortar on dwarf wall or including cast iron cantiliver brackets connecting union overall size 915 X 460 mm with bowl size 405x355x178mm or 410x357x178mm complete all as specified and as directed (Model No.BSSBSD-52 of Blue Star or SBSD 05 of Joyna.).
Supply and fix in reapir vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including 'P'or 'S' trap (excluding flushing cistern and flush pipe) including provision of lime concrete bedding complete all as specified and as directed
Supply and fix in repairs vitreous china wash basin white flat back, size 630 x 400 mm including PTMT waste coupling 32mm dia (min wt 45 gm), chain and plug and porcelain stopper etc. complete all as specified and as directed.
Supply and fix in repair brass chromium plated tubular towel rail , 20mm dia, D type, 600mm long between flange fixed with chromium plated brass screws complete all as specified & directed.
Supply and fix in repairs 100mm cast iron Nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed.
Supply and fix in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or wooden beads as required complete all as specified and as directed.
Supply and fix rotational moulded polyethylene water storage tanks (multi layer) 500 ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed including taking down old unserviceable one
Supply and fix in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.
Dismantling post or struts(wood,steel or RCC) any section,including taking out embedded in natural ground portion and making good disturbed ground complte all as specified and directed
Demolition of cement concrete(reinforced) in ground floors and pavings n exe 15 cm thickness complte all as specified and directed (below or above the ground level).
Supply only integral water proofing liquid admixture for concrete and mortar. (Make :CONPLAST X421IC of Fosroc /SIKA No 1 of SIKA/equivalent brand of PIDILITE)
Dismantling expanded metal n exe 4 kg/sqm ,any thickness or mesh,fixed with steel or wood fillets if any complte all as specified and directed.
Excavation in trenches n exe 1.5m wide and n exe 1.5 m in depth for foundation etc and getting out in soft/loose soil complete all as specified and as directed
Returning,fiiling in , including spreading,levelling,watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil complete all as specified and as directed
Removing excavated material exe 50m and n exe 250m depositing where directed surplus soil and depositing where directed at level n exe 1.5m above starting point complte all as specified and directed.
Materials and labour for PCC (1:4:8) using 40mm graded stone aggregate in foundation filling and mass concrete complete.
Materials and labour for RCC(Nominal mix) type B1 (1:2:4) 20mm graded stone aggregate for Foundation,including rafts,footings, foundation beams, plinth beam complete all as specified and as directed
Materials and labour for RCC(Nominal mix) type B1 (1:2:4) 20mm graded stone aggregate for columns,pillars complete all as specified and as directed
Materials and labour for RCC(Nominal mix) type B1 (1:2:4) 20mm graded stone aggregate for Beams,cantilever, bressumers,lintel complete all as specified and as directed
Use & waste Formwork for rough finished surface to sides of concrete foundation,footing bases, and plinth beams and similar work vertical or to batter complete all as specified and as directed
Use & waste Formwork for rough finished surface to sides of concrete floor or roof beams and similar work complete all as specified and as directed
Use & waste Formwork for rough finished surfaces of concrete for pillars,post,strut,pers,columns and stanchions complete all as specified and as directed
Material and labour for mild steel TMT bars 10mm dia and over,cut to length,bent to shapee required,including crancking,bending lapping etc as required complete all as specified and as directed
Material and labour for mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups,spacers and binders,cut to length, bent to shape rquired,including cranking,bending,lapping etc as required complete all as specified and as diercted
Supply and fix rolled mild steel Fe-410(Grade E-250A) angle or tee section as in post,cut to length and bend to shape as directed,fixed independently without connecting plate etc,including provision of 05 to 07 nos of gap/cuts/holes in each post for providing/laying barbed wire complete all as specified and as directed
Supply and fix Framed work such as grillsgratings etc with end bars shouldered and/or riveted or forged into spikes,framed guard bars barred iron doors,ladders,framed balusters,walk ways,railing frame work of water tanks and similar work confirming to Fe-290 Gde-E-165 complte all as specified and directed.
Material and labour 03mm thick wall care putty on wall complete all as specified and as directed
Preparation of new plastered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.
Supply and fix Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complte all as specified and directed.
Supply and fix 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complte all as specified and directed.
Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.surfaces, complete all as specified and directed.
Taking down ceiling fan / exhaust fan / wall mounted fan from existing position of high rise shed/ bldg, dismantling blades and removing fan and blades complete all as specified and keep in safe custody/ in office store for refixing/hanging the same complete all as specified and directed by Engr-in-charge.
Hanging only ceiling fan and connecting up including provision of cable fromceiling rose or connector to fan complete all as specified and directed.
Hanging only exaust fan and connecting up including provision of cable fromceiling rose or connector to fan complete all as specified and directed.
Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete all as specified as directed, for One light point controlled by one switch complete all as specified and directed. Note : (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of chase cutting if any for wiring shall be measued and paid separately. Make of cable:-Polycab / Finolex / Havells / KEI / HPL / Plaza/ Standard / RR Kabel. Make of Conduit:- Plaza / Presto Plast / Precision / M/S AGK Industries / Finolex.
All as per item No 106 here in above but for One ceiling/ exaust / wall mounted fan point controlled by one switch and one regulator complete all as specified and directed.
All as per item No 106 here in above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.
All as per item No 106 here in above but for One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.
All as per item No 106 here in above but for One call bell point controlled by one switch complete all as specified and directed.
Material and labour for concealed point wiring (concealed type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC conduit medium grade of suitable size but not less than 20 mm and conduit accessories of adequate size with fittings and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of 16 A switches, sockets, etc and earth continuty conductor shall be connected to common earth complete all as specified as directed. Note : (i) Cost of cutting of wall, if any, for housing of GI box, ceiling rose, etc and also making good the disturbed surfaces are deemed to be included in unit rate. (ii) Cost of GI box of suitable size shall be deemed to be included in the qouted rate (iii) Cost of chase cutting for conduit wiring shall be measured and paid separately.
Supply and fix switch piano flush buttom 5 Amp single pole one way 240 volt all as specified and directed
Supply and fix socket out let 3/5 pin 5 Amp 240 volt.all as specified and directed
Supply and fix switch socket combination 3/5 pin 5 Amp 240 volt.all as specified and directed
Supply and fix switch socket combination 3/6 pin 15 Amp flush type 240 volt.all as specified and directed
Supply and fix celling fan regulator (step regulator) switch type AC 230 volt suitable for ceilling fan any sweep all as specified and directed
Supply and fix bell push 6 amps complete all as specified as directed
Matetial and labour for call bell ding dong type AC 230 volt single pole complete all as specified as directed
Matetial and labour for lamp holder PVC/Polycarbonate type with backplate suitable for battel fittings complete all as specified as directed
Supply and fix celling rose surface,3 terminal of min da 63.5mm and ISI marked all as specified and directed
Supply and fix box type luminiare, pre coated in white and pre-wired for single LED tube light 4 ft capacity suitable for single T8 LED tube rod 4ft 20 watt complete with LED tube rod T8, 20 W, 4ft long with extruded aluminium body, PC diffuser and inbuilt driver, holder, prewired fitted on two Nos 2nd class hard wood round block and connecting up with three core twisted flexible copper conductor cable of suitable size from ceiling rose to connector of tube light fitting including taking down old unserviceable fitting any type complete all as specified and as directed. Make of T/L fitting - Century LED Ltd Cat Part No. - KCCF02000863 / Philips Cat Part No. - TMC 501 P 1xT-LED 22W P3241 / Wipro Cat Part No. - WIO921208 Make of LED T/L Rod - Century LED Ltd Cat Part No. - TWPP020C / Philips Cat Part No. - MAS LEDtube 1200mm 18W865 T8 I / Wipro Cat Part No. - LL13-181-65SE
Supply and fix LED STREET light 45/40 Watt die cast aluminium housing with IP-65 protection and surface mounting device LED 45/40 Watt with lens including all fixing arrangement required to fixed with pole/ wall on existing bracket or wall including suitable size of fixing items such as clamps, nut bolts and washer of suitable size and connecting with existing electric supply with three run single core 1.5 sqmm copper conductor cable with flexible PVC conduit and making connections complete including taking down old light fitting any type complete all as specified and directed. Make - Century LED Ltd Cat part No. - SPSP045C / Philips Cat part No. - BRP 409 LED 040 CW HO MR FG S1PL PSU GR / Wipro Cat part No. - LR02-501-XXX-57-XX or equivalent in Panasonic/HPL/Crompton
Supply and fixing LED batten mirror light 10 Watt extruded aluminium body, PC diffuser and inbuilt driver, prewired with electronic driver and diffuser and all accessories fitted on including two Nos 2nd class hard wood round block to be fitted on wall / ceiling including connecting up with three core twisted flexible copper conductor cable of suitable size complete all as specified and as directed. Make : Century LED Ltd Cat Part No. BWMP010C2136 or equivalent in Wipro/ Philips/Compton
Supply and fix LED bulk head light fitting 10/12 Watt IP 65 protection with inbuilt driver prewired to be fixed on wall/ ceiling complete with all accessories and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed. Make - Century LED Ltd Cat Part No. HWAR012C0168 or equivalent in Wipro/ Philips/Crompton/Panasonic
Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 2.5 sqmm and one run of 2.5sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 20mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 2.5 sqmm cable one run of 2.5 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).
Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 4 sqmm and one run of 4 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 25 mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 4 sqmm cable one run of 4 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).
Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 4 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof with suitable size of clamp/ GI wire complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed.
Supplying, laying, commissioning and testing XLPE insulated PVC sheathed armoured heavy duty electric cable of size 16 Sqmm 2 core with aluminium conductor for working voltage upto and including 1100 volts, ISI marked to be laid on wall, fixed to pole, wall/roof with suitable size of clamp/ GI wire complete with cable end, lugs including required size of aluminium thimble for making connection including taking down old unserviceable cable of any type and size completed all as specified and directed.
Supply and fixing TPN DB 4 way double door horizontal type suitable for four pole MCB TPN as incomer including make good of damaged surface/wall including re-connection with existing earth wire to DB incuding taking out the old unserviceable one complete all as specified and as directed.Note:- MCB shall be measured and paid seperatly. Make: C&S/ INDOASIAN / L&T / Havells
Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 8 way, including taking down the old unserviceable DB complete all as specified as directed. Make: C&S/ INDOASIAN / L&T / Havells
Supply and fix powder coated sheet steel enclosure fitted with busbar, DIN channel, neutral link & earth link superline SPN DB (Double door) 4 way, including taking down the old unserviceable DB complete all as specified as directed. Make: C&S/ INDOASIAN/ L&T / Havells
Supply and fix MCB TPN 63 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed Make: C&S/ L&T/ INDOASIAN / Havells
Supply and fix MCB single pole & neutral 40 Amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed Make: C&S/ INDOASIAN/ L&T / Havells
Supply and fix MCB single pole & neutral 32 amps, 240 volts, 'C' series with all incoming / outgoing connections with proper size of lugs complete all as specified as directed. Make: C&S/ INDOASIAN / L&T / Havells
Supply and fix MCB single pole 6 to 32 amps, 240 volts, 10 KA, 'C' series with all incoming / outgoing connections with proper size of aluminium lugs complete all as specified as directed. Make - C&S/ L&T/ Indoasian / Havells
Supply and fix Blanking plate for MCB DB complete all as specified as directed.
Materials and labour for earthing complete with galvanized earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 m deep below normal ground level ) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized iron earth lead wire 4.0 mm dia length upto 7.5 mtr by means of bolts, nuts, check nuts and washers of galvanized iron or steel, earth lead wire protected by and including 15mm dia GI pipe (light grade) not exc 7.5 mtr, alternate layers of charcoal and salt, including 20 mm bore GI tubing for watering to earth electrode, earth lead connected to test point/ distribution panel /feeder pillar etc as directed including necessary earth work, concrete pit with PCC (1:3:6) type C1, pre cast RCC(1:1:5:3) type A1 cover slab duly reinforced with 8 mm dia TMT bar 150mm c/c both way and two numbers lifting handle made of TMT bar and set in cement mortar (1:4), funnel, wire mesh, all as shown in electrical plate No 3 of SSR part-1 and testing on completion including taking out old earthing complete all as specified and directed.
S&F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4mm dia galvanised iron or steel wire including taking out old wire complete all as specified and directed.
S&F GI pipe 15 mm bore 'light grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors including taking out old pipe complete all as specified and directed.
Material and labour for point wiring (surface type) with PVC insulated FRLS(Fire Retardant Low Smoke) cable 1100 volts grade unsheathed single core multi-stranded copper conductors 1.5 sqmm (nominal area) for phase, neutral and 1.5 sqmm PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N- caping (medium duty)double lock type,size of casing caping as required at site but not less than 20mm with fittings and accessories pressed steel sunken terminal box made out of 1.6 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick bakelite sheet cover for fixing switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth and earth dolly for one light/fan point controlled by one way switch complete all as specified and as directed.
All as per item No 140 here in above but for One ceiling/ exaust / wall mounted fan point controlled by one switch and one regulator complete all as specified and directed.
All as per item No 140 here in above but for One 3/5pin 6 Amp Socket outlet on the independent board complete all as specified and directed.
All as per item No 140 here in above but for One 3/5pin 6 Amp Socket outlet on the same board complete all as specified and directed.
All as per item No 140 here in above but for One call bell point controlled by one switch complete all as specified and directed.
Material and labour for surface point wiring (surface type) with FRLS PVC insulated 1100 volts grade unsheathed single core multi-stranded copper conductors 2.5 sqmm (nominal area) for phase, neutral and 2.5 sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable for earth continuty conductor drawn through and including PVC casing-N-caping / conduit pipe medium grade of suitable size but not less than 20 mm and accessories of adequate size to be fitted on wall / iron channel of shed with suitable size of fixing material such as GI wire of suitable size and accessories as required at site including suitable size of pressed steel sunken terminal box made out of 1.2 mm thick MS sheet duly painted with two coats of synthetic enamel paint of approved colour over a coat of red oxide zinc chrome primer and covered with 3 mm thick insulated hylum sheet cover for fixing of switches switches, sockets, regulator etc and earth continuty conductor shall be connected to common earth complete all as specified as directed. Note :(i) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of GI box/ switch board, ceiling rose, PVC casing caping/ conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. Note for item Nos. 135 to 140:- :(i)Cost of cutting of wall, if any, for housing of GI box and also making good the disturbed surfaces are deemed to be included in unit rate.
Matetial and labour for sub-main wiring in repairs with two run of FRLS PVC insulated unshethed single core multi-stranded copper conductor of size 6 sqmm and one run of 6 sqmm copper conductor as continuity earth wire drawn in and including PVC conduit of suitable size but not less than 20mm dia on shed/ wall / iron channel etc, including PVC fittings such as bends Tee and boxes including taking down old unserviceable sub main wiring of any size in steel/ PVC rigid conduit complete all as specified and directed (Note : (i) Two run of 6 sqmm cable one run of 6 sqmm cable alongwith PVC conduit shall be measured and paid as one unit. (ii) Cost of cutting of wall/ fixing material such as GI wire of suitable size / any item, if any, required for housing of PVC casing conduit etc and also making good the disturbed surfaces are deemed to be included in unit rate. (iii) Cost of chase cutting if any for submain wiring shall be deemed to be included in the quoted rate).
Supply and fix sheet steel enclosure fitted with plug & socket metal clad AC box with MCB SP 20A including insulated neutral link, adjustable DIN rail channel and connecting links complete after taking down the old socket board and connection complete all as specified as directed. Make - C&S/ Havells/ Indoasian
B G Trading Co.
CHOWDHURY SMALL INDUSTRIES
Kanta International
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .