COMPREHENSIVE REPAIR TO WATER SUPPLY INSTALLATION UNDER AGE B/R-I OF GE JAIPUR

Amount

M & L for Preparation of old plastered surfaces of Ceiling, washing & rubbing down ,stopping of distempered & painted surfaces, removing nail, making good hole cracks etc, work in patches, repair with putty & applying two coats of white wash with Brush etc, complete all as specified & directed

M & L for complete removal of existing surface & preparation of old plastered surfaces of wall, washing & rubbing down, stopping of distempered & painted surfaces, removing nail, making good hole cracks etc with ,work in patches, repair with putty & applying two coats of cement base paint with Brush etc, complete all as specified & directed

M & L for preparation of old steel painted surface and applying one coat of synthetic enamel paint etc, complete all as specified & directed

M & L for Preparation of old plastered surfaces of wall, washing & rubbing down ,stopping of distempered & painted surfaces, removing nail, making good hole cracks etc ,work in patches ,repair with putty & applying two coats of distemper oil emulsion over a coats of wall care putty with hand roller complete all as specified.

M & L for one coats painting with synthetic enamel paint to old wood or wood based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work etc, complete all as specified & directed

Demolition of cement concrete in any description and any position not exc 15cm thickness (below or above ground level)

M & L for broken stone or boulders for hardcore of gauge not exc 63mm, deposited , spread and levelled in layers not exc 15cm thick watered and rammed to a ture surface

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid in dry or laid dry and poited

M & L for Machine pressed precast rubber moulded concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with colour pigmemt laid over and including 25mm thick sand cushion layer complete

All as per item No 9 above but except tiles

M & L for rubber moulded chequered cement concrete tiles 20cm x 20cm x 20mm thick , set , jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over and including 20mm thick screed bed in CM 1:6 etc, complete all as specified & directed

All as per item No 11 above but except tiles

M & L for precast PCC blocks as in curve stone in CM (1:3:6) mix type C-1 using 20 mm graded aggregated with plain or interlocking joints as directed complete in walls setting in CM (1:6) etc, complete all as specified & directed

M & L for 100 mm thick plain Cement Concrete1:4:8 type D-2 (40mm graded aggregate) in sub base of floors etc, complete all as specified & directed

M & L for 40mm thick plain Cement Concrete1:2:4 type B1 (20mm graded aggregate) in sub base of floors etc, complete all as specified & directed

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles etc, complete all as specified & directed

M & L for brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall complete all as specified.

All as per item No 17 herein before but except brick

Taking down cement plaster or cement lime plaster on brick / stone surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc, complete all as specified & directed

M & L for rendering 15mm thick on stone masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement etc, complete all as specified & directed

M & L for rendering 15mm thick on fair faces of brick work or concrete surfacel in CM 1:4 finished even and smooth without using extra cement etc, complete all as specified & directed

M & L for preparation of new plastered wall surfaces and applying two coats of cement base paint on wall etc, complete all as specified & directed

M & L for granite (of any type), 16mm to 18mm work (table rubbed and polished) in steps, jamps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc, complete all as specified & directed

M & L for machine cut kota stone slab flooring 20-25mm thick,size of kota stone 450x450 mm over and including cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc, complete all as specified & directed

M & L for diamond polishing of kota/Marble flooring including jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and directed .

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in PCC Concrete on ground and making good disturbed ground etc, complete all as specified & directed

Dismantling structural steel work including doors, gates but excluding framed truss etc, complete all as specified & directed

S&F rolled mild steel work as in Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the lenght directed) and similar work conforming to Fe-290 GdeE-165 etc, complete all as specified & directed

M & L for cement concrete (1:4:8), type D-2 using 40mm graded stone aggregate as in filling of misc including necessary form work complete all as specified.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-410 Gde E-250 etc, complete all as specified & directed

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging also fastening and fixing etc, complete all as specified & directed

S&F in repair mild steel round bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for chain link fening ( in new or old ) etc, complete all as specified & directed

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil etc, complete all as specified & directed

Dismantling galvanised chain link fencing of any description fixed to any type of fencing posts etc, complete all as specified & directed

Supply only chain link fencing 4 mm dia galvanized steel 100mm x 100mm mesh fixed to angle iron fencing post or angle frame etc, complete all as specified & directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc, complete all as specified & directed

S&F screw bolts (machine made) with hexagonal or square head at one head and rounded the other or screwed both end each screwed end to be fitted with washers and one hexagonal or square nut exc 10cm nexc 15cm long dia of shank 11 to 15mm etc, complete all as specified & directed

S&F as in repair galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc as directed.

M & L for preparation of new steel surface of any description n. exc 10cm in width or girth when un connecting to other painting surface and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified

M & L for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering etc, complete all as specified & directed

Dismantling wrought iron or mild steel work of any description nototherwise provided for etc, complete all as specified & directed

S & F steel work in tubular/ square/ rectangular trusses incl special shaped washer etc, complete using ERW orinduction butt welded tubes conforiming toIS 1161-1979 graded St-240

M & L for prearation of new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified

M & L for plain cement concrete type B1 1:2:4 ( 20mm graded aggregate) as in lintels, cills steps, seismic and other similar bands , copings, kneelers, apex stone bed plates , kerb ,water troughs and like including weathering, slightly rounded or chamfered angles and throating etc, complete all as specified & directed

S&F Sign board made out of 03mm aluminum composite panel both side alongwith retro reflective sheeting on both side with letters, stops, commas, short lines, dashes, hyphen, brackets etc of 100-150mm size fixed on 75mm dia SS grade 304 Pipe of 3 mtr long vertical pipe and frame of composite panel made with 60 mm dia ss Grade 304 pipe rectangular pipe complete all as specified and directed. Note: Area of sign board shall be measured for payment

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness etc, complete all as specified & directed

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises etc, complete all as specified & directed

M & L for 25mm thick plain cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in floor etc, complete all as specified & directed

M & L for coloured non skid ceramic tiles 300x300x7mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 etc, complete all as specified & directed

M & L for coloured glazed non skid joint free tiles 400x400x7 to 8mm thick in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over & including 15mm thick screed bed in CM 1:6 complete all as approved and directed

M & L for coloured glazed joint free ceramic tiles 450x300x7 to 8mm thick in vertical surface as in skirting over & including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as approved and directed

M & L for coloured glazed joint free ceramic tiles 300x150x7 to 8mm thick in vertical surface as in skirting over & including 10mm thick rendering on stone masonry surfaces or surfaces other than fair faces of brick work in CM 1:4 complete all as approved and directed

S & F in repair galvanised mild steel wire cloth 0.63 mm nominal dia of wire & average width of aperture 1.40mm and fixed with stainless steel wire staples etc, complete all as specified and directed

Taking down of shutters of any description exc 1 sqm but n exc 2 sqm each etc, complete all as specified and directed

Taking down door chowkaht or frame of any description area n.exc 1.50 Sqm each without taking off shutters from the frame etc, complete all as specified and directed

Taking down door chowkaht or frame of any description area exc 1.50 Sqm but n exc 4 sqm each without taking off shutters from the frame etc, complete all as specified and directed

S&F anodised aluminium powder coated frame of standard section for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

S & F 35mm thick factory made plain, framed, paneled door shutters kiln seasoned and chemically pressure treated second class, hardwood (two panels) with lock rail and panel of 9mm thick BWP commercial marine grade ply wood bonded with high quality liquid phenol formal dehyde synthetic resin adhesive confirming to IS-710. The size of rails and style shall be as per IS-1003 etc, complete all as specified and directed

S & F 35mm thick factory made second class hardwood glazed and skelton door shutter kiln seasoned and chemically treated, open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete. The size of members of shutters shall be as specified in MES SSR Part-I etc, complete all as specified and directed

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube of 1.25 mm thickness suppling & fixing in opening as per specification & drawing. Make - Rajshri, Sintex or equivalent as approved by GE

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

S & F 300mm long mild steel sliding door bolt clip type stove enamelled black with bright bolt not less than 12mm dia with & including a min of six bolt & nut, four on bolt plate & two on staple plate etc, complete all as specified and directed

S & F 150mm long mild steel pressed handles oval type stove enamelled black etc, complete all as specified and directed

S & F 125mm long aluminium handles, cast type anodised etc, complete all as specified and directed

S & F 150mm long mild steel barrel tower bolt stove enamelled black with bright bolt and fixed etc, complete all as specified and directed

S & F 125mm long aluminium anodised barrel tower bolts of extruded section and fixed etc, complete all as specified and directed

S & F 100mm butt hinges medium weight cold rolled mild steel and fixed etc, complete all as specified and directed

S & F in repair 3mm thick plain sheet glass ordinary quality and glazing with oil putty and fixing of glazing pin with metal frame in sqaures not exc 0.5 sqm in each pane etc, complete all as specified and directed

S /Or 4 mm thick plain sheet glass ordinary quality and glazing with oil putty in sqaures not exc 0.5 sqm in each pane etc, complete all as specified and directed

Dismantling old unserviceable RCC / PVC water tank & removal from site complete all as directed capacity exceedind 250 ltr and not exc 500 ltrs etc, complete all as specified and directed

S & F 500 Ltrs capacity rotational moulded polyethylene water storage tanks double layered (cylindrical vertical with closed top) hoisted and fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe pipe etc complete all as specified in SSR Part I, etc, complete all as specified and directed Make - Sintex or eqivalent or equivalent as approved by GE

S & F in repair towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) etc, complete all as specified and directed Make- Prayag or equivalent as approved by GE

S&F in repair CP brass shower rose with swivel joints, including shower arm 15mm dia, 125mm long with bend of 45 degree with flange of CP brass complete all as specified.

S&F in repair Vitreous china squatting pan Orisa pattern, size 580X440 mm white with intergral foot rest, with pvc valve syphonic action type flushing cistern, low level white ,with inlet, ball valve, float and handle including brackets 10 ltr capacity flush pipe of pvc 32mm dia for low level cictern etc, complete all as specified and directed

S&F in repair vitreous china wash basin , white flat back size 550X400 mm including brackets , 32 mm dia waste coupling of PTMT (min weight 450 gms) 25mm dia PVC waste pipe 75 cms long with necessary fixing arrangement ,fancy type pillar tap 15 mmcast copper alloy with capstan head cromium heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts etc, complete all as specified and directed

S&F in repair vitreous china bowl urinal flat back size of 465X355X265mm white(minimum) with grating and urinal for discharge pipe, 25mm dia PVC waste pipe and pvc connection 450 mm long of 15 mm size , PTMT Spearder 15 mm dia ( min weight 50 gms) with necessary fixing arrangements etc, complete all as specified and directed

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm etc, complete all as specified and directed

S&F in repair grating doom 100mm dia of PTMT (min weight 25 gms) etc, complete all as specified and directed

S&F in repair waste coupling of PTMT (half or full threaded) etc, complete all as specified and directed

S&F shelf of PTMT fixed to wall with steel screws and PVC rawl plug complete all as specified.

S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass shelf 12CM wide with chromium plated bracket guard and railing 60 CM long complete all as specified.

S&F 15mm bore fancy type stop valve / angle valve of cast copper alloy chromium plated screwed down, high pressure with crutch or butter fly handles screwed both ends for iron pipe or for unions complete all as specified.

S&F in repair bib taps 15mm bore short body cast coper alloy CP fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for union complete all as specified and directed. (Cat Part No : F330003) etc, complete all as specified and directed Make : Hindware or equivalent as approved by GE

Taking up or down steel tubing and connection, including cleaning 15 mm bore etc, complete all as specified and directed by Engineer-in-Charge

Taking up or down steel tubing and connection, including cleaning 20 mm bore etc, complete all as specified and directed by Engineer-in-Charge

S&F in repair 15 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

S&F in repair 20 mm dia steel water tubing, galvanized, medium grade, with all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge

M & L for greasing and easing of rolling shutter of size not exc 13 Sqm alongwith the guide channel, helical spring, anchoring and all other as to work the shutter in eary way etc, complete all as specified and directed

S&F 1.25mm thick Steel rolling shutters, with ball bearing,safety lock , lath of rolling shutter as specified incluidng top cover, anchrong rod, hasp and staple and one shp coat of primer; eerected in position as indicated, coimplete; push pull or manual type etc, complete all as specified and directed

Less Schedule of Credit

M/S HARI CONSTRUCTION

UNIVERSAL INFRAPROJECT PVT LTD

Shree Karni Electrovision

M/S Anil Enterprises

MSR INFRATECH