PROVN OF SUMP WITH DRAINAGE FACILITY TO PUMP OUT THE RAIN WATER AT OFFICE COMPLEX OF ADMC AND CERTAIN MINOR WORK UNDER GE NORTH BANGALORE

Amount

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft / Loose Soil etc complete all as specified and as directed

Excavating in trenches n.exc. 1.5 mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n.exc. 10 sqm on plan and and getting out in hard / dense soil complete all as specified and directed.

Excavating over areas n.exc. 1.5 mtr in depth for UG Sump foundation, etc. and getting out in hard / dense soil complete all as specified and directed.

Excavating over areas exc. 1.5 mtr but n.exc. 3.00 mtr in in depth for UG Sump foundation, etc and getting out in hard /dense soil complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2, with using 40 mm graded stone aggregate as in foundations and mass concrete etc complete all as specified and as directed

M&L for TMT steel bars 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

M&L for TMT steel bars 6 to 8mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed.

All as per Sl Item No. 6 above but 8 mm dia TMT bars as in stirrups / spacers / binders.

M&L for Form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work, vertical or to batter for rough finished flat surfaces of concrete complete all as specified and as directed.

M&L for Form work to sides of retaining walls, basement walls, ballast walls, pillars, posts, struts, piers, columns and the like any thickness above top of footing including attached pilasters and buttersses complete all as specified and as directed.

M&L for Form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200 mm thick including roof beams with rough finished surface etc.complete all as specified and as directed.

M&L for Reinforced Cement Concrete, M-30 (Design mix) using 20mm graded stone aggregate as in foundation Rafts / footings etc complete all as specified and as directed.

M&L for Reinforced Cement Concrete, M-30 (Design mix) using 20mm graded stone aggregate as in retaining walls, basement walls, ballast walls, col and similar work and the like any thickness above top of footing inclding attached pilasters and buttersses complete all as specified and as directed.

M&L for Reinforced Cement Concrete, M-30 (Design mix) using 20mm graded stone aggregate as slab supported on wall, columns in floors roof, roof beam etc complete all as specified and as directed.

M&L for Plain Cement Concrete (1:2:4), type B-0 using 12.50mm graded stone aggregate as in floors, 25mm thick finished even and smooth with out using extra cement complete all as specified and as directed.

M&L for Hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surfac etc all as specified and as directed

M&L for 75 mm thick cement concrete (1:4:8) type D-2 with using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and as directed.

Supply and spreading of M-sand as cushioning material complete all as specified and directed

M&L for machine presssd pre-cast concrete interlocking coloured paving Block of glass fibre reinfoced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment etc complete all as specified and as directed

M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

M&L for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:4 , complete etc complete all as specified and as directed

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L for roubber moulded pre-cast Kerb stones of cement concrete 1:2:4 (20mm graded stone aggregates) factory made, size, shape, pattern and finished as approved, including rounding, chamfered or half round and bedded of perfectely levelled surface including necessary earthwork etc, pointed and jointed in CM 1:4 etc complete all as specified and as directed

M&L for Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:3) finishing the surfaces even and smooth with out using extra cement mixed with approved water proofing compound complete all as specified and directed. NOTE :- WPC will be measured and paid separately.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) finishing the surfaces even and smooth with out using extra cement mixed with approved water proofing compound complete all as specified and directed. NOTE :- WPC will be measured and paid separately.

M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering for ceiling 5 mm thick in CM 1:3 on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed

Supply only liquid water proofing compound

M&L for PCC 1:2:4 type B-0 with using (12.50mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc complete all as specified and as directed

M&L for 75 mm thick plain cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in paving/ plinth protection laid in panels including necessary form work, finished rough surfaces of concrete complete all as specified and directed

M&L for Providing precast cement concrete Type B-1 1:2:4 (20 mm graded stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:6 etc complete

M&L for preparing newly plastered surface of ceiling and applying three coat of white wash etc complete all as specified and as directed

M&L for preparing newly plastered surface of wall and applying two coat of cement base paint over a coat of primer etc complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. with soil complete all as specified and as directed

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point etc complete all as specified and as directed

M & L for sand cushioning with a layer of riddled earth 23 cm thick under and above the cable complete all as specified and as directed

S & L sub class burnt bricks for cable protection complete as specified as directed

Supply and laying cable XLPE insulated screened PVC bedded galvanised steel strip or wire armored, electric power cable (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sqmm 3.5 core with suitable lugs complete all as specified and as directed.

M & L & testing of DI (Ductile Iron) pipe 100 mm dia with spigot and socket end titen Joint class K9 conforming to IS-8329 with inside surface of centrifugally cast cement mortar lined suitable for rubber joint in any length laid in trenches all as specified and directed .

M& L for CI/DI Specials up to 150 mm bore like bends, tappers, tee pieces all sockets, all spitgot, collars, caps & plugs any size & shape as ordered by engineer- in- charge incl testing complete as specified & directed.

Supply, installation, testing & commissioning of Monoblock pump set, cast iron body of 11 KW/15 HP, 3 Phase, 2900 RPM Size 100 x 100 mm Suction & delivery, 118 m3/hr @ Min. 25 Mtr Head (Max. 37 Mtr Head) with bronze impellers including provision for fixing safety valve, non return valve etc., coupled with 3 phase induction, motor suitable for operation on 415V AC with love joy rubber coupling with channel iron base frame including nuts, bolts & washers etc., PCC foundation, foundation nuts, bolts & washers as per manufacturer instructions complete all as specified and as directed. Make : Kirloskar, Model Type - KDS-1537 or equivalent in SIEMENS / L&T.

S & F sluice valve of size 100 mm dia both side flanged and ISI marked (IS-780) , cast iron body with S/S spindle and brass fly nuts, class PN-1.6 and cast iron hand wheel and joining with nut, bolt,washers and rubber insortion packing 6mm thick etc complete all as specified and as directed.

Supply and fix Foot Valve conforming to IS 4038, 100 mm (4”) dia complete all as specified and as directed.

S&F cast iron non return valves of size 100 mm dia conforming to IS-5312 with Gun metal seating single door type gaskit joints. Bolts/nuts etc

S&F LT Control panel board, out door type, double door, padestal mounted, overall size not less than 900 x 850 x 450 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 200 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over swicth / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and provision for the following incoming and out going accessories all as approved and comprising as under : Condt/---49

M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized strip 32 x 6 mm as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed

M/S SIRI BUILDERS

M/S POTHIRAJ AND CO