PROVISION OF STANDBY TROLLY MOUNTED 30 KVA DG SET PROVISION OF DG SET 62.5 KVA FOR ONLINE COMPUTER BASED KNOWLEDGE ROOM T167 168 and 169 AND SPECIAL REPAIR RENEWAL OF BER E and M APPLIANCES AT AFS SAMBRA

Amount

Supply, install, testing and commissioning of acoustic proof trolly mounted diesel engine driven generating set, fully wired, 415 Volts, AC, 3 phase 4 wire, 50Hz having capacity 24KW/30 KVA continuous rating at power factor 0.8 (lagging) as per IS-4722 and connections as per IE rules complete with liquid cooled 4 stroke Diesel engine with electric start with 12Volts DC battery, developing minimum 42 BHP at 1500 RPM under NTP prevailing at Sambra area, Belagavi considering derating factor and shall conform to IS:10000/150 3026/BS-5514 with provisions of 10% over loading for 1 hour for every 12 hours running with A1 class governing and all standard safety type, screen protected, revolving field, self excited, self regulated alternator conforming to BSEN-60034 with IP 23 protection complete with integrated AMF control panel with microprocessor based relays/MCCB/MCBs/Contactors, multifunction meter showing KWH, KVA, PF, Amps, Volts, frequency, indicating lamps, 12 Volt battery charging unit including 12 Volts battery etc required as per latest standard engineering Engine : Model 4BTAA3.9GIV of Cummins

practices including sound proof canopy designed to meet MoEF/CPCB Norms of 75 dBA at 1mtr at 75% load, fabricated from CRCA sheet and structural/sheet metal base frame with high quality noise absorbent and fire retardant grade acoustic insulation material conformity to IS : 8183 and integrated fuel tank of capacity not less than minimum 8 hrs running fuel filling arrangement from inside duly painted after necessary pre treatment process complete all as specified and as directed. Make : Kirloskar / Greaves Cotton / Ashok Leyland / Cummins Make of Alternator: Stamford / Kirloskar / Crompton Greaves Note: (i) Quoted rate is deemed to be included the cost of erection of (Material & labour) DG set on trolley as per the recommendation of OEM. (ii) Quoted rate is deemed to be included the cost of fuel and other expenses for carrying out acceptance test of the DG set.

Supply, jointing, testing and commissioning of Low Tension (LT) underground, XLPE insulated, armoured, heavy duty, electric power cable, cross sectional area 3.5 core 50 Sqmm aluminium conductor 1100volts grade including both side connection with cable lugs etc, complete all as specified and as directed.

Supply and install ON LOAD change over switch 4 pole 63 Amps 415 Volt in sheet metal enclosure type (suitable for open execution and to be fitted in the standard control panel or as per site requirement) complete all as specified and directed

Supply of four tyre trolley with Axle and other accessories suitable for mounting following equipments etc as per site requirement complete all as specified and directed. :- (i) 30 KVA DG Set (All as per item No 1 above (ii) LT panel with change over Switch all as per item No 6 above (iii) LT UG XLPE Cable of 3.5Core 50 sqmm 60 RM

M & L Earthing complete with Copper earth plate electrode 600x600x3.15 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to Copper Strip 20x3mm by means of bolts and nuts check nuts and washers of copper all as specified and as shown in electrical plate no.3 of SSR part I including necessary earthwork excavation in any type of soil, PCC 1:3:6 type C1 chamber with 40 mm thick RCC cover 1:2:4 type B1 with reinforcement TMT 8mm dia 150mm bothways, GI funnel with wiremesh, 15 mm dia light grade pipe for protection of earth electrode, 20 mm dia watering pipe all as specified and directed and tested on completion.

Supply , install, testing and commissioning of LT feeder pillar box AC 415 Volts, 50 HZ, 3 Phase 4 wire totally enclosed self supporting structure / cubicle, fully compartmentalized type, suitable for outdoor use, with bottom cable entry with suitable cable glands, structure made out of 3.15 mm thick CRCA steel sheet over angle iron 40X40X3 mm frame work and legs welded on trolley, suitable mounting arrangement for bus bars voltmeter, ammeter, changeover switch and MCCBs, hinged doors at front with suitable locking arrangement, provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated , complete of suitable size for accomodating the following accessories all as specified & directed :-

BUSBAR :- (i) copper bus bar 200 Amps, 415 Volt , supported on non hygroscopic fibres, studs and brass screws for mounting -04 Nos INCOMER:- (a) MCCB 4 pole 63 Amps with breaking capacity 16 KA adjustable thermal and magnetic setting - 01 Nos INDICATING DEVICES (a) LED Indicating lamps for Main Supply indicating R, Y, B set of 3 (b) Digital Metering Unit with ammeter, Voltmeter and Phase Indicator - 03 Nos OUTGOING FEEDERS (a) MCCB 4 pole 63 amps, breaking capacity 10 KA adjustable thermal and magnetic setting - 01 Nos (b) Compartment for 63 Amp Change Over Switch

Supply, install, testing and commissioning of acoustic proof diesel engine driven generating set, fully wired, 415 Volts, AC, 3 phase 4 wire, 50Hz having capacity 50KW/62.5 KVA continuous rating at power factor 0.8 (lagging) as per IS-4722 and connections as per IE rules complete with liquid cooled 4 stroke Diesel engine with electric start with 12Volts DC battery, developing minimum 83 BHP at 1500 RPM under NTP prevailing at Sambra area, Belagavi considering derating factor and shall conform to IS:10000/150 3026/BS-5514 with provisions of 10% over loading for 1 hour for every 12 hours running with A1 class governing and all standard safety type, screen protected, revolving field, self excited, self regulated alternator conforming to BSEN-60034 with IP 23 protection complete with integrated AMF control panel with microprocessor based relays/MCCB/MCB's/Contactors, multifunction meter showing KWH, KVA, PF, Amps, Volts, frequency, indicating lamps, 12 Volt battery charging unit including 12 Volts battery etc

required as per latest standard engineering practices including sound proof canopy designed to meet MoEF/CPCB Norms of 75 dBA at 1mtr at 75% load, fabricated from CRCA sheet and a structural/sheet metal base frame, with high quality noise absorbent and fire retardant grade acoustic insulation material conformity to IS : 8183 and integrated fuel tank of capacity not less than minimum 8 hrs running fuel filling arrangement from inside duly painted after necessary pre treatment process complete all as specified and as directed. Make : Cummins / Kirloskar / Greaves Cotton / Ashok Leyland Make of Alternator: Stamford / Kirloskar / Crompton Greaves Note: (i) Quoted rate is deemed to be included the cost of PCC foundation as per the recommendation of OEM. (ii) Quoted rate is deemed to be included the cost of fuel and other expenses for carrying out acceptance test of the DG set.

Supply, install, testing and commissioning of LT feeder pillar box AC 415 Volts, 50 HZ 3 Phase, 4 wire totally enclosed self supporting structure/cubicle, fully compartmentalized type, suitable for outdoor use, bottom cable entry with suitable cable glands, structure made out of 3.15 mm thick CRCA steel sheet over angle iron frame 50X50X5 mm and legs grouted in PCC (1:2:4) type B1 foundation block with suitable mounting arrangement for bus bars, voltmeter, ammeter, changeover switch and MCCBs, hinged doors at front with suitable locking arrangement, provision of louvers at sides , structure treated under 8 - tank metal treatment process and duly powder coated complete of suitable size for accomodating the following accessories :-

Taking down existing un-serviceable Voltage stablizer of any capacity and deposited to MES store yard all as specified & directed

Taking down existing un-serviceable Air conditioners of any capacity and deposited to MES store yard all as specified & directed

Taking down existing un-serviceable Solar water heaters of any capacity and deposited to MES store yard all as specified & directed

Taking down carefully unserviceable MCBs/Metal socket of any specification & size all as specified and as directed

Taking down existing unserviceable PPR /CPVC pipe from wall, floor etc all as specified and as directed

Taking down existing sub main wiring with aluminum conductor cable of size 2.5 / 4 / 6 sqmm with GI earth wire on and including wooden batten and making good distrurbed surface of walls and roofs complete all as specified and as directed

S & F Switch Modular type, single pole 16 Amps, One Way, AC 230V, 50HZ supply, weather proof all as specified and as directed

S & F Socket Modular type, single pole, 6/16 Amps, One Way AC 230V, 50HZ supply weather proof all as specified and as directed

S & F Voltage stabilizer of capacity 4.0 KVA for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 Volts with output voltage stabilized at 230 Volts with accuracy of ± 2.5% all as specified and as directed

Supply and installation of Hi wall Split Air Conditioner of capacity 1.5 TR, indoor/outdoor units complete with cordless remote control unit and with in- built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 all as specified and as directed

Supply, Install, Testing and Commissioning of 'Solar water heating system' with heat exchanger type of capacity 100 LPD with electrical heating back up by 2Nos of 2KW heating elements & thermostats, with Flat Plate Collectors and laser welded tube, stainless steel hot water storage tank, S S heat exchanger made of S S 304 pipes of gauge 8 SWG inside the hot water storage tank with angle iron structure of required size for collector and suitable angle iron staging for hot water tank grouted in PCC 1:2:4 type B1 block including electrical connection from solar water heater to sheet metal plug top with not less than 3core 2.5sqmm multistranded PVC insulated copper wire as require at site complete all as specified and as directed

Supply, Install, Testing and Commissioning of 'Solar water heating system' with heat exchanger type of capacity 200 LPD with electrical heating back up by 2Nos of 2KW heating elements & thermostats, with Flat Plate Collectors and laser welded tube, stainless steel hot water storage tank, S S heat exchanger made of S S 304 pipes of gauge 8 SWG inside the hot water storage tank with angle iron structure of required size for collector and suitable angle iron staging for hot water tank grouted in PCC 1:2:4 type B1 block including electrical connection from solar water heater to sheet metal plug top with not less than 3core 2.5sqmm multistranded PVC insulated copper wire as require at site complete all as specified and as directed

M & L mild steel angle or tee sections, fixed independently, without connection plate, etc for staging of makeup water tank (Fe-290 Gde E 165) including necessary drilled holes, welded together all as directed.

M&L rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) double layered of capacity 250 Lts, hoisted and fixed in position all as specified & directed

M & L for 3 layer PP-R polypropylene random copolymer pipes of 20 mm outer diameter fixed to walls, ceilings or in floors, SDR 7.4 & (PN-16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as specified & directed

S & F PP-R gate valves (brass insert) as per requirement of the site suitable for 20 mm outer dia of pipes all as specified & directed

S&F Bib taps, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe/ PPR pipe of 15mm dia or for brass ferrule all as specified & directed

M & L Sub main wiring two single core PVC insulated copper conductor cable 4 sq mm 1100 Volts grade, drawn through and including suitable size of non-metallic PVC rigid conduit and conduit accessories / casing and capping fixed up on walls, roofs, or floors including one run of 4 sqmm PVC insulated cable earthing wire and connecting up complete all as specified and directed. Note:- 3 runs of 4 sqmm cable and one run of PVC conduit / casing & capping will be measured as one unit length.

S & F Single pole and neutral enclosure with two pin and earth plug and socket with 20 amps MCB SP complete all as specified and directed.

L-7 Primewave Communications

SAMPATH ENTERPRISES

ASHIRWAD ELECTRICALS