Shifting of existing lines and sub-station (from Gopinathpur Singhanath road Chhak to Gopinathpur Bridge) due to widening and strengthening of Gopamathura Bangurusingha road from 0.00 km to 5.00 km for the year 2025-26

Gopinathapur Singhanath road chhaka : - Construction of 11KV line with road crossing DP - 2nos (Ref.: - SLD-1) DP Without AB Switch WPB (GI) Pole 160x152 (13Mtr. Long, 30.44KG/Mtr.)-DP for road crossing (Total Pole Weight with Base Plate & Stiffner=395.72 KG+10.74 KG= 406.46 KG)

Top Channel(GI) 100X50X6mm, 9.56 KG/Mtr., each Channel(GI) length 2.3 mtr., 2 no's Channel(GI) required =( 2x9.56x2.3)

Fish Plate(GI) 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280)

Double Pole Belting Channel(GI) 75X40X 4.8mm., 7.14KG/Mtr., each Channel(GI) length 1.66 Mtr., 4 no's Channel(GI) required =( 7.14x1.66x4)

50x50x6mm.GI Bracing Angle(GI), 4.5Kg./mtr., each Angle(GI) length 2.671 mtr., 4 nos Angle(GI) required = (4.5x2.671x4)

Danger Plate, 2 no's.

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 2 no's = (2x0.59x0.510)

H.T. Stay clamp, 50x8 mm. Flat(GI), 3.14Kg/Mtr., 0.551 Mtr. Length, 2 no's qty. required ( 1 Pair)

H.T. Stay set (Complete )

H.T. Stay Insulator Type-C

7/10 SWG Stay Wire 15kg /stay

Gi Pipe Earthing 40mm. 3 Mtr. Long

50x6mm Flat(GI) for earthing, 2.36kg/mtr., (2.5 mtr. For mesh formation and 2.5 mtr. For raising)= 5x2.36

GI barbed wire anticlimbing device 3 Kg. Per support, 2 no's qty. required =(2x3kg)

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 8 no's = (8x0.59x0.510)

11 KV pin insulator polymer

H W fitting(B&S) 70KN, 3Bolt

Disc insulator (B&S) 70 KN polymer

WEDGE CONNECTOR FOR 55 SQMM.CONDUCTOR

POLYCARBONATE BIRD GUARD

GI Nut , Bolt & Washer of different sizes (12.261 Kg each DP without AB Switch)

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Fixing of complete 11KV line Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts BA will do the excvation including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size ( 500mmx500mmx800mm) using 20mm BHG metal with all labour and material as per TPCODL Drawing & Standard.

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX2200mm) = 0.55Cu.mtr(Per Pole)

Couping ratio 1:1.5:3(M-20 Grade) with dimension (500X500X450)= 0.1125 Cu mtr(Per Pole)

Provide necessary civil material for construction of Earthing chamber, excavation & installation of incuding earthingpipe dia up to 100mm dia for length of 3Mtr.Scope also includes necessary nutbolt, 25 Kg Bentonide Power , connection & welding with incoming earth Flat(GI). The work to be executed as per TPCODL drawing & design

11 KV Pin Points With WPB 55 sq.mm AAA conductor

Guarding for road crossing - 30 Mtr (Ref.: - SLD-1) for 11kV line. Guarding Channel(GI) 75x40x4.8 mm, 7.14 KG/Mtr., each Channel(GI) length 3.5 mtr., 4 no's Channel(GI) required = (4x7.14x3.5) ( For Double Pole)

No-6 GI wire (0.192 kg/mtr.) for Main String

No-8 GI wire (0.131 kg/mtr.) for lacing

Eye Bolt (236mm, 16mm dia, 1.577kg/mtr.)

Gi Pipe Earthing 40mm. 3 Mtr. Long

50x6mm Flat(GI) for earthing, 2.36kg/mtr., (10.7 mtr For raising)= 10.7x2.36

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Shifting of approximately 0.19 km of existing 1.1 kV OH LT line, followed by construction of approximately 0.21 kM of new 1.1kV OH LT line with 4C×50 mm² (P)+1C×50 mm²(M)+1CX16 mm²(Street Light) (Ref.: - SLD-1) 9 Mtr. long 300 Kg. PSC Pole

WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.)- for LT Road crossing (Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)

LT Stay set Complete

7/12 SWG GI stay wire, Grade -2

LT stay Clamp ( 1.40Kg/pair)

LT Stay insulator

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

Suspension Clamp with EYE hook for ABC

4C×50 mm² (P)+1C×50 mm²(M)+1CX16 mm²(Street Light) (LT AB Cable)

4 WAY SERVICE Distb. Box with kit kat fuse and Aluminium bus bar.

Insulated piercing connector.Type-A-main 50 to 150 sq.mm & Tap-50 to 150 sq.mm

GI Pipe Earthing (each 5th pole to earth)

Coil Earthing

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

Danger plate (LT)

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

GI Nut , Bolt & Washer of different sizes (0.5 Kg/ Pole)

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Fixing of LT Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material (Excavation of earth will be done of size 500X500X1500 mm.)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1800mm) = 0.45Cu.mtr(Per Pole) for WPB pole

Couping ratio 1:1.5:3(M-20 Grade) with dimension (500X500X450)= 0.1125 Cu mtr(Per Pole) for WPB pole

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Shifting of approximately 0.03 kM of existing 1.1kV OH LT line, followed by construction of approximately 0.03 of new 1.1kV OH LT 1Ph.2W line with 2X35 + 1X25 mm² ABC (Ref.: - SLD-1) LT Stay set Complete

7/12 SWG GI stay wire, Grade -2

LT stay Clamp ( 1.40Kg/pair)

LT Stay insulator

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

2X35 + 1X25 (LT AB Cable)

Insulated piercing connector.Type-B-main 25 to 150 sq.mm & Tap-6 to 35 sq.mm

Fixing of LT Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material (Excavation of earth will be done of size 500X500X1500 mm.)

Guarding for 3 Nos. road crossing - 30 Mtr. (Ref.: - SLD-4) for LT line Guarding Channel(GI) 75x40x4.8 mm, 7.14 KG/Mtr., each Channel(GI) length 2.2 mtr., 4 no's Channel(GI) required =( 4x7.14x2.2) ( For Single Pole)

No-6 GI wire (0.192 kg/mtr.) for Main String

No-8 GI wire (0.131 kg/mtr.) for lacing

Eye Bolt (236mm, 16mm dia, 1.577kg/mtr.)

Gi Pipe Earthing 40mm. 3 Mtr. Long

50x6mm Flat(GI) for earthing, 2.36kg/mtr., (10.7 mtr For raising)= 10.7x2.36

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Gopinathapur Uparasahi (SLD-2) Construction of 100 KVA 11/0.4KV DP mounted S/s (without transformer) - 1no & Only Plinth 1no for another 100KVA Transformer (without transformer) (Ref.: - SLD-2) (Cost of DTR not included in the estimate. The Dismantalled DTR will be reused) WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.)-DP (Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)

9 Mtr. long 300 Kg. PSC Pole

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

LT Cable raising Channel(GI) 75x40x4.8 mm GI Channel(GI) (1000 mm long)(7.14Kg./Mtr., 3 No's.) (Each 3x1.000x7.14= 21.42 Kg)

Top Channel(GI) GI 100 X 50 X 6 MM (3000 mm long) (9.56Kg./Mtr, 2 No's.) (Each 2x3.000x9.56= 57.36 Kg)

Fish Plate(GI) 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280)

AB Switch Mounting Channel(GI) 75x40x4.8 mm GI Channel(GI) (3000 mm long)(7.14Kg./Mtr., 2 No's.) (Each 2x3.000x7.14= 42.84 Kg)

AB Switch Side Support Channel(GI) 100X50X6mm,9.56 KG/Mtr., each Channel(GI) length 0.35 mtr., 2 no's Channel(GI) required =( 9.56x2x0.35)

Channel(GI) Support for down Pipe 75X40X 4.8mm., 7.14KG/Mtr., each Channel(GI) length 0.8 Mtr., 1 no's Channel(GI) required =( 7.14x0.8x1)

HG/ DO Fuse Mounting Channel(GI) 75x40x4.8 mm GI Channel(GI) (3000 mm long)(7.14Kg./Mtr., 2 No's.) (Each 2x3.000x7.14= 42.84 Kg)

Cantilever Support Channel(GI) 75x40x4.8 mm GI Channel(GI) (810 mm long,2 No's.) (7.14Kg./Mtr., 2 No's.) (Each 2x0.810x7.14= 11.57 Kg)

Cantilever Support Angle(GI) 50 X 50 X 6MM GI (1282 mm long) (4.5Kg./Mtr, 2 No's.) (Each 2x1.282x4.5= 11.54Kg)

Transformer Base GI Channel(GI) 100 X 50 X 6 MM (3000 mm long) (9.56Kg./Mtr, 2 No's.) (Each 2x3.000x9.56= 57.36 Kg)

Transformer Base Support GI Channel(GI) 100 X 50 X 6 MM (515 mm long) (9.56Kg./Mtr, 2 No's) (Each 2x0.515x9.56= 9.85Kg)

Transformer Belting Angle(GI) 50 X 50 X 6MM GI (3000 mm long)(4.5Kg./Mtr, 2 No's) (Each 2x3.0x4.5 Kg)

Transformer Belting Support Angle(GI) 50 X 50 X 6MM GI (580 mm long)(4.5Kg./Mtr,2 No's) (Each 2x0.580x4.5= Kg)

LTDB Mounting Angle(GI) 50 X 50 X 6MM GI (1000 mm long)(4.5Kg./Mtr, 2 No's) (Each 2x1x4.5 Kg)

50x6mm Flat(GI) for earthing, 2.36kg/mtr., (2.5x7 mtr. For mesh formation, 12 Mtr. For LA and 2.5 mtr. For raising, 11 mtr for AB switch, 2.8 mtr for HG Fuse, 5x2 mtr. for DTR Nutral, (1.3+4.5) mtr. For DTR Body, 0.500 mtr for LTDB & AB Switch operating handle, 3 mtr. for Fencing) ( Each 65.6x 2.36= 154.81 Kg)

LT Distribution Box with MCCB, Aluminium Busbar of 2 Bay with kit kat fuse for 100 KVA S/S

55 SQ.MM. AAAC XLPE Covered Conductor

4 Cx 150 mm2 LT XLPE Cable(Armoured) - FOR 100 KVA Trf.

1.1kV, 4Core, 150 sqmm, XLPE insulation armoured -Aluminium UG cable from LTDB to Pole

AB Switch(11KV,200A.3pole,50Hz)

H.G.Fuse( 11KV.200A.3Pole)

WEDGE CONNECTOR FOR 55 SQMM.CONDUCTOR

POLYCARBONATE BIRD GUARD

Disc insulator (B&S)70 KN polymer

H W fitting (B&S)70KN(3bolted)

Lightning Arrester(12KV,10KA) Station Class 2

11KV pin insulator polymer

HT stay set complete

HT stay Clamp (1.9Kg/pair)

HT stay insulator TYPE-C

7/10 SWG GI stay wire, Grade -2 (15Kg./ Set)

40 mm Nominal bore GI pipe (medium gauge) earthing device with 3 mtr .Long

GI Nuts & Bolts of Assorted size (25 Kg/ DSS DP)

GI Barbed wire/Anticlimbing device (3Kg /Pole)

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 8 no's = (8x0.59x0.510)

Danger plate 11kv

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 2 no's = (2x0.59x0.510)

Name plate

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Black Colour Paint(GIS Numbering & Zebra Stripping) for numbering

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1800mm) = 0.450Cu.mtr(Per Pole) (For WPB Pole)

Couping ratio 1:1.5:3(M-20 Grade) (500mmX500mmX450mm) = 0.113Cu.mtr(Per Pole)

PCC ratio 1:3:6(M-10 Grade) For DSS Area (5X3X0.1)= 1.5 Cu. mtr.

Fixing of stay set with 0.5Cum cement concrete foundation 1:3:6(M-10 Grade) size ( 900mmx600mmx900mm) using 40mm BHG metal with all labor and material except stay set , stay wire , stay insulator .

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI)around pipe .

DTR Plinth

Laying of 4 Cx 150 mm2 LT XLPE Cable

SITC and Erection of GI Fencing with Gate

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole) (For PSC Pole)

Supply of AL Lugs suitable for 150 sq mm cable/conductor, Crimping with cable and Fixing/connecting include supply and erection of PVC Tape as per voltage requirement.

Supply and erection of double Compression Flameproof Type Glanding for armored Cable 3.5/4C 120-185sqmm including making hole in Base plate and dressing of cable along with vermin proofing properly .Supply to be done as per TPCODL Spec and approved make dowells.

Shifting of approximately 0.02 circuit‑km of existing 11 kV overhead line with 55 mm² AAAC, followed by construction of approximately 0.02 circuit‑km of new 11 kV overhead road crossing line with 55 mm² AAAC (Ref.: - SLD-2) 11 KV Pin Points With WPB WPB (GI) Pole 160x152 (13Mtr. Long, 30.44KG/Mtr.) - for 11KV road crossing (Total Pole Weight with Base Plate & Stiffner=395.72 KG+10.74 KG= 406.46 KG)

11 KV V cross Arm(GI) (10.2 K.g. each )

Top bracket 100x50X6 mm GI Channel(GI) (2kg each)

Danger Plate, 1 no's. for each pole

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

11 KV pin insulator polymer, 3 Nos. required for each support

Earthing of Support ( Coil Type )

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

GI Nut , Bolt & Washer of different sizes (1.45 Kg/ Pin Point)

55 sq.mm AAA conductor

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

POLYCARBONATE BIRD GUARD

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX2200mm) = 0.55Cu.mtr(Per Pole)

Couping ratio 1:1.5:3(M-20 Grade) with dimension (500X500X450)= 0.1125 Cu mtr(Per Pole)

Guarding for road crossing - 30 Mtr. (Ref.: - SLD-2) for LT & 11KV line Guarding Channel(GI) 75x40x4.8 mm, 7.14 KG/Mtr., each Channel(GI) length 2.2 mtr., 4 no's Channel(GI) required =( 4x7.14x2.2) ( For Single Pole)

No-6 GI wire (0.192 kg/mtr.) for Main String

No-8 GI wire (0.131 kg/mtr.) for lacing

Eye Bolt (236mm, 16mm dia, 1.577kg/mtr.)

Gi Pipe Earthing 40mm. 3 Mtr. Long

50x6mm Flat(GI) for earthing, 2.36kg/mtr., (10.7 mtr For raising)= 10.7x2.36

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Shifting of approximately 0.35 km of existing 1.1 kV OH LT line with 3X50+1X35 sqmm ABC, followed by construction of approximately 0.42 kM of new 1.1kV OH LT line with 4C×50 mm² (P)+1C×50 mm²(M)+1CX16 mm²(Street Light) (Ref.: - SLD-2) 9 Mtr. long 300 Kg. PSC Pole

WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.)-for LT road crossing and one for strut stay (Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)

LT Stay set Complete

7/12 SWG GI stay wire, Grade -2

LT stay Clamp ( 1.40Kg/pair)

LT Stay insulator

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

Suspension Clamp with EYE hook for ABC

4C×50 mm² (P)+1C×50 mm²(M)+1CX16 mm²(Street Light) (LT AB Cable)

4 WAY SERVICE Distb. Box with kit kat fuse and Aluminium bus bar.

Insulated piercing connector.Type-A-main 50 to 150 sq.mm & Tap-50 to 150 sq.mm

GI Pipe Earthing (each 5th pole to earth)

Coil Earthing

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

Danger plate (LT)

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

GI Nut , Bolt & Washer of different sizes (0.5 Kg/ Pole)

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Fixing of LT Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material (Excavation of earth will be done of size 500X500X1500 mm.)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1800mm) = 0.45Cu.mtr(Per Pole) for WPB pole

Couping ratio 1:1.5:3(M-20 Grade) with dimension (500X500X450)= 0.1125 Cu mtr(Per Pole) for WPB pole

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Gopinathapur Gramya Bank (SLD-3) :- Shifting of approximately 0.06 km of existing 1.1 kV OH LT line, followed by construction of approximately 0.06 kM of new 1.1kV OH LT line with 4C×35 mm² (P)+1C×35 mm²(M)+1CX16 mm²(Street Light) (Ref.: - SLD-3) 9 Mtr. long 300 Kg. PSC Pole

LT Stay set Complete

7/12 SWG GI stay wire, Grade -2

LT stay Clamp ( 1.40Kg/pair)

LT Stay insulator

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

Crimping type Midspan Compression Joint for 55 sq.mm AAA conductor Black Paint(GIS Numbering & Zebra Stripping)

Insulated piercing connector.Type-B-main 25 to 150 sq.mm & Tap-6 to 35 sq.mm

Coil Earthing

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

Danger plate (LT)

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

GI Nut , Bolt & Washer of different sizes (0.5 Kg/ Pole)

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Fixing of LT Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material (Excavation of earth will be done of size 500X500X1500 mm.)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole)

Balisahi road (SLD-4):- Shifting of approximately 0.09 km of existing 1.1 kV OH LT line, followed by construction of approximately 0.1kM of new 1.1kV OH LT line with 4C×35 mm² (P)+1C×35 mm²(M)+1CX16 mm²(Street Light) (Ref.: - SLD-4) 9 Mtr. long 300 Kg. PSC Pole

WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.)- for LT road crossing (Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)

LT Stay set Complete

7/12 SWG GI stay wire, Grade -2

LT stay Clamp ( 1.40Kg/pair)

LT Stay insulator

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

Suspension Clamp with EYE hook for ABC

4C×35 mm² (P)+1C×35 mm²(M)+1CX16 mm²(Street Light) (LT AB Cable)

4 WAY SERVICE Distb. Box with kit kat fuse and Aluminium bus bar.

Insulated piercing connector.Type-B-main 25 to 150 sq.mm & Tap-6 to 35 sq.mm

Coil Earthing

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

Danger plate (LT)

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

GI Nut , Bolt & Washer of different sizes (0.5 Kg/ Pole)

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Fixing of LT Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material (Excavation of earth will be done of size 500X500X1500 mm.)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1800mm) = 0.45Cu.mtr(Per Pole) for WPB pole

Couping ratio 1:1.5:3(M-20 Grade) with dimension (500X500X450)= 0.1125 Cu mtr(Per Pole) for WPB pole

Shifting of approximately 0.05 kM of existing 1.1kV OH LT line, followed by construction of approximately 0.05 of new 1.1kV OH LT 1Ph.2W line with 2X35 + 1X25 mm² ABC (Ref.: - SLD-4) 9 Mtr

LT Stay set Complete

7/12 SWG GI stay wire, Grade -2

LT stay Clamp ( 1.40Kg/pair)

LT Stay insulator

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

Suspension Clamp with EYE hook for ABC 4C×35 mm² (P)+1C×35 mm²(M)+1CX16 mm²(Street Light) (LT AB Cable)

Insulated piercing connector.Type-B-main 25 to 150 sq.mm & Tap-6 to 35 sq.mm

Coil Earthing

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

Danger plate (LT)

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

GI Nut , Bolt & Washer of different sizes (0.5 Kg/ Pole)

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Fixing of LT Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material (Excavation of earth will be done of size 500X500X1500 mm.)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole)

. long 300 Kg. PSC Pole

No-6 GI wire (0.192 kg/mtr.) for Main String

No-8 GI wire (0.131 kg/mtr.) for lacing

Eye Bolt (236mm, 16mm dia, 1.577kg/mtr.)

Gi Pipe Earthing 40mm. 3 Mtr. Long

50x6mm Flat(GI) for earthing, 2.36kg/mtr., (10.7 mtr For raising)= 10.7x2.36

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Guarding for LT road crossing - 30 Mtr. (Ref.: - SLD-4) Guarding Channel(GI) 75x40x4.8 mm, 7.14 KG/Mtr., each Channel(GI) length 2.2 mtr., 4 no's Channel(GI) required =( 4x7.14x2.2) ( For Single Pole)

9 Mtr. long 300 Kg. PSC Pole

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

LT Cable raising Channel(GI) 75x40x4.8 mm GI Channel(GI) (1000 mm long)(7.14Kg./Mtr., 3 No's.) (Each 3x1.000x7.14= 21.42 Kg)

Top Channel(GI) GI 100 X 50 X 6 MM (3000 mm long) (9.56Kg./Mtr, 2 No's.) (Each 2x3.000x9.56= 57.36 Kg)

Fish Plate(GI) 50x6 mm., 2.36 kg/Mtr., each 0.280 mtr. length, 6 no's required = (6x2.36x0.280)

AB Switch Mounting Channel(GI) 75x40x4.8 mm GI Channel(GI) (3000 mm long)(7.14Kg./Mtr., 2 No's.) (Each 2x3.000x7.14= 42.84 Kg)

AB Switch Side Support Channel(GI) 100X50X6mm,9.56 KG/Mtr., each Channel(GI) length 0.35 mtr., 2 no's Channel(GI) required =( 9.56x2x0.35)

Channel(GI) Support for down Pipe 75X40X 4.8mm., 7.14KG/Mtr., each Channel(GI) length 0.8 Mtr., 1 no's Channel(GI) required =( 7.14x0.8x1)

HG/ DO Fuse Mounting Channel(GI) 75x40x4.8 mm GI Channel(GI) (3000 mm long)(7.14Kg./Mtr., 2 No's.) (Each 2x3.000x7.14= 42.84 Kg)

Cantilever Support Channel(GI) 75x40x4.8 mm GI Channel(GI) (810 mm long,2 No's.) (7.14Kg./Mtr., 2 No's.) (Each 2x0.810x7.14= 11.57 Kg)

Cantilever Support Angle(GI) 50 X 50 X 6MM GI (1282 mm long) (4.5Kg./Mtr, 2 No's.) (Each 2x1.282x4.5= 11.54Kg)

Transformer Base GI Channel(GI) 100 X 50 X 6 MM (3000 mm long) (9.56Kg./Mtr, 2 No's.) (Each 2x3.000x9.56= 57.36 Kg)

Transformer Base Support GI Channel(GI) 100 X 50 X 6 MM (515 mm long) (9.56Kg./Mtr, 2 No's) (Each 2x0.515x9.56= 9.85Kg)

Transformer Belting Angle(GI) 50 X 50 X 6MM GI (3000 mm long)(4.5Kg./Mtr, 2 No's) (Each 2x3.0x4.5 Kg)

Transformer Belting Support Angle(GI) 50 X 50 X 6MM GI (580 mm long)(4.5Kg./Mtr,2 No's) (Each 2x0.580x4.5= Kg)

LTDB Mounting Angle(GI) 50 X 50 X 6MM GI (1000 mm long)(4.5Kg./Mtr, 2 No's) (Each 2x1x4.5 Kg)

50x6mm Flat(GI) for earthing, 2.36kg/mtr., (2.5x7 mtr. For mesh formation, 12 Mtr. For LA and 2.5 mtr. For raising, 11 mtr for AB switch, 2.8 mtr for HG Fuse, 5x2 mtr. for DTR Nutral, (1.3+4.5) mtr. For DTR Body, 0.500 mtr for LTDB & AB Switch operating handle, 3 mtr. for Fencing) ( Each 65.6x 2.36= 154.81 Kg)

LT Distribution Box with MCCB, Aluminium Busbar of 2 Bay with kit kat fuse for 100 KVA S/S

55 SQ.MM. AAAC XLPE Covered Conductor

4 Cx 150 mm2 LT XLPE Cable(Armoured) - FOR 100 KVA Trf.

1.1kV, 4Core, 150 sqmm, XLPE insulation armoured -Aluminium UG cable from LTDB to Pole

AB Switch(11KV,200A.3pole,50Hz)

H.G.Fuse( 11KV.200A.3Pole)

WEDGE CONNECTOR FOR 55 SQMM.CONDUCTOR

POLYCARBONATE BIRD GUARD

Disc insulator (B&S)70 KN polymer

H W fitting (B&S)70KN(3bolted)

Lightning Arrester(12KV,10KA) Station Class 2

11KV pin insulator polymer

HT stay set complete

HT stay Clamp (1.9Kg/pair)

HT stay insulator TYPE-C

7/10 SWG GI stay wire, Grade -2 (15Kg./ Set)

40 mm Nominal bore GI pipe (medium gauge) earthing device with 3 mtr .Long

GI Nuts & Bolts of Assorted size (25 Kg/ DSS DP)

GI Barbed wire/Anticlimbing device (3Kg /Pole)

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 8 no's = (8x0.59x0.510)

Danger plate 11kv

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 2 no's = (2x0.59x0.510)

Name plate

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Black Colour Paint(GIS Numbering & Zebra Stripping) for numbering

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1800mm) = 0.450Cu.mtr(Per Pole) (For WPB Pole)

Couping ratio 1:1.5:3(M-20 Grade) (500mmX500mmX450mm) = 0.113Cu.mtr(Per Pole)

PCC ratio 1:3:6(M-10 Grade) For DSS Area (5X3X0.1)= 1.5 Cu. mtr.

Fixing of stay set with 0.5Cum cement concrete foundation 1:3:6(M-10 Grade) size ( 900mmx600mmx900mm) using 40mm BHG metal with all labor and material except stay set , stay wire , stay insulator .

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

DTR Plinth

Laying of 4 Cx 150 mm2 LT XLPE Cable

SITC and Erection of GI Fencing with Gate

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole) (For PSC Pole)

Supply of AL Lugs suitable for 150 sq mm cable/conductor, Crimping with cable and Fixing/connecting include supply and erection of PVC Tape as per voltage requirement.

Supply and erection of double Compression Flameproof Type Glanding for armored Cable 3.5/4C 120-185sqmm including making hole in Base plate and dressing of cable along with vermin proofing properly .Supply to be done as per TPCODL Spec and approved make dowells.

Gopinathapur Hata (SLD-5) :-Construction of 100 KVA 11/0.4KV DP mounted S/s (without transformer) - 1no & Only Plinth 1no for another 100KVA Transformer (without transformer) (Ref.: - SLD-5) (Cost of DTR not included in the estimate. The Dismantalled DTR will be reused) WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.)-DP (Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)

11 KV V cross Arm(GI) (10.2 K.g. each )

Top bracket 100x50X6 mm GI Channel(GI) (2kg each)

Danger Plate, 1 no's. for each pole

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

11 KV pin insulator polymer, 3 Nos. required for each support

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

GI Nut , Bolt & Washer of different sizes (1.45 Kg/ Pin Point)

55 sq.mm AAA conductor

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

POLYCARBONATE BIRD GUARD

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1800mm) = 0.45Cu.mtr(Per Pole)

Couping ratio 1:1.5:3(M-20 Grade) with dimension (500X500X450)= 0.1125 Cu mtr(Per Pole)

Shifting of approximately 0.05 circuit‑km of existing 11 kV overhead line with 55 mm² AAA conductor, followed by construction of approximately 0.06 circuit‑km of new 11 kV overhead road crossing line with 55 mm² AAAC (Ref.: - SLD-5) 11 KV Pin Points With WPB WPB (GI) Pole 160x152 (13Mtr. Long, 30.44KG/Mtr.) (Total Pole Weight with Base Plate & Stiffner=395.72 KG+10.74 KG= 406.46 KG)

No-6 GI wire (0.192 kg/mtr.) for Main String

No-8 GI wire (0.131 kg/mtr.) for lacing

Eye Bolt (236mm, 16mm dia, 1.577kg/mtr.)

Gi Pipe Earthing 40mm. 3 Mtr. Long

50x6mm Flat(GI) for earthing, 2.36kg/mtr., (10.7 mtr For raising)= 10.7x2.36

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Guarding for road crossing - 30 Mtr. (Ref.: - SLD-5) for 11KV line & LT line. Guarding Channel(GI) 75x40x4.8 mm, 7.14 KG/Mtr., each Channel(GI) length 2.2 mtr., 4 no's Channel(GI) required =( 4x7.14x2.2) ( For Single Pole)

Shifting of approximately 0.337 km of existing 1.1 kV OH LT line, followed by construction of approximately 0.65 kM of new 1.1kV OH LT line with 4C×50 mm² (P)+1C×50 mm²(M)+1CX16 mm²(Street Light) (Ref.: - SLD-5) 9 Mtr. long 300 Kg. PSC Pole

LT Stay set Complete

7/12 SWG GI stay wire, Grade -2

LT stay Clamp ( 1.40Kg/pair)

LT Stay insulator

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

Suspension Clamp with EYE hook for ABC

4C×50 mm² (P)+1C×50 mm²(M)+1CX16 mm²(Street Light) (LT AB Cable)

Insulated piercing connector.Type-A-main 50 to 150 sq.mm & Tap-50 to 150 sq.mm

GI Pipe Earthing (each 5th pole to earth)

Coil Earthing

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

Danger plate (LT)

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

GI Nut , Bolt & Washer of different sizes (0.5 Kg/ Pole)

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Fixing of LT Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material (Excavation of earth will be done of size 500X500X1500 mm.)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1800mm) = 0.45Cu.mtr(Per Pole) for WPB pole

Couping ratio 1:1.5:3(M-20 Grade) with dimension (500X500X450)= 0.1125 Cu mtr(Per Pole) for WPB pole

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

WPB (GI) Pole 160x152 (11Mtr. Long, 30.44KG/Mtr.)-for LT road crossing (Total Pole Weight with Base Plate & Stiffner=334.84 KG+10.74 KG= 345.58 KG)

11 KV V cross Arm(GI) (10.2 K.g. each )

Top bracket 100x50X6 mm GI Channel(GI) (2kg each)

Danger Plate, 1 no's. for each pole

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

11 KV pin insulator polymer, 3 Nos. required for each support

Earthing of Support ( Coil Type )

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

GI Nut , Bolt & Washer of different sizes (1.45 Kg/ Pin Point)

55 sq.mm AAA conductor

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

POLYCARBONATE BIRD GUARD

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX2200mm) = 0.55Cu.mtr(Per Pole)

Couping ratio 1:1.5:3(M-20 Grade) with dimension (500X500X450)= 0.1125 Cu mtr(Per Pole)

Gopinathapur Bridge (SLD-6) : - Shifting of approximately 0.02 circuit‑km of existing 11 kV overhead line with 55 mm² AAA conductor, followed by construction of approximately 0.02 circuit‑km of new 11 kV overhead road crossing line with 55 mm² AAAC (Ref.: - SLD-6) 11 KV Pin Points With WPB WPB (GI) Pole 160x152 (13Mtr. Long, 30.44KG/Mtr.) (Total Pole Weight with Base Plate & Stiffner=395.72 KG+10.74 KG= 406.46 KG)

No-6 GI wire (0.192 kg/mtr.) for Main String

No-8 GI wire (0.131 kg/mtr.) for lacing

Eye Bolt (236mm, 16mm dia, 1.577kg/mtr.)

Gi Pipe Earthing 40mm. 3 Mtr. Long

50x6mm Flat(GI) for earthing, 2.36kg/mtr., (10.7 mtr For raising)= 10.7x2.36

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Guarding for road crossing - 20 Mtr. (Ref.: - SLD-6) for 11KV line. Guarding Channel(GI) 75x40x4.8 mm, 7.14 KG/Mtr., each Channel(GI) length 2.2 mtr., 4 no's Channel(GI) required =( 4x7.14x2.2) ( For Single Pole)

LT Stay set Complete

7/12 SWG GI stay wire, Grade -2

LT stay Clamp ( 1.40Kg/pair)

LT Stay insulator

Pole clamp for EYE hook for (XLPE Aerial bunched Cable)

EYE hook for XLPE Aerial bunched Cable

Dead End Clamp suitable for messenger XLPE Aerial bunched Cable

Suspension Clamp with EYE hook for ABC

2X35 + 1X25 (LT AB Cable)

4 WAY SERVICE Distb. Box with kit kat fuse and Aluminium bus bar.

Insulated piercing connector.Type-B-main 25 to 150 sq.mm & Tap-6 to 35 sq.mm

GI Pipe Earthing (each 5th pole to earth)

Coil Earthing

No-8 GI wire (Dia 4.6mm) 0.131 KG/ Mtr.- 2 Mtr. For connecting pole with Coil earthing

Danger plate (LT)

Back Clamp for danger Plate 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 1 no's = (1x0.59x0.510)

GI barbed wire anticlimbing device 3 Kg. Per support

Back Clamp for anticlimbing device 25X3 mm. Flat(GI), 0.59Kg/Mtr. Flat(GI) of 0.510mtr length 4 no's = (4x0.59x0.510)

GI Nut , Bolt & Washer of different sizes (0.5 Kg/ Pole)

Black Paint(GIS Numbering & Zebra Stripping)

Yellow Colour Paint(GIS Numbering & Zebra Stripping) for Background

Fixing of LT Complete stay set includes 1) Turn Buckle Assembly 2) Stay Rod & Stay plate 3) Stay Insulator 4) Stay Wire. 5)Stay clamps with Nuts & bolts, including excvation, supply of 0.5Cum cement concrete foundation 1:2:4 size (500mmx500mmx800mm) using 20mm BHG metal with all labour and material (Excavation of earth will be done of size 500X500X1500 mm.)

Concreting ratio 1:1.5:3(M-20 Grade) (500mmX500mmX1500mm) = 0.375Cu.mtr(Per Pole)

Construction Earthing chamber including installation of earthing pipe.Making earthing chamber including excavation , soil treatment with bentonide powder , calculation of earth resistance, including Installation of 3Mtr GI Pipe 40mm/50mm including welding of Flat(GI) around pipe .

Shifting of approximately 0.4 kM of existing 1.1kV OH LT line, followed by construction of approximately 0.4 of new 1.1kV OH LT 1Ph.2W line with 2X35 + 1X25 mm² ABC (Ref.: - SLD-6) 9 Mtr. long 300 Kg. PSC Pole

Dismantling Materials against shifting Dismantling of 09/11 Mtr. Joist/WPB Pole- 116X100mm (Serviceable Pole) after digging the pit and taking out the pole, transportation and stacking the pole at a proper place in safe position within 10km /site store and refilling the pit with loose earth and ramming including removal and disposal of malba at proper location as per instruction of EIC.

Dismantling of 9/8 Mtr. PCC/Joist Pole (Serviceable Pole) after digging the pit and taking out the pole, transportation and stacking the pole at a proper place in safe position within 10km /site store and refilling the pit with loose earth and ramming including removal and disposal of malba at proper location as per instruction of EIC.

Dismantling of ACSR/AAAC 34/ 55mm2 from overhead line, recoiling, loading, transportation, unloading and staking at a proper place in safe position/ site store

Dismantling of varous size of LT AB Cable from over head line, recoiling, loading,transportation, unloading and staking at a proper place in safe position/BA site store.