HIMUDA Colony at flowerdale Shimla SH C o proposed M S parking near Block No. 1

Amount

Cutting in earth work through mechanical means in all heights/depths and in all kinds of soils such as Kankar, moorum, shingle and decomposed of soft rock, or hard rock i.e. tjeir intermediate classification amd chiselling/wedging out of rock where blasting prohibited including saturated soils and filling in embankments etc.wherenecessary and disposal of excavated unserviceable material in all leads and lifts including through mechanical transporation.and disposed of surplus material on approved dumping site nothing extra on this account will be paid Any damage to the private /public property during execution will be restored by thethe nature of the same may be the unserviceable material will be stacked in specified dimension in all leads and lifts as per the direction of the Engineer-in-charge.

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed by the Engineer-in-Charge.All kinds of soil.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size).

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing cources, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing: 1:3:6 (1 cement: 3 coarse sand): 6 graded stone aggregate 20 mm nominal size.

Centering and shuttering including strutting, propping etc, and removal of from work for: Foundations, footings, bases for columns

Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc.

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, pillars, Piers, Abutments, Posts and Struts

Steel reinforcement for R.C.C wok including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of graded Fe- 500 D or more.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge.(Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level.

All works above plinth level up t o floor all level

Random rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including, leveling up with cement concrete 1:6:12( 1 cement : 6 coarse sand :12 graded stone aggregate 20 mm nominal size) at window sills, ceiling level and the like. Cement mortar 1:6 (1 cement : 6 coarse sand)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) Columns,beam,trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished seamless type tubes

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufactures specification: Painting Steel work witrh Deluxe Multi Surface Paint to give and even shade. Two or more coat applied @ 0.90 ltr /10 sqm obrt sn unfrt vost og ptimrt spplirf @ 0.80 ltr/10 sqm of approved brand and manufacture

Providing weepholes in brick masonry / stone masonry /plain reinforced concrete abutment, wing wall, return wall with 100 mm dia PVC pipe extending through the full with of the structures with slop of 1(v):20(H) towards drawing face complete as per drawing and technical specification clauses 614, 709, 1204.3.7

Sandeep Chandel