SOPD work for 2018-19

Amount

Construction of Embankment with Material Obtained from Borrow Pits: Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5. ( i ) Private Land

Granular Sub- base with Well Graded Materials (Table 400.1): (A) By Mix in Place Method : Construction of granular sub-base by providing well graded materials, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

Making 120cm wide bamboo foot bridge with 100mm Bholuka or Barua bamboo posts driven 120 cm to 180 cm underground 3 Nos. in each row and rows being 3m apart bholuka or Barua bamboo dham placed over the posts and tied with cane or wire , Bholuka or barua bamboo struts in each row both up and down stream, jati bamboo long gorhs closely packed and tied with dham. Single layer of mat placed over 75mm thick brush wood and tied with bholuka or Barua bamboo rail stand fixed in one side of the bridge etc. complete.

Providing,loading & Unloading of R.S. JOIST(As per analysis rate)

Supplying and driving Azar/Nahar/Nageswar/Zarul piles 25cm to 30cm dia. Dressed to heart wood including making length in every 30 cm interval, coal tarring two (2) coats with best tar applied hot (Rate inclusive of the cost of the required quantity of tar.) Portion of pile actually driven underground

Supplying and driving Azar/Nahar/Nageswar/Zarul piles 25cm to 30cm dia. Dressed to heart wood including making length in every 30 cm interval, coal tarring two (2) coats with best tar applied hot (Rate inclusive of the cost of the required quantity of tar.) Portion of pile above ground ground

Labour for scarfing and joining piles 25 cm to 30 cm dia Dressed to heartwood 90 cm. In length includng supplying, fitting and fixing with 2 nos. of 50 mmX 10 mm MS FI clamps and 16 mm dia MS bolts and nuts etc. complete as directed

Supplying, fitting and fixing timber beam and bearing beam rectangular in size fitted with M.S. etc. supplying spikes etc. as necessary and coal tarring two (2) coats with best tar applied hot as directed (Rate is inclusive of cost of the required quantity of tar.)

Labour for making "U" shapeed flat iron strap 0.5mX0.3m size from 150mmX12mm size MS flat including providing 10 bolts holes and fitting with 0.35m long 20mm dia MS bolts including fitting tightly withbearing beam, pile and RSJ beams etc. as diected by the Department.

Labour for fitting and fixing RSJ beam, CI saddle etc. in position including necessary scaffolding, cutting them to required size, drilling holes and supplying and fixing ncessary bolts and nuts, painting two coats complete (Tar-paints to be supplied by the contractor at his own costs) including carrying from PWD Godown.

Azar or Nahar or Nageswar or zarul ofr sundi or gamari wood works including supplying , fitting , and fixing complete with necessary M.S. bolts, nuts, nails scerws etc. and coal tarring two coats with best tar applied hot (Rate is inclusive of the cost of the required quantity of tar.)

Undressed in floor planks, collars, bracing, standards, wheel guards, struts and railings, runner belts, rail, posts etc In track way planks (alternate nailing to be done with decking in a seggragate way.)