ECHP-I- Replacement of wornout head pulley in SFD-5C size 800 x 1400 x 140 x 2300mm and tail pulley in SFD-5A size 630 x 1400 x 125 x 2100mm by a reconditioned conveyor pulley at Secondary Crusher House-I

Charges for replacement of wornout head pulley (size: 800 X 1400 X 140 X 2300 mm) and tail pulley (size: 630 X 1400 X 125 X 2100 mm) by a reconditioned conveyor pulleys in Shuttle feeder of SFD-5C and SFD-5A work involves removing the skirt board assembly with rubber, idler frame with roller, supporting angles - Pulling the belt slack by using pull lift arrangement and then arresting the belt and getting loosened the belt around the pulley - locking the conveyor pulley and dismantling the Plummer block and removing the bearing, sleeve, lock nut on both sides of damaged conveyor pulley - Removing the damaged conveyor pulley from its position and unloading the conveyor pulley to ground floor by using chain block arrangements - Assembling the bearing, sleeve, lock nut etc., on both sides of reconditioned conveyor pulley - loading and lifting the bearing assembled reconditioned conveyor pulley shifting to existing pulley seating location and then proper positioning the pulley and Plummer blocks bolt tightness checking on both sides - Greasing the pulley bearings on both sides and closing the Plummer block top cover and well tightness checking of all plummer block bolts - Checking the free rotation of conveyor pulley - After completion of pulley commissioning work then refixing of all the released items - Finally, conducting trail running of feeders and correcting the conveyor belt in correct position by belt tracking etc., including hire charges for T & P's, and consumables etc., complete.