Public Toilets Upgradation

Amount

Clearing grass and removal of the rubbish upto a distance of 50 m outside the periphery of the area cleared.

Removal of unserviceable soil including excavation, loading and disposal upto 1000 m lead but excluding replacement by suitable soil which shall be paid separately as per Clause 305

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:3:6 (1 cement:3coarse sand : 6 graded stone aggregate 20mm nominal size

Reinforced cement concrete work in beams , suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:2:4 (1 cement : 2coarse sand : 4 graded stone aggregate 20mm nominal size).

Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers.- Using steel sheet with M.S.frames

Reinforcement for R.C.C work including straightening , cutting , bending , placing in position and binding all complete - Thermo - Mechanically treated bars (TISCON / VIZAG / IISCO /SAIL / JSW) including placing the M30 grade Athees make cover block @ 60cm centre to centre

Brick work with common burnt clay F.P.S(non modular ) bricks of class designation35in superstructure above plinth levelupto floor five level in all shapes andsizes in - cement mortar 1:4 ( 1 cement : 4coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 35 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part 1) non- decorative type, core of block board construction with frame of 1 st class hardwood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S.Piano hinges IS : 3818 marked with necessary screws

Providing and fixing IS:3564 make aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete

Providing and fixing factory made uPVC doorframe made of uPVC extruded sections havingan overall dimension as below (tolerance +_1mm ), with wall thickness 2.0 mm (+-0.2mm), corners of the door frame to be jointedwith galvanized brackets and stainlesssteel screws , joints mitred and plasticwelded. The hinge side vertical of theframes reinforced by galvanized M.S.tube ofsize 19 x 19 mm and 1mm (+-0.1mm) wallthickness and 3 nos. stainless steel hingesfixed to the frame complete as permanufacturer's specification - Extrudedsection profile size 48 x 40 mm

Providing and fixing to existing doorframes - 30 mm thick factory made PolyvinylChloride (PVC) door shutters made ofstyles and rails of a uPVC hollow sectionof size 60 x 30 mm and wall thickness 2 mm(+- 0.2 mm) with inbuilt decorativemoulding edging on one side . The stylesand rails mitred and joint at the cornersby means of M.S. galvanised / plasticbrackets of size 75 x 220 mm having wallthickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced byinserting galvanised M.S.tube of size 25x20mm and 1mm (+- 0.1mm) wall thickness . Thelock rail made up of 'H' section , a uPVChollow section of size 100 x 30 mm and 2 mm(+-0.2 mm) wall thickness , fixed to theshutter styles by means of plastic /galvanised M.S. 'U' cleats. The shutterframe filled with a uPVC multichamberedsingle panel of size not less than 620 mm,having overall thickness of 20 mm and 1 mm(+_ 0.1mm) wall thickness . They panelsfilled vertcally and tie bar at two placesby inserting horizontally 6 mm galvanisedM.S.rod and fastened with nuts and washers, complete as per manufacturer'sspecification(For W.C. and bathroom door shutter)

Tile work in skirting, risers of steps and dado (upto 2m height) over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3kg/sqm including pointing in white cement mixed with pigment of matching shade complete. Marble tiles (Polished) Raj Nagar. 8mm thick

Providing and laying rectified glazed ceramic flooring tiles of size 300x300 mmor more (thickness to be specified by themanufacturer), of commercial quality conforming to IS :15622 , of approved make( Somany / Nitco / Johnson) in colourswhite, ivory, grey, fume red brown, laid on20mm thick cement mortar 1:4 (1 cement : 4coarse sand) , including grouting thejoints with white cement and matchingpigments etc., complete

Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete.

Lime concrete terracing on roofs of required thickness laid to fall with 25mm nominal size brick aggregate and 50% lime mortar 1:2 (1 lime putty : 2 surkhi) rammed and finished with gur and belgiri treatment complete including rounding of junctions with parapet wall complete 80 mm thick, over the roof slab

Providing and fixing on wall faceunplasticised rigid PVC rain water pipesconforming to IS: 13592 Type A, includingjointing with seal ring conforming to IS :5382, leaving 10mm gap for thermalexpansion, (i) Single socketed pipes - 110mm diameter

12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand)

20mm cement plaster of mix -1:4 (1 cement :4 fine sand)

White washing with lime to give on even shade - three or more coats)

Finishing walls with water proofing cement paint of required shade - (Two or more coats applied @ 3.84 kg/10 sqm)

Painting steel work with deluxe multiurface paint to give an even shade. Two or more coat applied @ 0.90 ltr / 10 sqm overan under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture.

Demolishing R.C.C work manually / bymechanical means including stacking ofsteel bars and disposal of unserviceablematerial within 50 metres lead

Demolishing brick work manually / bymechanical means including stacking ofserviceable material and disposal ofunserviceable material within 50 metreslead - in cement mortar

Dismantling doors, windows and clerestorywindows (steel or wood) shutter includingchowkhats, architrave, holdfasts etc.complete and stacking within 50 metres lead- of area below 3 sq.metres.

Dismantling doors, windows and clerestorywindows (steel or wood) shutter includingchowkhats, architrave, holdfasts etc.complete and stacking within 50 metres lead- of area beyond 3 sq.metres

Dismantling tile work in floors and roofs laid in cement mortar including stackingmaterial within 50 metres lead - forthickness of tiles 10mm to 25mm

Dismantling old plaster or skirting rakingout joints and cleaning the surface forplaster including disposal of rubbish tothe dumping ground within 50 metres lead

Supplying fixing and commisioning of Suguna/ Texmo /Sharp 1 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc. complete

Providing & fixing white vitreous china water closet squatting pan (Indian type)along with "S" or "P" trap including dismantling of old WC seat and "S" or "P"trap at site complete with all operations including all necessary materials, labour malba , all complete - Orissa patternW.C.Pan of size 580x440 mm

Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe

Providing and fixing ASTM pipes includingall ASTM plain& brass threaded fittings i/cfixing the pipe with clamps at 1.00mspacing . This includes jointing of pipes &fitting with one step ASTM solvent cementand testing of joints complete (Internal work exposed on wall ) - 20mm nominal outerdia pipes

Providing and fixing ASTM pipes includingall ASTM plain& brass threaded fittings i/cfixing the pipe with clamps at 1.00mspacing . This includes jointing of pipes &fitting with one step ASTM solvent cementand testing of joints complete (Internalwork exposed on wall ) - 25mm nominal outerdia pipes

Providing and fixing ASTM pipes includingall ASTM plain& brass threaded fittings i/cfixing the pipe with clamps at 1.00mspacing . This includes jointing of pipes &fitting with one step ASTM solvent cementand testing of joints complete (Internalwork exposed on wall ) - 32 mm nominal outerdia pipes

Providing and fixing ASTM pipes includingall ASTM plain & brass threaded fittingsi/c fixing the pipe with clamps at 1.00 mspacing . This includes jointing of pipes &fitting with one step ASTM solvent cementand the cost of cutting chases and making good the same including testing of jointscomplete (Concealed work including cuttingchases and making good the walls etc.) - 20mm nominal outer dia pipes

Providing and fixing CP brass long nose bib cock of approved quality confirming to IS standard and weighing not less than 810 gm- 15 mm nomial bore

Providing and fixing gun metal gate valve with CI wheel of approved quality (screwed end) - 25 mm nominal bore

Providing and fixing CP brass bib cock of approved quality conforming to IS 8931- 15mm nominal bore

Constructing brick masonry chamber forunderground C.I. inspection chamber andbends with bricks in cement mortar 1:4 (1cement : 4 coarse sand) C.I.cover withframe (light duty) 455 x 610 mm internaldimensions , total weight of cover withframe to be not less than 38 kg (weight ofcover 23 kg and weight of frame 15kg),R.C.C. top slab with 1:2:4 mix (1 cement :2 coarse sand : 4 graded stone aggregate 20mm nominal size) foundation concrete 1:5:10(1 cement : 5 fine sand : 10graded stoneaggregate 40mm nominal size ), insideplastering 12mm thick with cement mortar1:3 (1 cement : 3 coarse sand) finishedsmooth with a floating coat of neat cementon walls and bed concrete extra complete asper standard design - inside dimensions 455x610 mm and 45 cm deep for single pipe line- with common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5

Making soak pit 2.5m diameter 3.0 metre deep with 45x45cm dry brick honey comb shaft with bricks of class designation 35 and S.W drain pipe 100mm diameter, 1.8m long complete as per standard design with brick of class designation 35.

Providing, laying and jointing UPVCpipes(Finolex / jain / Supreme / Truebore /Nandi) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to site lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends,tees, threaded pieces, couplers, reducer, endcapsetc.,complete all as per IS and CPWDspecification-110 mm dia

Supply of Polyethylene water storage tank-upto 5000 litres (Sintex ISI )

Supplying and fixing of following size of PVC conduit along with the accessories in surface/recess conduit including cutting the wall and making good the same in case of recessed conduit as required Make Avon plast/Vijaya-20 mm dia

Supplying and drawing of 1.5 sq.mm FR PVC insulated, cooper conductor, single core cable in the existing surface/recessed, PVC/steel conduit/PVC casing and capping as required make Havells/L&T:-

Supplying and fixing SP 1 way 5/6 amps pinoa/flush type switch on the existing switch box cover including connections as required make: Kundan/Anchor/Vinay:-

Supplying and fixing of 36W CFLwith pendant Holder with all connection etc.complete

Removing sludge and contents from Septic tank by suction pumping and disposing it to the nearby Sewerage system

Construction of underground Brick masonry sump of size 2.0x1.5x2.0m with brick wall in CM 1:4 and RCC 1:2:4 cover slab of15cm thick including earth work excavtion ,sand filling and flooring with Cement concrete 1:2:4 and including centering ,shuttering , reinforcement and plastering with CM 1:4 12mm and 20mm thich outside and inside respectively and also providing and fixing CI inspection cover of size 45x45cm as per drawing. etc... complete as directed by the Engineer incharge.

Construction of compound wall with half brick work in CM 1:4 along with 23x23cm brick pillar for a height of 1.5m including earth work excavtion , sand filling and foundation concrete of 1:5:10 and plastering the wall surfaces with CM 1:4 and finishing the wall with water proofing cement paint of (Two or more ) coats over white washing of (Two or more) coats as per drawing. etc... complete as directed by the Engineer incharge.

Painting and Lettering for signages and informations

Repairs to plaster of thickness 12mm to20mm in patches of area 2.5 sq.metres andunder including cutting the patch in propershape, raking out joints and preparing andplastering the surface of the wallscomplete including disposal of rubbish tothe dumping ground within 50 metres lead -with cement mortar 1:4 (1 cement : 4finesand) (Patch work)

Providing and fixing wash basin with CI brackets, 15mm CP brass pillar taps 32 mm CP brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china flat back wash basin size 450x300 mm with single 15mm CP brass pillar taps.

Raking out joints in lime or cement mortarand preparing the surface for repointing orreplastering , including disposal ofrubbish to the dumping ground within 50metres lead

Supplying and Fixing of of the following sizes of TW board on recess including the cutting wall and finishing the surface good the same as required-150x100x50 mm deep

Providing and fixing of following size phenolic coated sheet on the existing wooden board 150x10ox3 mm tk

Supply, delivery of automatic , wall mounted Sanitary Napkin incinerator with 1000 W capacity capable of burning @ 15 per at a Time

Supplying and fixing of steel grill work of m.s. angles,flats,squares and pipes including cost of welding charges, fixing in position in masonry walls with cement concrete 1:2:4 (1 cement : 2 course sand : 4 graded stone aggregate 12.5mm nnominal size) including one coat of priming coat etc. complete.

P PAVADAI