Loading
Loading…
Loading…
Tender Value
₹4.9 Cr
EMD Value
₹4.0 L
Closing Date
9 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
LUCKNOW
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Similar nature for this work is "Any Civil work other than track work" is for technical experience/competence of advertised work in terms of Pr. Chief Engineer Circular No. 610 (Revised-3). As per the HQ/NDLS letter No. 74- W/0/Pt.XXV/Similar Nature of Works/WA dated 22-01-2020.
24 conditions · 10 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Tenderers are advised to visit the site of work to ascertain all aspects of the site conditions viz accessibility, availability of approach road, nature of the soil, availability of material, availability of labour etc. that may be encountered in course of execution of work.
Improvement of fire fighting system in Carriage Workshop, Alambagh, Lucknow in the section of SSE/W/Workshop/AMV under ADEN/ Workshop/AMV/Lucknow.
32-SrDEN-I-LKO-2025-26~NR
32-SrDEN-I-LKO-2025-26
Open
Works - General
6 Months
Lucknow, Uttar Pradesh
₹0
₹4.0 L
9 Feb 2026
16 Jan 2026
26 Jan 2026
26 items across 1 schedule · ₹5,58,81,448.1 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| Laying in position centrifugally cast (spun) iron S&S or flanged pipes (excluding cost of pipe). | Quintal | 450.00 | 298.5 | 1,34,325 | |
| 2 | "Laying in position S&S or flanged C.I. special such as tees, bends, collars, tapers and caps etc.(excluding cost of specials). " | Quintal | 450.00 | 546 | 2,45,700 |
| 3 | Constructing masonry Chamber 120x120x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 | Each | 27.00 | 24,388.85 | 6,58,498.95 |
| 4 | "Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class): " Up to 300 mm dia | Quintal | 500.00 | 5,649.65 | 28,24,825 |
| 5 | "Providing and laying S&S C.I. standard specials such as tees, bends, collars, tapers, caps etc. (Heavy class):Over 300 mm dia " | Quintal | 500.00 | 5,649.65 | 28,24,825 |
| 6 | Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 :Over 300 mm dia | Quintal | 400.00 | 7,589.65 | 30,35,860 |
| 7 | "Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :" 150 mm dia pipe " " | Metre | 7000.00 | 1,824.7 | 1,27,72,900 |
| 8 | "Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : 200 mm dia pipe " | Metre | 4500.00 | 3,083.65 | 1,38,76,425 |
| 9 | "Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : " 250 mm dia pipe | Metre | 1500.00 | 4,030.5 | 60,45,750 |
| 10 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead 100 mm diameter pipe | Each | 501.00 | 410.25 | 2,05,535.25 |
| 11 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead 150 mm diameter pipe | Each | 501.00 | 615.75 | 3,08,490.75 |
| 12 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead 200 mm diameter pipe | Each | 500.00 | 818.35 | 4,09,175 |
| 13 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead 250 mm diameter pipe | Each | 500.00 | 1,023.05 | 5,11,525 |
| 14 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 | Each | 31.00 | 1,712.15 | 53,076.65 |
| 15 | "Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : " With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 | Each | 40.00 | 17,577.9 | 7,03,116 |
| 16 | Providing and laying flanged C.I. standard specials such as tees, bends, collars, tapers, caps etc., suitable for flanged jointing as per IS : 1538 : Up to 300 mm dia | Quintal | 400.00 | 8,191.75 | 32,76,700 |
| 17 | "Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 : " 100 mm dia pipe | Metre | 3000.00 | 1,210.5 | 36,31,500 |
| 18 | "Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : " "With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 " | Each | 10.00 | 10,102.5 | 1,01,025 |
| 19 | "Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : " 100 mm diameter Class I | Each | 100.00 | 4,097.9 | 4,09,790 |
| 20 | "Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : " 100 mm diameter Class II | Each | 30.00 | 4,500.25 | 1,35,007.5 |
| 21 | "Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :" 150 mm diameter Class I | Each | 100.00 | 5,980.45 | 5,98,045 |
| 22 | "Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :" 150 mm diameter " Class II | Each | 30.00 | 6,661.8 | 1,99,854 |
| 23 | "Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : " 200 mm diameter Class I | Each | 70.00 | 11,609.5 | 8,12,665 |
| 24 | "Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : " 200 mm diameter " Class II " | Each | 40.00 | 13,512.6 | 5,40,504 |
| 25 | "Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : " 250 mm diameter Class I | Each | 40.00 | 16,748.5 | 6,69,940 |
| 26 | "Providing and fixing C.I. sluice valves (with cap) complete with bolts, nuts, rubber insertions etc. (the tail pieces if required will be paid separately) : " 250 mm diameter Class II | Each | 40.00 | 22,409.75 | 8,96,390 |
| Schedule total | ₹5,58,81,448.1 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .