REPAIR REPLACEMENT OF CHEQUERED TIELS INTERLOCKING TIELS HARDSTANDINGS PERIMETER FENCING WORKS AND OTHER MISCELLANEOUS BR WORKS IN SECTOR C UNDER AGE BR I OF GE 865 EWS

Amount

Demolition of cement concrete in ground floor and pavings n'exc 15cm thickness (below or above ground level complete all as specified and as directed.

Demolition of cement concrete in any description and any position not otherwise specifically provided for, complete all as specified and as directed.

M & L for 75 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as plinth protection finished even and smooth with out using extra cement, complete all as specified and as directed.

M&L Forming Contraction (Dummy) joints 50 mm deep x 10mm wide for plinth protection & similar work , filled with sealing compound Grade 'A' in plinth protection, complete all as specified and as directed.

M & L for 100 mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in floor of hard standing finished even and smooth with out using extra cement all as specified..

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in floor surface of hard standing, complete all as specified and as directed.

M & L for 75mm PCC 1:3:6 type C-2 using 20mm graded aggregate as in sub base of floor all as specified and directed.

M&l for PCC type D-2(1:4:8) using 40mm graded crushed aggregate as mass conc and filling of foundation all as specfed and drected.

M&L dressed granite or trap Kerb stones roughly squared stones of size 20cm x 30 cm ,so that the maximum depression from a straight edge held against the dressed surface shall noot exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck finish ( rate included for removal of old damaged curb stones of any description), complete all as specified and as directed.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings etc, complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 80mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 60mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge.

M&L machine pressed precast concrete interlocking paver block any shape and size polished with grey cement and pigment confirming to IS 15658-2006 of 40mm thickiness M-35 grade complete all as specified and as directed by Engr-in-Charge.

M&L sand filling (50 mm average thickness) under floors in foundations and for laying Interlocking paver blocks including watering and consolidation complete all as specified and as directed by Engr-in-Charge.

M&L for Cement concrete type D-2,1:4:8 (40mm graded aggreate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings etc, complete all as specified and as directed.

M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6) and all as directed by Engr-in - charge.

Taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering on other than fair faces of brick works in two layers 10 mm & 5 mm thick using water proofing compound for outer layer of 5mm thick finished even and fair without using extra cement in cement mortar 1:4 complete all as specified and as directed.

M&L for preperation of new plastered wall surface of any description and applying three coat of white wash complete all as specified and as directed.

M&L for preperation of new plastered wall surface of any description and applayng two coat of cement based paint complete all as specified and as directed.

M&L for preparation new steel surfaces of any description, not otherwise described, over 10cm width/girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed

M&L for preperation of new surfaces on Brick,Concrete,Wall and Stone surface of any descripton and applying two coat of synthetic enamal paint over one coat of primer complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applayng two coat of white wash complete all as specified and as directed.

M&L for preperation of old plastered wall surface of any description and applayng one coat of cement based paint complete all as specified and as directed.

Dismantling chain link fencing/expanded metal or mesh not exceeding 4kg/Sqm fixed in steel, wood fillets, concrete post etc. of any description. complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete all as specified and as directed by Engr-in-Charge.

Demolition of precast concrete block walling built in cement mortar including all quoins, arches , pillars etc all as specified and as directed.

Demolition of stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc and removing demolised material out of Military station all as specified and as directed.

M&L pre-cast cement concrete(20mm graded crushed stone aggregate) 1:3:6 type C-1 as in block masonery exc 10cm in width with solid block masonery with solid blocks,exc.10cm in width and setting in cement mortar 1:6 , complete all as specified and as directed.

M&L for pre cast cement concrete block masonary (except blocks) of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, using old concrete blocks obtained from the demolition, exc.10cm in width, set and jointed in cement mortor 1:6 complete all as spd and directed.

M&L random rubble stone masonary well bonded bedded solidily hearted in CM 1:6.in retaining wall abutment and similar work, complete all as specified and as directed.

Walling (Except stone) of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, using old stones/boulders obtained from the demolition complete all as specified and as directed.

Extra over stone walling for hammer dressing for lime sand store n'exc 40mm deep when held against edge complete all as specified and as directed.

Dismantling wall/floor and ceiling boards (fiber, pulp, inlsulation, blankets) any thickness including covered fillets and supporting members complete all as specified and as directed

Dismantlng wooden fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in secton.(Framed work) complete all as specified and as directed.

S&F anodised aluminium snap grid of size 605 x 605mm , frame work of false ceiling including hangers 6mm dia G.I (up to 1200mm length ) adjusting level fixed to roof slabs by means of ceilling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed by Engr -in-charge

M&L providing and fixing Gypsum board 6mm thick and 600x600mm in size in ceiling fixed with screw or with staples on snap grid as per manufactures instructions, complete all as specified and directed by Engr-in-charge

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section.complete all as specified and as directed.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section.complete all as specified and as directed.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws complete all as specified and as directed.

M&L in repair for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding complete all as specified and as directed.

M&L in repair for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in ceiling panelling, shelves/boarding complete all as specified and as directed.

Dismantling boarding / wooden flooring of any description ,fixed in any positon complete all as specified and as directed.

M&L for hard wood 2nd class factory made wooden boarded floors 10mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture all as specified and directed.

M & L for Excavating in post holes in so(or similar holes) each n.exc 0.5 cum in hard/dense soil , getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25cm, complete all as specified and as directed.

M&L for PCC type C-2, (1:3:6) , using 40mm graded crushed stone aggregate as in lean conc , sub base ,or mass conc , foundation filling etc, complete all as specified and as directed.

Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards,rails, straining bolts,etc.including provision of binding wire, complete all as specified and as directed.

Supply only chain link MS galvanised fencing of size as directed by Engr-in-charge.

Dismantling of old barbed wire and making rolls including stacking neatly complete all as specified and directed by Engr-in-Charge.

S & F in repairs Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) incl removal of old unservicebale barbed wire, complete all as specified and directed.

S&F mild steel wind ties for roof including securing bolts, posts & struts for fencing including cutting tops to shapes as directed,including all necessary drilling,bolting or reveting etc and similar work confirming to Fe-290, Gde-E-165 complete all as specified and as directed.

S & F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete drilled for fixing of steel sheeting or other covering. Doors, etc, to be prepared for hanging or sliding with and incl either hooks and hinges or steel hanging door fittings (exclusive of steel,) sheeting or other covering, running rails and guides) and hanging, also fastening and fixing complet, Fe 410-W (Gde-E-250) quality A, complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition), all as specified and as directed.

M&L for precast cement concrete Type B1, 1:2:4 (20mm graded aggregate) in landings, cover slabs (for manholes etc), chullah hoods, chhajja, water troughs, shelves and similar articles with plain faces, setting in CM 1:6, complete all as specified and as directed.

Mild steel TMT bars 10mm dia and over (for tie bar of chain link fencing), cut length, bent to shape required , including cranking , bending spirally for hooping for coloumns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips .

Deduct Schedule of Credit of Rs (-) 117530.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

PARIDHI CONSTRUCTION (BID ID -3297940)

Rampal Singh Contractor (BID ID -3292675)

M/S MUNEER HASSAN AKHON (BID ID -3293318)

ABID CONSTRUCTION COMPANY (BID ID -3292112)

Horizon Construction Company (BID ID -3292928)