Construction work of CC floor and Extension of boundary wall and installation of teen shad near Ram Janki Mandir Ward No. 55 file No. 735/25X3/6

Supplying and filling in plinth under floors including, watering, ramming consolidating and dressing complete. Hard copra

Earth work in excavation for foundation, trenches for pipes / cables or drains etc. by mechanical means / manual means (exceeding 30cm in depth.) including ramming of bottom, dressing of sides, disposal of excavated earth including of all lift and lead upto 50m. Disposed earth to be levelled and neatly dressed. 2.6.1 All kinds of soil

Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in foundation and plinth. 6.1.2 Cement mortar 1:6

15 mm cement plaster of mix : 13.12.1 1:3 (1 cement: 4 fine sand)

12 mm cement plaster of mix : 13.1.2 1:4 (1 cement: 4 sand)

Providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smoothcomplete.

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm).

Centering and shuttering including strutting, propping stretching etc. complete for and removal of form work by sheet plate or ply wood shuttering for 19.1.6 PLINTH BEAM ,BEAM

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement concrete grade M-10 (Nominal Mix) with 40 mm maximum size of stone aggregate

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering All work up to plinth level. Cement concrete grade M-20 (Nominal Mix) with 20 mm maximum size of stone aggregate

Providing & fixing corrugated Galvanised steel (CGS) sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in orizontal/vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m²

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete:

Please Enable Macros to View BoQ information