REPAIR TO COMPOUND WALLS FENCING GATES GATE PILLARS DRAINS CULVERTS HARD STANDING AND PATHS ETC IN AREA OF AGE BR II UNDER GE MAINT INF SCHOOL MHOW

Amount

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

M&L for brick work with sub class 'B' modular bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6

M&L except brick work with sub class 'B' modular bricks straight or curved on plan exc 6 m mean radius built in cement mortar 1:6

Taking down cement plaster on brick or concrete surfaces, parapets including raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and as directed

Preparation of new plastered surface and apply two coat of cement base paint over a coat of primer complete all as specified and as directed

Taking down of old galvanised steel barbed wire fencing of any description and in any position complete as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section,Posts embedded in including taking out embedded portion and making good disturbed ground Concrete, brick work, masonry, etc. etc complete.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface etc complete.

Excavating in trenches n. exc 1.5 m width and n. exc 1.5 m in depth for foundation etc or for shafts, wells,cesspits , manholes , pier holes etc n exc 10 sqm on plan and n exc 1.5 m in depth and getting out hard/dence soil complete all as specified and as directed.

Dismantling fencing wire mesh ,any type and any size complete all as specified and as directed.

Material supply only for Chain link fencing MS galvanised chin link etc complete.

Fixing only chain link fencing including line wire any mesh size and any type of standard rail s staining bolt etc including provision of binding wire etc complete.

M& L for mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for cols, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips all as specified and as directed.

M&L for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strainging bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or stel pins, etc. complete all as specified and as directed (each line wire to be measured)

Restraining & resecuring old barbered wire fencing including making good staples etc complete obtained from taking down barbered wire fencing.

Refixing old barbered wire fencing obtained from taking down from item No 7.

M&L for mild steel works as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors,balusters,nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 etc complete all as specified and as directed

Mild steel bolts, exc 11 but n. exc 15 and 75 mm long purpose made, with hexagonal or square head one end and screwed the other, or screw both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 30cm long etc complete all as specified and as directed

Demolition of plain cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed at site.

M&L for cement concrete (1:2:4) type B-2 in surface channel and drains using 40mm graded stone aggregate filling and as mass concrete complete all as specified and directed at site.

M&L for Cement concrete(1:4:8) type D2 as in foundations, filling and mass concrete using 40 mm graded stone aggregates complete.

M&L for PCC (1:2:4) type B-1(Using 20mm graded stone aggregate ) as in coping ,bearing course etc including necessary formwork complete all as specified and directed.

Dismantling stone slabs and tiles laid dry or laid dry and pointed in any mortar of any description or thickness in floors,aprons etc.

M&L for 60mm thick, grade M-35 Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish )any shape and size conferming to IS 15658-2006

M&L for 80mm thick, grade M-40 Machine Pressed Precast concrete glossy interlocking Paver block any shape and size confirming to IS 15658 - 2006 with grey cement and pigment complete all as specified and directed

M & L for 30mm thick stone grit cushioning /stone grit filling under pavement incl watering, consolidationg with clean dry sand , complete all as specified and as directed.

M&L providing Precast cement concrete (1:2:4) type B-1 (20 mm graded agg) in kerbs and edging to road and footpath etc. (i.e 80 mm thick and 45 cm to 60 cm long/ height) finished at top bullnosed shape and finished even and smooth using coloured pigment incl necessary earthwork with plain fair faces, incl chamfered wheathering, throating etc and setting in mortar(1:4) complete with joints to match all as specified and as directed

Demolition of cement concrete (unreinforced) in ground floors and paving n exc. 15cm thickness (below or above ground level) complete all as specified and directed .

M & L for 75 mm thick cement concrete (1:3:6), type C2, with using 40 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler/filler boards complete as specified and directed.

M&L for PCC (1:4:8) type D2 ,using 40mm graded stone aggregate ,as in sub base of floor complete all as specified and directed

Demolition of reinforcement cement concrete of any description and in any position in ground floor and pavings n.exc 15cm thick (below or above GL). Reinforcement cut as required to facilitate the demolition complete all as specified and directed at site.

M&L RCC (1:2:4) type B-1 slab supporting on wall ,beams, Column ,lintel band including form work complete all as specified and directed.

M&L for pre-cast RCC (1:2:4) type B1 using 20mm graded stone aggregate as in cover slab for small culvet ,manhole and soak well septic tank etc set in CM (1:4) complete including necessary use and waste of form work complete all as specified and directed at site by Engr-in-Charge.

S&F of 6 mm to 8mm dia TMT bar cut to length bent to shape required including cranking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed at site.

Returning filling soft/loose soil in including spreading,levelling,watering and well ramming in layers not exc 25 cm thick complete all as specified and directed

Removing demolished material n exc 50m and deposited where directed at level n exc 1.5 m above the starting point

S&F in repair of 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed

S & F in repair PVC (SWR) bends 110 mm bore, any radius, diminishing pieces or tapers complete.

S & F in repair PVC (SWR) junction single, (Single T) equal or unequal with access door, for 110mm bore pipes.

S & F in repairs of MS framed work such as grills gratings etc with ends of bar s shoulders and or riveted or forged into spikes framed guard bars barred iron doors ladders framed blusters walk ways ,railings frame work of water tank, gate, etc confirming to Fe-290 Gde-E-165 complete all as specified and as directed..

S & F in repairs of framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete, confirming to Fe-290 Gde E-165

Preparation of new steel surfaces of any description over 10cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer.

yash enterprises

M/S Parikshit Sharma

Chitragupta Construction

BHATIA ASSOCIATES

KAILASH CHANDRA KHANDELWAL