Construction of Rain Shelter on link road to village Kashlog at Kashlog

Earthwork in excavation for structures as per drawing and technical specification clause 305.1 including setting out construction of shoring and bracing ,removal of stumps and other deleterious materials and disposal upto all leads and lifts dressing of sides and bottom and backfilling in trenches with excaveted suitable materials as per MORD Specification directed by Engineer-In- Charge

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete and as per direction of Engineer-in- Charge

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. i/c all leads , lifts & carraige of material and as per direction of Engineer-in- Charge

Providing and laying concrete for plain /reinforced concret in open foundation complete as per drawings and technical specifications MORD clause 802,803,1202 &1203 including carriage of materials in all leads and lifts. a)P.C.C 1:3:6.(1 Cement :3 sand : 6 Agg. 20mm nominal Size) i/c carriage of material within all leads & lifts as per the direcion of Engineer In-Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for Foundations, footings, bases for columns i/c all leads , lifts & carraige of material and as per direction of Engineer-in- Charge

Brick work with common burnt clay machine moulded perforated bricks of class designation 12.5 conforming to IS:2222 in super structure above plinth level up to floor five level in cement mortar 1:6 (1cement : 6coarse sand) With Modular bricks i/c all leads , lifts & carraige of material and as per direction of Engineer-in- Charge

15mm Cement plaster in single coat on the rough side and fair side of brick/ concrete/ stone walls for interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. including all leads , lifts & carraige of material. ( Cement Mortar 1:6 (1 Cement isto 6 Sand).

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth within all leads and lifts and as per direction of Engineer-in- Charge.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete within all leads and lifts and as per direction of Engineer-in- Charge.

Providing and fixing M.S. B.P. sheet1.66 to 2 mm thick in eaves board / facia / soffits / ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per HP. PWD. Specifications of 1990 vplume-I including carriage of materials, labour, tool and plant through all modes of transportation within all leads and lifts and as per direction of Engineer-in- Charge.

Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces) including carriage of materials within all leads and lifts and as per the direction of Engineer-In- Charge .

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete (Size of Tile 600x600 mm)

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete 0.63 mm thick with zinc coating not less than 275 gm/m² carriage of materials in all leads and lifts and as per the direction of Engineer-in-Charge.

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing , polishing all comp. and within all leads and lifts. as specified and as directed by the Engineer-in-Charge

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture as specified and as directed by the Engineer-in-Charge

Providing supplying and fixing precast cost iron garden benches six feet long setting of 3 person capacity finished painted with all accesses as per stranded specifications with all leads, lifts and other incidental charges of site of work with all direction of Engineer-in-Charge at site including all incidentals The rates are inclusive of octroi, royality, malkana, toll tax, sale tax. GST or other taxes imposed by the Government.