REPAIRS TO FENCING, COMPOUND WALL AND CONNECTED ITEMS AT INS CHILKA UNDER GE CHILKA

Amount

M&L for excavating in post holes(or similar holes)in soil each n.exc 0.5 Cum ,getting out,returning ,filling in and ramming earth or broken rubble mixed with earth around ,in layers not exceeding 25 cm,as specified and directed by Engr in Charge.

Dismantling of post or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground post embedded in Concrete, brick work, masonry, etc. all as directed by Engr-in-Charge.

M&L for mild steel hand rails, half round or other stock section or core for wooden hand - rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed drilling holes, notching for wire, etc flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting etc and similar work conforming to FE-290 Gde E-165 complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any Description not otherwise provided for complete all as specified and as directed.

S&F mild steel screw bolt (machne made with hexogonal or square heads at one end and screwed the other or screwed both ends each screwed end to be filled with washer one nut 11 to 15 mm dia shank and exc 10 cm and n.exc 15 cm complete all as specified and as directed.

S&F 10 mm round bars as in securing of chain link fencing conforming to FE-290 Gde E-165 complete all as specified and as directed.

Demolition of Concrete of any description and in any position not otherwise specifically provided for and removing the debris to a distance not exc 50m from site complete all as specified and as directed.

M&L for cement concrete 1:3:6 Type C-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Dismantling fencing wire mesh of any type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size (100X100) of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed..

Supply only 4 mm dia M S galvanized steel wire, 100X100 mm mesh in chain link fencing, complete all as specified and as directed.

S&F welded steel wire fabric mesh to wood or steel members weight not exceeding 4 Kg/ Sqm complete all as specified and as directed

S&F in repair netting PVC plastic mesh of any approved colour minimum thickness 2 mm with aperature 1 inch approx complete all as specified and as directed.`

Taking down galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts all as directed

Fixing only galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured ) complete all as specified and as directed.

S&F galvaniseed. 2 strand , steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and stranding and fixing to any type of slandered rails straining bolts, including, securing or tying at crossing with clips complete as specified and directed.

M&L for preparing new steel surfaces of any description, not otherwise describe over 10cm width or girth and applying two coats of synthetic enamel paint over red oxide zinc chrome primer all as specified and directed.

M&L for preparation of new steel surfaces n.exc 10cm in width or girth and applying two coats of synthetic enamel paint over red oxide zinc chrome primer all as specified and directed.

Demolition of brick works or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches pillars, etc but excluding ashlar facing, dressed stone works and precast concrete article complete all as specified and as directed.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation,filling and mass concrete complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for RCC (nomial mix) type B1 1:2:4 with using 20mm graded stone agg in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M & L for Reinforced cement concrete type B1 1:2:4 with using 20mm graded stone agg in columns, pillars, piers, posts and struts complete all as specified and directed.

Use and waste for fair finished form work to sides of pillars, posts, struts, columns and stanchions circular on plan complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter and finished concrete flat complete all as specified and directed.

S&F TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

S&F TMT bar 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed..

Taking down plaster of any description on brick or stone walls, ceilings, fins, fascias, chajjas, parapets etc (incluidng tiles racking out joint hacking for key scrubbning down with water etc incl patches of any size complete all as specified and as directed.

M&L for 15 mm thick rendering in cement mortar 1:6 on brick or concrete surfaces finished even and smooth (without using extra cement)complete all as specified and as directed

M&L for preparation of newly plastered or unplastered surfaces of wall or concrete surface and applying two coat cement base paint complete all as specifed and as directed.

M&L for complete removal of existing treatment of old decorated surfaces of wall surface applying two coat of cement base paint on the same complete as specified and as directed.

M&L for preparation of old steel surfaces over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparation of old steel surfaces n.exc 10cm in width or girth and applying one coat of synthetic enamel paint all as specified and directed.

M&L for preparing old decorated plastered or unplastered surfaces of wall including cornices, pilasters, and other wall features etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds mass and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint on the same all complete as specified and as directed.

M&L for complete removal of existing treatment of old decorated surfaces of wall surface applying two coat of exterior weather coat anti dust emulsion paint exterior grade of approved shade over a coat of alkali guard anti efflorescence primer as per manufacturer's instruction , complete all as specified and directed.

S & F Framed work as in doors or gates of angle or other section conforming to Fe 410 -W (GdeE- 250) qualityA with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

D RAVICHANDRAN (BID ID -3066309)

SAHADEV PALAI (BID ID -3068699)

M/S SRI SAI SRINIVASA CONSTRUCTIONS (BID ID -3066105)