Loading
Loading…
Loading…
Tender Value
₹38.2 L
EMD Value
₹76,400
Closing Date
3 Oct 2026, 6:00 pm
GE DINJAN
GE DINJAN PO PANITOLA DISTT DIBRUGARH
SPL REPAIR TO BLDG NO T-3 (JCOs LIVING) AND SPL REPAIR TO BATHROOM BLOCK OF BLDG NO P-13 (OR LIVING) UNDER DINJAN MIL STN
2026_MES_789249_1
C/8203/E8
Open Tender
Civil Works
Item Rate
180 days
DINJAN MIL STN
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE DINJAN
₹76,400
Yes
14 Sept 2026
14 Sept 2026
10 Oct 2026
14 Sept 2026
3 Oct 2026
28 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | B/R WORKS :
Demolition of cement concrete in ground floor n exc 15 cm thick (un reinforced) complete all as specified and directed. | 5.05 | Cum | - | - |
| 2 | Taking down chowkats or frame, n. exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed. | 66 | Each | - | - |
| 3 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exe 1.50 & n.exc. 4 sqm in each complete all as specified and directed. | 14 | Each | - | - |
| 4 | S&F solid PVC moulded door frame of size 50mmx47mm made out of 5mm, single side prelam PVC sheet used and edges will be painted to match with printed to match with prelam sheet, reinforced with MS square tube & fixing in opening including hold fast of suitable size complete all as specified and directed. | - | RM | - | - |
| 5 | S&F factory made solid PVC Moulded door shutter 28 to 30mm thick (Stiles) with 2,4 or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on front face & 2 mm plain colour PVC sheet on back face, supplying and fixing in frame at site complete all as specified and directed. | 18.53 | Sqm | - | - |
| 6 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing in SSR Part II 2020 complete all as specified and as directed | 8.61 | Sqm | - | - |
| 7 | S&F 100 mm size stainless steel butt hinges medium weight cold rolled complete all as specified and directed. | 45 | Each | - | - |
| 8 | Supply and fix 150mm long aluminium handles, cast type, anodised complete all as specified and as directed. | 30 | Each | - | - |
| 9 | Supply and fix 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed. | 30 | Each | - | - |
| 10 | S&F 30mm thick Flush shutters, solid core construction, with particle board core and plywood face panels with particle board core complete all as specified and directed. | 4 | Sqm | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.32 MB
FINALTENDER8203.pdf
Tender Documents • 1.81 MB
BOQ_884732.xls
BOQ • 3.99 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .