Providing Electrical works at various sites under AE(E)KBN, MTNL, ND

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.Group B

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/PVC trunking as required. a)3 x 1.5 sqmm

b) 3 X 4 sqmm

c)3 x 6 sq. mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.a)20 mm

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc.(Make modular base & cover plate -Anchor/Legrand/Havells) as required. a) 2 Module (75mmX75mm)

b)3 Module (100mmX75mm)

c)4 Module (125mmX75mm)

d) 6 Module (200mmX75mm)

e) 8 Module (125mmX125mm)

f) 12 Module (200mmX150mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.(Make Anchor/Legrand/Havells) a)5/6 amps switch

b)15/16 amp switch

c)3 pin 5/6 amp socket outlet

d)6 pin 15/16 amp socket outlet

e) Stepped type electronic fan regulator

f) Bell Push

(g) Hylam sheet

S/F 4 feet LED Batten fitting with integral electronic driver and LED tube operated on 230 V 50 Hz AC Supply on surface with mounting arrangement connections etc complete as reqd (System wattage 20-22 W system, lumen output-1850-2000 lumens etc) Make-Philips/Osram/Havells/Syska

Providing and fixing call bell on wall/surface etc as reqd

P/F wall mounted decorative light with normal lamp holder and bulb (7W/9W) etc as reqd. Make-Philips/Osram/ Havells/ Bajaj/SS

SITC of 1 HP Booster Pressure Pump suitable for 230 V 50 HZ Single phase supply with pressure controller suitable to discharge constant water pressure and head of 45-7 mtr(adjustable pressure 1.5 to 5.0 bar) the pump set shall be silent operation, wide performance range with high efficiency of electric motor stainless steel part suitable to handle water 15-70 LPM (Discharge range) with 24/25 Lit pressure tank of 5.0 bar, pressure sensitive cut of mechanism i/c P/F of all type of plumbing accessories asper site requirement , C.C. work, connection,testing etc as rqd Make- M/s Crompton /Kirlosker/V-Guard

P/F wall mounted auto clean chimney(60 cm,1100 to1200 m3/hr) having filterless technology, Heat auto-clean, Motion sensor and oil collector suitable for 230V, 50HZ AC supply with noice level 58 db etc as required. Make:M/s Elica /Faber/Sunflame

Supply & installing of Electric hot water geyser capacity 3 ltr, 230 volt,50Hz AC, i/p 3000 W including following specifications Stainless steel inner tank of 304 grade, Rust and shock proof ABS outer body for long life, Fire retardant power cord for maximum safety, 0.65 MPa Bar Pressure i/c Wall Mounting Accessory and 2 Flexible pipes, water connections, electrical connections earthing the body etc as reqd. (Make: M/s Crompton / Racold/ Havells/ Bajaj/ Orient with ISI mark)

S/F 0.5HP Domestic Water Motor Pump i/c dismantling of faulty motor, making connection, testing etc as reqd.Make-M/s Kirloskar/Crompton/V-Guard

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)a)8 way Make: M/s L&T/ Havells/ Legrand

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: M/s L&T/ Havells/ Legrand a)Single pole

b)Double pole

Supplying and fixing of 25 mm PVC batten with base and cover on wall /ceiling as reqd.

S/F of following type 230 V 50 Hz AC supply metal exhaust fan with louver shutter in existing opening with necessary arrangement i/c connection etc as reqd(M/s Crompton/Usha/Havells make with ISI Marked)a)300 mm (12") Exhaust fan

Less credit for dismantled material (Dismantling of old fittings,conduits ,motor,Exhaust fans etc of required areas,wires etc at different area as per the instruction of engineer in charge etc as reqd)

S V Electrical

Mahajan Sales Corporation