E1-4493-2025-19-ECMC

Amount

Special ceiling Plastering with Cement Mortar 1:3 (One Cement and three P Sand ) 10mm thick( cement grade shall be 53 grade) including finishing, curing, etc., complete in all floors complying with standard specification and as directed by the departmental officers.

Plastering with cement mortar 1:5 (One cement and five sand) mix 12mm thick including cost of all materials and labour including curing charges complete as per standard specification

Dismantling the existing damaged Pressed Tiles including all labour charges cost and conveyance of all materials to site etc., complete as per standard specification

Chipping of concrete and roughening the surface and clearing away from the site including all labour charges etc complete as per std specification

Paving the floor with Double charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three M sand) to 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Finishing the top with one course Solar Reflective ceramic tiles (colour and shade as directed by the Departmental officer) of size 305 mm x 305mm x 7 mm thick of approved quality set in cement mortor 1::3 to (one cement and three M sand ) 12 thick and mixed with for 10M2/4.00kg of Epoxy packing conforming to iss including curing etc., complete complying with standard specification and as directed by the Departmental officers ( The Quality of solar reflective ceramic tiles should be got approved by departmental officers before use on work)

Painting two coats with ready mixed Plastic Emulsion Paint approved ( Weather Shiled) Exterior quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Supply and delivery of PVC Pipe Pipes Specials approuved quality of departmental officers loading, unloading, Frieght and transit insurance etc., Cost and conveyance of all materials to Site etc., Complete.

4" PVC Pipe

4" PVC Elbow

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires in flush with wall with 3mm thick hylum sheet cover with TW switch box and 5A FT switch and making good of the oncealed portion with suitable colour for PVC oncealed light / fan Point (for electronic regulator) (5 points per coil) SD 22

Wiring with 2x1.5 sq.mm (22/0.3) PVC insulated unseathed SC Cu. Conductor of 1100V grade in suitablev PVC rigid pipe concealed in wall and ceiling with PVC accessoires, in flush with wall, with150mm x 100 mm x 113mm TW switch box with 3mm thick hylum sheet cover for 5A 3 Pin non inter locking CS Plug with cotinuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour for PVC plug point. ( SD 36 )

Wiring with 2x4sq mm PVC unsheathed Cu cobber cable of 1100V gradee in suitable PVC rigid pipe on wall and celling with PVC accessories and with 150mmx100mmx63mm T.W. Switch box for 20A 3 pin non inter locking CS plug with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for cement, labour and making good of concealed portion with suitable colour for concealed PVC power plug point.-SD 39

Supply and run off 2 of 1.50sqm PVC insulated single core unsheathed copper conductor cable of 1100 V grade with ISI mark confirming to IS:694/1990 with continuous earth connection by means of 1.50 sqm PVC insulated single core unsheathed copper conductor cable confirming to IS:694/1990 in suitable PVC rigid pipe 1.8mm thick concealed in wall for mains including the cost of PVC pipes and specials, cables, cement, brass screws, T.W plugs, saddles and labour etc., complete in all respects as directed by the departmental officers. SD-55

Supply and fixing osf single box type 4"36w flu. Fitting complete with copper choke and condenso with TW round blocks on wall or ceiling with flu. Tube with PVC unsheathed leads from terminals to the fitting.[SD 87]

Supplying and fixing of 1200 mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 1 m down rod with fan clamp, side plates and cross arm of size departmental officers. (18") etc., complete as directed by the Departmental officers-SD 106

PTK CONSTRUCTION (BID ID -1437253)