Providing LWSS to ITBP and Dogra Scout Samdu in GP Gue in Tehsil Spiti Kaza Distt L and S HP

Amount

Excavation in foundation and trenches etc.( for pipes and pits) up to all depthsand all classification of earth such as pick work jumper work,saturated soil including bailing or pumping out water, blasting soft/hard rock, chiseling soft/hard rock where blasting is prohibited in all lifts including trimming and dressing of sides, levelling of bed, stacking the excavated soil clear from the edge of excavation and then returning the excavated soil in 15cm. layers including consolidating each deposited layer by ramming , watering and then disposing of all surplus excavated soil as directed in all leads/lifts and shoring strutting,timbering and dewatering where ever required as per direction of the Engineer-in-charge.

Providing and laying cement concrete 1:3:6(1cement:3 sand:6 graded stone aggregate 40mm nominal size) and curing complete excluding cost of from work in foundation and plinth.

Providing and laying cement concrete 1:6:12 (1cement:6 sand:12 graded stone aggregate 40mm nominal size) and curing complete excluding cost of from work in foundation and plinth.

SR stone masnory coursed with hard stone of apporved quailty in foundation &plinth including levelling up with cement concrete 1:6:12(1Cement :6 sand :12greded stone aggregate) in CM 1:6.

Random rubble masnory/ polygonal rubble masonry(uncoursed/brought to courses)with hard stone of apporved quailty in foundation &plinth including levelling up with cement concrete 1:6:12(1Cement :6 sand :12greded stone aggregate) in Retain wall /B/ Wall in CM 1:6.

Providing Damp proof course 38mm thick with cement concrete 1:2:4( 1cement 2sand 4 graded stone aggregate 12.50mm nominal size)curing complete in all leads and lifts

Applying a coat of hot bitumen( Mexfalt 80/100 equivalents using 1.70 Kg per sqm on damp proof course after cleaning the surface with floating piece of cloth lightly socked in kerosene oil in all leads and lifts.

Pre caste concrete block made of c.c concrete ( 1:3:6) in cement mortor 1:6 ( 1cement 6sand) in all leads and lifts

Providing wood work in frames 0f doors , windows, clearstory' windows and other frames wrought framed and fixed in position 2nd class deodar wood.

Providing and fixing panneled glazed or panneled and glazed shutters for doors, windows and clerestory windows, including black enamelled iron butt hinges with necessary screws 45 mm thick 2nd class deodar wood.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of Is specification 8 S.G. with wire of dia 0.56 mm for doors ,windows i/c bright finished black enamelled iron butt hings with necessary screws 30 mm thick of 2nd class deodar wood with in all leads and lifts complete in all respect.

Providing form work of steel plate 3.15mm thick planking so as to give a rough finish including shuttering, centring, shuttering and propping hight of propping and centring below supporting floor to ceiling not exceeding 4 mtrs and removal of the same for in-situ reinforced concrete and plain concrete work in lintels, beams etc. including all leads and lifts in:-

Beams , cantilivers , girders and lintels sides and soffits of beams ,beam hunchings , cantilivers girders , bressumers and lintels not exceeding 1 metre in depth.

Flat surface such as soffits of suspended floors, roofs, leadings the like floors etc. 200mm in thickness..

in vetical surfaces such as wall ( any thickness) partitions and like including attached pillasters. Buttress , plinth and string courses and like.

Providing and laying cement concrete 1:2:4 (1cement:2 sand:4 graded stone aggregate 20mm nominal size ) and curing excluding cost of form work and reinforcement for reinforced concrete work

in suspended floor,roofs, landings,shelves and their supports balconies, beams,girders, bressumers and centilevers upto floor two level.

Providing and laying cement concrete 1:11/2 :3 ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size )and curing complete excluding the cost of form work and reinforcement in:-

I) Foundation and plinth.

ii) Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level.

in Lintel, beams,girders, bressumers and centilevers upto floor two level.

Samooth finishing of the exposed surface with cement motor 1:3 ( 1 cement 3 sand)

cement concrete flooring 1:2:4 ( 1 cement 2 sand 4 stone aggregate 20mm nominal size ) laid in one layer finished with floating coat of neat cement 40mm thick

20 mm cement plaster in single coat on rough side of brick/ manory stone masonry, concrete walls for interior plastering upto floor two level including arrises internal rounded angles, chambers and or rounded angles not exceeding 80mm in girth and finsihed even and smooth in cement mortor 1:6 (1cement:6sand).

6mm thick cement plaster to celling in C.M 1:3 ( 1 cement :3sand ) with in all leads and lift.

Providing plinth protection 50mm thick in cement concrete 1:3:6 (1cement:3sand:6graded stone aggregate 20mm nominal size) including finishing the top surface of concrete smooth.

Providing and placing tor steel in all RCC work including bending,binding in position complete upto floor two level.

Steel work in built up section , truses & framed work i/c cutting hoisting fixing in position & applying of priming coat of red paint In R.S joist , chhannels, angles and tees (MR)

Applying two coats of wood preservative on new wood and wood based surfaces after and including preparing the surface by thoughourly cleaning dirt dust and other foreign matter

Applying priming coat over new wood and wood based surface after and including preparing the surface by thoroughly cleaning oil, grease, dust and other foreign matter, sand preparing and knotting. Ready mixed paint brushing wood primer pink.

Painting two coats ( excluding priming coat ) on new wood and wood based surfaces with enamel paint to give even shade including cleaning the surface of dust and other foreign matter, sand preparing and stopping with enamel paint other than white.

White washing with lime on un-decorated wall surfaces (with two coats) to give an even shade including thoroughty brooming the surface to remove all dirt,dust,mortor dirt and other foreign matter.

Finishing wall with water proof cement paint (Two Coats) of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade sand papered smooth.

Distempering (Two coats) with oil bound distemper of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade sand papered smooth.

Providing and Fixing MS Fan Clamp type -1 of 16 mm dia bar bent to shape with hooked ends in RCC slab during laying including the painting of exposed portion of loop all as per standred design complete.

Providing & fixing 40x3 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embending in c.c. block 30x10x15 cm 1:3:6 ( 1 cement:3 sand: 6 graded stone aggregate 20 mm nominal size).

Providing and fixing following anodised aluminium fittings of anodized transparent and shade with necessary screw etc.complete .

Door bolts Sliding 250 x 16 mm.

Tower Bolts ( Barrel Type) 200 x 10 mm.

Tower Bolts ( Barrel Type) 150 x 10 mm.

Tower Bolts ( Barrel Type) 100 x 10 mm.

Providing and fixing Oxidized M S Handel with necessary srews etc complete. 125 mm

Providing and fixing Oxidized M S Handel with necessary srews etc complete. 75 mm

Providing and fixing round bars ( 16mm) in window and ventilators

Providing boulder filling under floor in all leads and lifts complete.

Providing and laying GMS / M.G Tube ( M.G) class tube fitting

inlet

Outlet

Providing and fixing GMS Peet valve ( with hand Wheel) 50mm

Providing and fixing SFRCE men whole cover with frame having frame size of 560 mm internal dia ( M.Duty) the weight of cover and frame should not be less than 100 Kg

Providing Laying and jointing in trenches including testing complete, HDPE pipe 10Kgf/cm² working pressure polyethylene pipe high density confirming to IS 4984-1972 complete with compression type fitting(earth work in trenches to be measured and paid for separately).

Cutting in earth work in all kind and classification of soil such as pick work, jumper work, blasting work, saturated soil including chiselling/ wedging out of rocks ( where blasting work is prohibited ) conglomerate rocks and mixed variety of soil etc. up to all leads and lifts stacking the serviceable and unserviceable material separately and disposal of excavated earth with in all leads and lifts.

Wire crates made of Interlink chain filled with boulders with square cut faces against the wire (Wire crate to be measured and paid for separately) within all leads and lifts.

Wire crates made of Interlink chain filled with boulders with square cut faces against the wire (boulders filling to be measured and paid for separately) interlink chain 5mm thick corresponding to SWG – 6, 15cmx15cm mesh within all leads and lifts.

GATUK CHHERING

M/S TASHI DOLKAR CONTR4ACTOR

TESHI CHHERING

TANZIN ANGDUI