SPL REPAIRS TO 6 X TOILET BLOCKS OF BLDG NO P-439 AT MIRC UNDER GE (S) AHMEDNAGAR

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floor & pavings n.exc. 15cm thick below or above ground level all as specified and as directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Demolition of PCC solid block masonry, built in cement or lime mortar including all quoins, arches, pillars,etc all as specified and as directed.

Demolition of brick/ stone masonry, built in cement or lime mortar including all quoins, arches, pillars,etc all as specified and as directed.

Dismantling of stone slab of any description in floor, laid, bedded & pointed in any mortar, all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.5 sq. m each all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exceeding 1.5 sqm but not exceeding 4 sqm each all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

Hacking out of old broken glass (any thickness ,size quality or description) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for re- fixing all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for re- fixing all as specified and as directed.

Taking up or down 25 mm bore steel tubing and connections, including cleaning for re- fixing all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 150mm all as specified and as directed.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar, internal dia of pipe 200mm all as specified and as directed.

Excavation over areas n exc 1.50m in deep and getting out in soft/loose soil all as specified and as directed.

Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth; for foundations, etc. or for manholes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out in any type of soil all as specified and as directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25cm thick with soils all as specified and as directed.

Removing excavated soil to distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed.

M&L for moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering all as specified and as directed.

M&L for hardcore of guage n exc 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified and as directed.

M&L for plain cement concrete, 1:4:8, type D-2, using 40 mm graded stone aggregates as in foundations, filling and mass concrete all as specified and as directed.

M&L for plain cement concrete 1:3:6, type C-1, using 20mm graded stone aggregates as in copings, haunchings and the like including necessary formwork, weathering, slightly rounded or chamfered angles and throating, complete all as spcified and as directed.

M&L for RCC M-25, design mix, as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs,under-reamed piles and mass concrete all as specified and as directed.

M&L for RCC M-25, design mix, as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like all as specified and as directed.

M&L for RCC M-25, design mix, as in beams, cantilevers, bressummers, lintels over 1.5m span all as specified and as directed.

M&L for precast cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in landings, cover slabs (for manholes etc) and similar small articles with plain fair faces, set in cement mortar 1:4 complete all as specified and as direced.

M&L for brick work with fly ash bricks, old size, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and as directed.

M&L for brick work with fly ash bricks, old size, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4 complete all as specified and as directed.

M&L for precast cement concrete block masonry with solid block of PCC (1:5:8) , exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels over 1.5m clear span, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished flat surfaces of concrete all as specified and as directed.

S&F 35 mm thick, second class hard wood glazed and skeleton shutters, factory made, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamferesd or rounded, fitted with cut and mitred beads for securing glass etc., for windows and ventilators, etc are provided with stiles and rails as specified in SSR Pt I Section 8, clause 8.24 (a) complete all as specified and as directed.

S&F 35mm thick, second class hard wood, plain framed, factory made, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.

S&F factory made solid PVC door shutter, 30mm thick (stiles), consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, Panellng of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined toghter with solvent cement and fixed to frame complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, and fixed in opening all as specified and as directed.

S&F 100 mm size butt hinges, medium weight, cold rolled mild steel, and fixed all as specified and as directed.

S&F 150mm long aluminium barrel tower bolt of extruded section all as specified and as directed.

S&F 150 mm size aluminium handle, anodised, fabricated type all as specified and as directed.

S&F 300 mm long aluminum alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of steel, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy complete all as specified and as directed.

S&F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18 mm etc complete all as specified and as directed.

S&F pressed steel doors frames of size 125 mm x 60 mm x 1.25mm thick, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified and as directed.

S&F mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

All as per serial item No 43 but 6mm to 8mm dia.

S&F factory made, mild steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F mild steel windows/ventilators, fixed type with glazing bars complete all as specifed and as directed

M&L for mild steel framed work such as grills grating etc with end of bars shoulderd and/or riveted .welded or forged into spikes.framedguard bars iron doors.ladders framed balusters , walk ways. railings, frame work of water tanks and similar work conforming to Fe 290 Gde E-165 all as specified and as directed.

M&L for special treatment to sunken portion with 10 mm thick rendering in cement mortar 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick in cement mortar 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade, PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) filling, floor area of WC/bath upto 1.5 Sqm etc. complete all as specified and directed. Note :- The rates include for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm complete all as specified and directed

M&L for special treatment to sunken portion with 10 mm thick rendering in cement mortar 1:4 with WPC liquid complast 421 and applying one coat each of Nittoproof 100 and Nittoproof 120 on plaster surface. Rendering again 10 mm thick in cement mortar 1:4 mixed with complast 421 in sunken portion of WC and CI pipe joints shall be filled / jointed with mixture of cement, fine sand and Nittoproof 130 and provide hole in the wall and fix 600 mm long 20 mm dia GI spouts light grade, PCC 1:3:6, type C1 (using 20 mm graded stone aggregates) filling, floor area of WC/bath exc 1.5 Sqm but not exc 3sqm each etc. complete all as specified and directed. Note :- The rates include for drilling of the hole RCC @ 1.00 m centre to centre, to a depth to a length of 30 mm and fixing of PVC pipes of dia 15/20 mm laid dry and grouting with cement slurry mixed with can bax 100 chemical with pressure grouting with minimm 3 Kg/Sqm complete all as specified and directed

M&L for 18-20mm thick pre-polished granite stone slab of approved shade and colour Jet Black / Telephone Black as in table top, top of WHB, kitchen slab/platform, steps, gate pillars, cills etc or on vertical surfaces including vertical projection, including full round moulding the edge, laid over and including 10mm thick backing coat in cement mortar 1:4, jointing , pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite and rubbing polish to achieve mirror finish complete all as specified and as directed.

M&L for machine cut cudappah stone slab flooring, 20-25 mm thick laid over and including 20 mm thick bedding layer of cement mortar 1:6 jointed with grey cement slurry mixed with pigments to match the shade of slab including cutting, rubbing and mirror polishing including removing dust complete all as specified and as directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15mm thick screed bed in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

M&L for coloured glazed ceramic tiles 7 mm thick (plain or printed), area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, as on vertical surfaces like dado, skirting etc, laid over and including 10 mm thck backing coat in cement mortar 1:4, jointed in neat cement slurry and pointed in coloured cement complete all as specified and directed.

M&L for water proofing treatment to RCC roof slab, including parapet, comprising with the following treatment/specification from bottom to top:- (i) Screed bed or bedding layer of 10 mm thick cement mortar 1:4 with mixing of WPC @ 3% by weight of cement or as per manufacturers instructions and surface finished even and smooth without using extra cement after applying a coat of cement slurry @ 3 kg/sqm for laying APP membrane. (ii) Cleaning of plastered roof surface and applying one coat of cold bituminous primer @ 0.30 ltr /Sqm conforming to IS:3384-1986. (iii) APP based polymeric membrane 3mm thick (minimum), weighing 3.5 Kg/sqm reinforced with polyester non woven fabric (weighing not less than 150 gms/Sqm) shall be applied over bituminous primer as specified above by torch application. The overlaps shall be minimum 100mm on the transverse direction and 75mm on longitudinal direction. (iv) Applying two coat of aluminium paint over the APP modified membrane @ 0.11Kg/sqm. Note: Water proofing compount will be measured & paid seperatly.

Supply only water proofing compound, ISI mark as aproved by GE all as specified and as directed.

M&L for 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick work or concrete surfaces, finished even and smooth with sagol finish complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces, finished surfaces even and fair all as specified and as directed.

M&L for rendering 5 mm thick in cement mortar 1:4 on fair faces of concrete surfaces as in ceiling, finished surfaces even and smooth with sagol finish complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash all as specified and as directed.

M&L for preparation of new plastered surfaces of ceilings and applying three coats of white wash all as specified and as directed.

M&L for preparation of old plastered or un-plastered surfaces of walls and applying two coats of white wash all as specified and as directed.

M&L for preparation of old plastered or un-plastered surfaces of ceilings and applying two coats of white wash all as specified and as directed.

M&L for preparation of new plastered or un-plastered surfaces of walls and applying two coats of cement base paint over a coat of primer all as specified and as directed

M&L for complete removal of existing treatment from walls and applying two coats of cement base paint over a coat of primer all as specified and as directed

M&L for preparation of old plastered or un-plastered surfaces of walls and applying two coats of cement base paint all as specified and as directed

M&L for 3 mm thick plain sheet glass and glazing with oil putty in square n exc 0.5 Sqm in each pane all as specified and as directed

M&L for 3 mm thick figured glass pin head type and glazing with oil putty in square n exc 0.5 Sqm in each pane all as specified and as directed

M&L for preparing new wooden surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of pink primer all as specified and as directed

M&L for preparing new steel surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed

Disconnecting existing PVC water tank, exc 2000 Ltr but n exc 5000 Ltr capacity, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, reconnecting and refixing in position including cleaning (repairing measured separately) complete all as specified and as directed.

S&F in repairs, rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) of 5000 litres capacity, tripple layer, hoisted and fixed in position including 25mm bore brass ball valve, high pressure with polythene float and fly nut complete and fixed complete all as specified and as directed.

S&F in repairs, vitreous china bowl urinal, white, flat back of size 465mm x 355mm x 265mm (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) including urinal spreader of PTMT (minimum weight 60 gms), any colour for fixing with 15 mm dia pipe, 15mm dia 450mm long PVC connection pipe with PTMT nuts. all as specified and as directed.

S&F in repairs, vitreous china wash hand basin, white, flat back, size 450 mm x 300 mm, including brackets, pillar tap 15 mm bore chromium plated, fancy type, cast copper alloy with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks, 32 mm dia waste coupling brass chromium plated with long screwed shanks and fly nuts, 32mm size brass chromium plated bottle trap inlet and outlet screwed for pipe or connections including necessary packing union and cap, 32/40 mm bore PVC flexible outlet pipe, 15mm dia 600mm long PVC connection pipe with PTMT nuts complete all as specified and as directed.

S&F in repairs, vitreous China, white, squatting pan, Orissa pattern of size 580 mm x 440 mm width with integral foot rest, P or S trap, set in cement concrete including flush pipe and connecting to trap / flushing cistren and making good to floor complete all as specified and as directed.

S&F in repairs, vitreous china wash down water closet (Pedestal pattern) including connection to drain (or outgoing pipe) and flushing pipe, anti syphonage pipe, trap set and including white or black seat cover for pedestal pan with mild steel chromium plated aluminium hinging device, fixed to pan with suitable screws etc complete all as specified and as directed.

S&F in repairs, 10 litres capacity, PVC valveless syphonic action type, flushing cistern, low level, white or coloured, with inlet, ball valve, float and handle including brackets etc complete all as specified and as directed.

S&F 15 mm bore GI tubing, medium grade with and including all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 20 mm bore GI tubing, medium grade with and including all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F 25 mm bore GI tubing, medium grade with and including all fitting and fixed complete on walls and ceilings or laid in floors etc complete all as specified and as directed.

S&F in repairs, 25mm bore gun metal or bronze globe valve, ISI marked, screwed both ends suitable for GI tubing with side way operating GI lever handle complete all as specified and as directed

S&F in repairs, bib taps, 15mm bore, cast copper alloy chromium plated with capstan heads, fancy type, screwed down for iron pipe or for brass ferrule and fixed all as specified and as directed.

S&F in repairs, 15mm bore stop cock, cast copper alloy, fancy type, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for union and fix complete all as specified and as directed.

S&F in repairs, tubular towel rail, brass chromium plated, 20 mm dia `D' type, 60 cm long between flanges all as specified and as directed.

S&F in repairs, brass chromium plated health faucet (Hand shower) with 1200mm long guarded flexible tube screwed one end, suitable for 15mm bore connection, wall mounted with and including hook for hanging arrangement all as specified and as directed.

S&F in repairs, brass chromoum plated shower rose of size 125mm dia with or without swivel joints and fixed to steel pipe complete all as specified and as directed.

M&L for 150 mm internal dia reinforced concrete pipes with collars, class NP2, laid and jointed complete all as specified and as directed.

M&L for 200 mm internal dia reinforced concrete pipes with collars, class NP2, laid and jointed complete all as specified and as directed.

M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for bed to 150mm internal dia RCC drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

M&L for cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate for bed to 200mm internal dia RCC drain pipes including packing under and haunching against the sides of pipes after they are laid and tested all as specified and as directed.

S&F in repairs, PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement to waste pipe, including fixing in cement concrete type (1:2:4) type B1 complete all as specified and as directed.

S&F in repairs, PVC (SWR) muti floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement to waste pipe, including fixing in cement concrete type (1:2:4) type B1 complete all as specified and as directed.

S&F in repairs, PVC (SWR) gully trap of 125/110mm, with grating including jointing with solvent cement to waste pipe, including fixing in cement concrete type (1:2:4) type B1 complete all as specified and as directed.

S&F grating doom 100mm dia PTMT (minimum weight 25gms) all as specified and as directed.

S&F in repairs, 110 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to walls complete all as specified and as directed

S&F in repairs, 75 mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to walls complete all as specified and as directed

S&F in repairs, 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints and laid in trenches or in floors complete all as specified and as directed

S&F in repairs, 110 mm bore PVC (SWR) bends all as specified and as directed

S&F in repairs, 75 mm bore PVC (SWR) bends all as specified and as directed

S&F in repairs, 110 mm bore PVC (SWR) junction single (single T) equal all as specified and as directed

S&F in repairs, 75 mm bore PVC (SWR) junction single (single T) equal all as specified and as directed

S&F in repairs, 110 mm bore PVC (SWR) branch pieces junction double (double T) equal or unequal all as specified and as directed

S&F in repairs, 75 mm bore PVC (SWR) branch pieces junction double (double T) equal or unequal all as specified and as directed

Cleaning of existing SGSW/RCC pipe line of upto 150mm bore pipes between the manholes by mechanical operated machine for removing blockage, debris from pipes taking out the blocked sludge debris etc collected in the manholes from pipe, cleaning & depositing sludge / debries to execavated area, spreading necessary insectcise where sludge is deposited and covered with soil all as specified and as directed

Cleaning of existing SGSW/RCC pipe line exc 150mm bore but not exc 300mm bore pipes between the manholes by mechanical operated machine for removing blockage, debris from pipes taking out the blocked sludge debris etc collected in the manholes from pipe, cleaning & depositing sludge / debries to execavated area, spreading necessary insectcise where sludge is deposited and covered with soil all as specified and as directed

M&L for cutting into existing manhole for connecting new drains making good to pipes & rendering, cutting out existing out benching & forming branch channel 01, 1/2 round or 3/4 section in PCC 1:2:4 type B1, smooth finished for 150mm bore pipe complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fittings such as switches, bell push, holders, ceiling roses, pendants, regulators, sockets etc but excluding DBs, light fittings etc and making good disturbed surfaces of walls, floors etc. and matching with existing surface all as specified and as directed.

M&L for point wiring with two runs of 1.5 sqmm for phase and neutral, single core, multistranded copper conductor cable of 1100 Volts grade, conforming to IS-694 1990, PVC insulated and unsheathed , FRLS cable laid / fixed and including concealed in PVC rigid conduit on walls/ceiling alongwith 1.5 Sqmm copper conductor cable (multistranded) PVC insulated and unsheathed FRLS cable as earth wire connected to common earth dolly at one end and metalic bodies of luminaire/ fan at other end including PVC folding boards for mounting switches, sockets, fan Regulators, accessories etc for one light point or one fan point controlled by one, one way switch as specified and directed NOTE :- 1.Proper colour coding shall be adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black) 2. All points shall be earthed up to fixtures i.e holdrs,tube lights,all lights,ceiling lights,bulkhead lights,bldg security lights etc. 3.Unit rate include for cutting chases for conduits and sinking for boxes and making good to wall ,floors etc.

All as per serial item No. 110 but one 5 Amp, 5 pin, socket outlet point on same board with other switches including earth wire as specified.

All as per serial item No. 110 but on independent board.

All as per serial item No. 110 but with 2.5 Sqmm PVC copper conductor stranded cable FRLS type for phase,Neutral and earth for one 15 Amp 6 pin socket on independent board.

S&F switch piano, flush button, 6 Amp, single pole, one way, 230 volts, white finish, all as specified & as directed.

S&F socket outlet, flush type, 5 pin, 6 Amp, multipurpose, 230 volts, single pole, one way suitable for 3 pin/2pin, 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, flush type, 5 pin, 6 Amp, multipurpose, 230 volts, single pole, one way, suitable for 3 pin/2pin 5 Amp plug top white/ivory finish all as specified & as directed.

S&F switch socket combination, multipurpose, flush type, 2 in 1 type (6 pin ) 6/16 Amps, 230V, AC. all as specified & as directed.

S&F ceiling rose, surface PVC 50mm dia, 3 terminals including PVC mounting block white/ivory finish all as specified & as directed.

S&F in repairs, square profile LED lighting fixture with extruded polycorbonate,environmental friendly,energy efficient ready to use pack LED Tube light fitting 20 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and as directed.

S&F in repairs, square profile LED lighting fixture with extruded polycorbonate,environmental friendly,energy efficient ready to use pack LED Tube light fitting 10 Watt with LED light source 6500k with uniform light output,with all accessories including its connection with 3 core seathed copper conductor cable of size 0.5 sqmm with complete with all as specified and as directed.

M&L for sub main wiring with 2 runs of 4 sqmm, single core, PVC insulated & unsheathed FRLS cable conforming to IS-694, 1100 volts with copper conductor, multi stranded drawn in and including suitable size heavy grade casing caping (ISI marked) with all accessories such as Tees, Elbows, junction box, reducers etc as requied alongwith one run of 4 sqmm single core PVC insulated & unsheathed FRLS copper conductor as continuos earth wire dolly and connecting to existing main switch board / distribution board of each building / qtr as ordered and testing on completion including taking down old submain wiring and any type of conduit complete all as specified and as directed. NOTE: 1.Proper colour coding shall adopted for wiring (for phase-RED,YELLOW,BLUE for Earth-Green and Neutral-Black)2.Three runs of 4 sq.mm cable and one run of PVC casing & caping shall be measured as one unit.

S&F in repairs, MCB SP, AC, 240 V, 6 to 32 Amps, 10 KA capacity ,'c' series, making connection with suitable size of copper lugs etc complete all as specified and as directed.

S&F in repairs, MCB SPN, AC, 240 V, 40 to 63 Amps, 10 KA capacity ,'c' series, making connection with suitable size of lugs etc complete all as specified and as directed.

S&F in repairs, sheet metal enclosure (Factory made) double door shutter type for distribution board (when MCBs are to be used) single pole and neutral 240 volts 4 way protection class IP-42, suitable for fixing MCBs, Isolators etc, confirming As per IEC 61439-3, suitable for flush mounting and surface mounting, with 100 Amps rated copper busbar, with Neutral bar,Earthbar and cable lies for cable managment,fully shrouded,Neutral bars,prefittes masking sheet complete all as specified and as directed.

S&F in repairs, security light fitting of building with single piece new generation energy savng and environmental friendly, long life, LED 35W, made up of pressure die cast aluminium housing with acrylic covers as diffuser with IP66 protection and impact resistance of IK07 including one bracket made of light grade GI Pipe 25 mm dia, 1.5 mtr long, fixed to wall/ pole with two clamps made out of mild steel flat iron 40 mm x 5 mm and connect to nearest electric supply by two core 1.5 sqmm aluminium cable all as specified and as directed.

M&L in repairs/replacement, earthing complete with galvanized steel earth plate electrode 60 cm X 60 cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below ground level, connecting to the GI wire 4 mm dia , by means of nut bolts, check nuts and washer of the GI . Earth wire connected upto main earth point/DBs alongwith 15mm dia GI pipe, medium grade, including provision of concrete pit in PCC (1:2:4) type B-1 using 20 mm graded stone aggregates with 40 mm thick RCC (1:2:4) cover with reinforced with 8mm dia mild steel TMT bars @ 100mm centre to centre both way and frame of angle iron 25mm X 25 mm X 3mm with lugs 2 Nos and with 6 mm dia MS bar handle made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorus bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding than 50 mtr, all as per electric plate No 3 of SSR Part I 2009 and connection to earth test point all as specified including testing on completion.

S&F 300 mm sweep, exhaust fan, metal body, AC single phase, 230/ 240 V with louvers including making round hole of size 300mm dia in any type of wall and making good to match the surrounding area complete all as specified and directed.

Vinod Enterprises

M/s. A P INFRA

M/s IBEX Engineers and Contractors

M/s Automech Engineering

M/s. N D Karande

AMAR CONSTRUCTION

R. T. Saluji