AGE I 41 23 24 REPAIR MAINTENANCE AND PAINTING OF FURNITURE UNDER AGE I CG NOIDA

Amount

Removing of existing wornout nylon newar from charpoy GI Pipe, tightening all check nuts elbow, long rail, legs etc to hold the charpoy tight and supply & fix mild steel square tube of size 20mm, 1.6mm thick, 3 feet long 03 Nos to the GI frame (long rail) by welding at equal distance, including fixing commerical plywood 12mm thick MR grade screw down to the GI pipe with appropriate machine screw and nut complete all as directed. Also the steel surface of Charpoy is to be painted by applying two coats of Synthetic enamel paint over a coat of primer.

Removing of existing 12mm thick commercial plywood from charpoy GI pipe and supply and fix commerical plywood 12mm thick MR grade screw down to the GI pipe and mild steel squre tube with appropriate machine screw and nuts complete all as directed.

NOTE :- 1. POLISHING WILL BE DONE ON WHOLE WOODEN SURFACE OF FURNITURE AND NOT ONLY ON REPLACED PARTS. 2. ALL MELAMINE POLISH WORK WILL BE DONE WITH COMPRESSOR.

Removing the existing unserviceable Front legs carefully from Chair Dinning and replacing the same with new teak wood leg made of 1st class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of same size and shape including applying Melamine polishing to required gloss complete. Colour of Polish as decided by AGE(I)

All as per serial item No. 3 above but rear leg

All as per serial item No. 3 above but Front rail / rear rail / side rail.

All as per serial item No. 3 above but back

All as per serial item No. 3 above but stiffener

Removing the existing unserviceable Front/Back legs carefully from Chair Easy and replacing the same with new teak wood leg made of 1st class hard wood teak (MP) free from knots , cracks etc with permissible moisture contents, timber components of same size and shape including applying Melamine polish of Make : Melamine by Asian Paints / Nerolac / Berger Paints strictly as per manufacturers instructions. Colour of polish as approved by AGE(I).

All as per serial item No 8 above but Arm

All as per serial item No 8 above but Front Rail / Back Rail of seat

All as per serial item No 8 above but Side Rail of seat

All as per serial item No 8 above but Top / bottom rail of back

All as per serial item No 8 above but Side Rail of back

Removing the existing unserviceable Front leg carefully from Chair Writing and replacing the same with new teak wood leg made of 1st class hard wood teak (MP) free from knots , cracks etc with permissible moisture contents, timber components of same size ,shape etc including applying Melamine polishing to required gloss complete. Colour of Polish as decided by AGE(I)

All as per serial item No 14 above but Rear Leg

All as per serial item No 14 above but Stiffener

All as per serial item No 14 above but Arm Rest

All as per serial item No 14 above but Side Rail / Front Rail / Back Rail.

Removing the existing unserviceable head rest of bed ply wood top and supply and fixing new head rest and applying Melamine polishing to required gloss complete. Colour of Polish as decided by AGE(I).

All as per srl item No 19 above but foot rest

All as per srl item No 19 above but MR plywood top 12 MM thick confirming to IS-303. Make of ply : Kit ply / Archid ply / Green ply.

All as per srl item No 19 above but long rail of teak wood.

Removing the existing unserviceable top from Table centre and supply and fix new top made out of 18/19 mm thick prelaminated MDF board including 4 mm thick Teak Wood beading alround the top and applying Melamine polish. Colour of polish as approved by AGE(I).

Removing the existing unserviceable leg from Table centre and supply and fix new leg made of 1st class hard wood teak (MP) free from knots, cracks etc with permissible moisture contents, timber components of same size, shape etc. and applying Melamine polish as per manufacturers instructions. Colour of polish as approved by AGE(I).

All as per srl item No 24 above but side rail

All as per srl item No 24 above but front rail / rear rail

Removing the existing unserviceable top from Peg Table and supply and fix new top made out of 18/19 mm thick prelaminated MDF board including 4 mm thick Teak Wood beading alround the top and applying Melamine polish (to whole teak body of chair) as per manufacturers instructions. Colour of polish as approved by AGE(I).

Removing the existing unserviceable leg of PegTable and supply and fix new leg made of 1st class hard wood teak (MP) free from knots , cracks etc with permissible moisture contents, timber components of same size, shape etc. and applying Melamine polish as per manufacturers instructions. Colour of polish as approved by AGE(I)

All as per srl item No 28 above but side rail

All as per srl item No 28 above but front rail / rear rail

Taking out old unserviceable cushioned seat or back from Chair Dinning Cushioned and Supply and fixing new cushioned seat or back made out of 75 mm thick ,32 density foam duly covered & stiched. Note : Tapestry cloth shall be of make Bombay Dyeing / Raymond Furnishing / D'Decor. Colour of cloth shall be as approved by AGE(I) Make of foam : Sleep Well / Springwell

Removing of existing unserviceable cushion seat / back from sofa sets, of size 21" X 22" and supply and fixing 100 mm thick cushion of 32 density foam duly stiched Note : Tapestry cloth shall be of make Bombay Dyeing / Raymond Furnishing / D'Decor. Colour of cloth shall be as approved by GE Make of foam : Sleep Well / Springwell .

Cutting/taking out old unserviceable cane from chair dinning, Chair easy , Chair writing, Stool dressing, Chair CB without arm, Chair Tipup, Bin soiled and supplying, recanning of chair with white/ cream palstic cane 2mm wide and canning border with 3.5/4mm wide cane as per Godrej pattren.

M/s Kapil Furniture

ASHUTOSH BUILDERS