Const. of Administrative building at FSTP 2.0 at Landiguda

Earth work in oridinary soil within 50m initiaol lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers no exceeding 0.3m in depth and as per direction of the Engineer-in -charge.

Filling in foundation and plinth with sand watered and rammed including cost, lead & royality of sand etc complete to work site for 100 cum.

Cement Concrete in (1:3:6) with 4mm size HG Crusher Broken Metal including all cost materials labour,convyance , royality tools ans plants water for curing etc. all complete as per O.P.W.D. specification required for the work to finished items of work.

Supplying all materials, labour, T&P and providing reinforced cement concrete work of M-25 grade with 12mm and down grade black hard granite crusher broken stone chips including hoisting, laying watering, curing conveyance of all materials to worksite, payment of royality taxes etc all complete as per specification and direction of the E.I.C. Ground Floor

1st Floor

2nd Floor

Supplying all materials , labour, T&P and providing M.S reinforcement for RCC work including cutting, bending, binding and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royality, taxes etc all complete as per specification and direction of the E.I.C.

Supplying all materials , labour, T&P and providing rigid and smooth centering and shuttering for R.CC works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royality, taxes etc all complete as per specification and direction of the E.I.C. for Ground Floor RCC Foundation, footing & Coloum Base

RCC Column & Beam

Lintel

RCC Roof Slab , Chaja etc

stair case

For 1st Floor RCC Coloumn & Beam

Lintel

RCC Roof Slab , Chaja etc

stair case

second floor Roof Slab

Coloumn

Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks (23cm x 12cm x 8 cm) having crushing strength not less than 75kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as per specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing brick work with Fly Ash bricks (23cm x 12cm x 8 cm) having crushing strength not less than 75kg/cm2 with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as per specification and direction of the E.I.C. Ground Floor

1st floor

second floor

Supplying all materials, labour, T&P and providing 16mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as per specification and direction of the E.I.C. Ground Floor

1st Floor

second floor

Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:6) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as per specification and direction of the E.I.C. Ground Floor

1st Floor

second floor

Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) to RCC surfaces finished smooth including closed deep chipping and slurry tratment including watering, curing, conveyance of all materials to worksite, payment of royality, taxes etc all complete as per specification and direction of the E.I.C. Ground Floor

1st Floor

Second Floor

Supplying, fitting & fixing of vetrified floor Tile of size 600 x 600 mm of approved make laid on 25mm thick cement mortar (1:4) & finishing joints with white cement etc. Ground floor

1st Floor

Supplying all materials, labour, T&P and providing granite tiles in slab, treads and landing on 25mm thick bed of cement mortar 1:1(1 cement : 1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge. Ground Floor

1st Floor

2nd Floor

Supplying all materials, labour, T&P and providing ceramic tiles in floors, treads and landing on 25mm thick bed of cement mortar 1:1(1 cement : 1 sand) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge. Ground floor Toilet

FF Toilet

Supplying all materials, labour, T&P and fixing porcelain glazed tiles in dados skirting on 12mm thick cement plaster (1;3) joined with neat cement slurry mixed with pigment to match the shades of the tiles etc all complete as per direction of the Engineer in charge. Ground Floor

1st Floor

Providing fitting, fixing of AI. Door with anodized AI. Door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member with frame section 9221 with tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour, T&P , hire charges of drilling machine, labour charges etc. complete including cost of laminated board.

Supplying, fitting & fixing up window (sliding type) made up aluminium section 9778 as window frame section no. 4095, 4096 and 9777, 3994 as shutter frame with 5mm. Thick plain glass as panel fitted with rubber bending including lucking arrangement including all fittings including cost of materials all taxes, labour, T&P including cost of black glass etc complete as per direction of Engineer in Charge.

Supplying all materials labour, T&P and providing and fixing in position M.S. panelled door double leaved with M.S. frame overall size including frame 1980mm Height x 1070mm Width made out of the following materials conforming to relevant indian standard specification, Frame 35x35x6mm MS angle, Shutter stile; Top and bottom rail 25x25x3mm, MS angle door panell 1.0mm C. R. Sheet panell stiffner covering width of each leaf 19x5mm MS flat 3nos on each leaf, Hinges size 10mm-6 nos (3nos on each side) bought out as per ISS hold fast 35x35x6mm. MS angle 175mm length bifurcated at the tip-3nos on each side. Handle: 19x5mm MS flat fabricated-4nos. AIdrop: 2nos bought out as per ISS. Tower bolt 2nos bought out as per ISS, Approximate weight-54kg including conveyance of all materials to worksite, payment of royality, taxes etc all complete as per specification and direction of the E.I.C.

Supplying, fitting & fixing of M.S. window grill of approved design

Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilsed Isopthalic Gelcoat and one layer of 450gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic palyester resin . The thikness of the skins shall not be less than 1.50mm Expanded Polystyrone(EPS) structural adhesive compatible with (EPS) foam panel of 29mm thickness and a density of 20kg/cu mtr shall be usedas core material Wooden reinforcements and the skins. The materials and process for manufacturing the door shutters shall conform to RV TIFAC composites Design Centre's standards and specification and the door shutters tested in conformation to IS 4020-1998. The finish of door shutter will be plain colour white/ Ivory/Beige/light grey/ Mahogany/Teak wood or any other colour using high quality pigments Three heavy whight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.

Factory made FRP (alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement. Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S. flat hold fast shall be provided with the frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ ivory/ beige/ Light grey/ Golden brown/Mahogany/Teak wood/sand stone/champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C.

Supplying all materials, labour, T&P and fixing Aluminum frame glass louvers for ventilators

Supplying all materials, labour, T&P and Finishing wall surface of walls with Acrylic wall putty (Water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete.

Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer all complete as per specification and direction of the EIC (For Plastering surface)

Supplying all materials, labour, T&P and wall painting 2 coats with plastic Emulsion Paint of approved shade on new work to give an even shade.

Supplying all materials, labour, T&P and finishing walls with water proofing weather coat of approved shade on new work tow coats to give an even shade etc all complete as per specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing painting 2 coat with any approved enamel paint on new iron work all complete as per specification and direction of the E.I.C.

Supplying all materials, labour, T&P and providing priming 1 coat with any approved primer over iron work all complete as per specification and direction of the E.I.C.

Supplying all materials, labour, T&P and fitting and fixing on wall face U-PVC SWR (rain water) ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails bobbins and wooden plugs including jointing with supply of approved rubber lubricant by non-heat application method/ as per manufacturer's specification, testing etc all complete as per P.H specification and direction of the E.I.C.

Back filling the foundation with excavated earth

Disposal of surplus eath

Supplying, fitting and fixing of Stainless steel of 304 grade in hand railing using 50 mm dia of 2mm thick circular pipe with brustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials , labour, T&P etc. required for the complete in all respect.

Dismantling and reinstallation work of 10KW roof top Solar Power plant from First floor to Second floor with dismantling of solar pannels, blocks, module rewiring, civil foundation for inverter, inverter installation, AJB reinstallation, installation and commissioning of system, solar log activation and monitoring, any other additional items required.

Dismantling and removing RCC columns, beams, slabs, staircase landing, lintels including stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the E.I.C.

Supplying and fixing of 60 mm thick cement concrete interlocking Paver block of M-30 grade of approved make design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IRC SP-63 2018

Supplying and fixing of Precast Kerb stone of size 300mx300mmx150mm of M-30 grade of approved make design, colour and size made by Block making machine with proper compaction laid in required pattern etc. complete in all respect confirming to IS-5758 1984

Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and fammed including conveyance of all materials to worksite, payment of royality, taxes etc all complete as per direction of the E.I.C.

Drilling suitable holes in reinforcement or plain cement concrete with power driven drill machine to a minium depth of 100 mm upto 200 mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-in-charge. Upto and including 12 mm dia.