SPL REPAIR TO BLDG NO T-32 CHDH (8FR) AT POONCH UNDER GE 881 EWS

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed

Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws coomplete all as specified and directed.

Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws as specified and directed.

Dismantling mild steel work as in wind tie,grill, gratings etc complete all as specified and directed.

Dismantling timber scantling under 40 sq cm in section in any position in framed work in fillets, rails, posts, rafters,purlins, etc.complete all as specified and directed.

Rolled mild steel work as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.condorming to Fe 410W (Gde E-250) complete all as specified and directed.

Applying two coats of synthetic enamel paint on new steel surfaces over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces complete all as specified and directed.

Preparation of old painted steel surface of any description exc.10cm. in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down cement plaster from stone/brick walls including raking out joints, hacking for keys and scrubbing down with water etc, complete all as specified and directed.

Rendering 15 mm thick on stone masonry surface or other than fair face of brick work or on one side of lathing, finished even & smooth without using extra cement in CM 1:6, complete all as specified and directed.

Rendering 15 mm thick on stone masonry surface or other than fair face of brick work or on one side of lathing finished even & smooth without using extra cement in CM 1:4, complete all as specified and directed.

Preparation of new plastered surface of Wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ .90 ltr/10 sqm over new surfaces in painting on walls in camouflage pattern with combination of minimum five colours as approved by GE complete all as specified and as directed.

Preparing New plastered or unplastered surfaces of walls and applying two coat of distemper oil emulsion complete all as specified and directed

Complete removal of existing treatment and preparing plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and directed.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Walling of random rubble stone masonry,brought upto course,well bonded bedded, and solidly hearted, built in CM 1:6, complete all as specified & directed.

Walling of random rubble stone masonry,brought upto course,well bonded bedded and solidly hearted, built in CM 1:6, but except stone complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.

75mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed.

75mm thick PCC 1:4:8 type D-2 (using 20mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. complete all as specified and directed.

Machine cut pre polished kota stone slab flooring 18-20mm thick bedded and jointed with grey cement sluury mixed with pigment to match the shade of the kota stone slab as approved by GE, laid over and including a screed bed of 20mm thick in cement mortar 1:4 including cutting, grinding and mirror polishing, complete all as specified and directed.

Machine cut pre polished Kota stone 18-20mm thick as in riser of steps, skirting, dado and pillar fixed over & including cement plaster 10mm thick in CM 1:3 and jointed with grey cement slurry mixed with pigment to match the shade of the kota stone including rubbing and polishing including taking down old cement plaster on brick of stone wall, complete all as specified.

20mm thick granite (of approved type colour) work (table rubbed & polished) in jambs, pillars, window cills, cooking plateform laid over and including 15mm thick cement screed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the colour of granite stone including cutting and moulding the edges, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tile to store and rubbish off the premises complete all as specified and directed.

Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed.

Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 10mm thick rendering in cement mortar 1:3, complete all as specified and directed by Engr-In-Charge.

25 mm thick PCC 1:2:4, type B-0 using 12.50mm graded crushed stone aggregates as in levelling course to floor surface complete all as specified and directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sq. m each complete all as specified and directed.

Taking down Chowkats or frames exc 1.5 sqm but n.exc 4 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Factory made Pressed steel frames of size 105x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed.

Factory made Pressed steel frames of size 125x60mm made out of PBI sheet 1.25 mm thick for doors with one or more rebates including necessary fixing lugs, hinge,lock strike plate etc.complete including bottom of each chowkat to be welded with 02 Nos 25x3mm thick Flat iron projecting 10cm on either side & PCC 1:3:6 type C-0 in back filling of chowkats & tarring back of chowkats and hold fasts complete all as specified & directed.

35mm thick 2nd class hard wood plain, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood partilcle board with commercial face veneers complete all as specified and directed.

35mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats, complete all as specified and directed.

Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed.

Steel windows or ventilators, fixed type, with glazing bars all as specified and directed.

3mm thick Sheet glass of ordinary quality,glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and directed.

S&F in repairs galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aparture 1.18mm and fixed with tinned tacks or galvanised wire stapple complete all as specified and directed.

Preparation of wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer all as specified and directed.

Preparation of old painted wooden surfaces of any description over 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Mild steel butt hinges, medium weight, cold rolled,100mm long, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section of size 100mm and fixed, complete all as specified and directed.

Aluminium anodised, barrel tower bolts of extruded section of size 150mm and fixed, complete all as specified and directed.

Aluminium alloy handles, cast type, anodised of size 100mm and fixed, complete all as specified and directed.

Aluminium alloy handles, cast type, anodised of size 150mm and fixed, complete all as specified and directed.

300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

Factory made solid core PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC sheet, 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap inserted for top rail and bottom rail; panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified and directed by Engineer-in-Charge.

Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed.

Rotational moulded polyethylene water storage tanks, ISI marked, tripple layer, (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of existing water tank and removing it from site complete all as specified and directed.

20mm dia PVC float valves high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed as required to use reducer and check nut complete all as specified and directed

20mm bore gun metal globe or gate valve (ISI marked) with iron wheel head,screwed both ends for iron pipe fixed in repair complete all as specified and directed.

15mm bore Stop valve/angle cock, cast copper alloy chromium plated fancy type screwed down high pressure with crutch or butter-fly handle, screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified and directed

Stop cock fancy type, chromium plated with long shank and cup (concealed type) (ISI Marked), cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore and fixed in repair complete all as specified and directed.

Bib tap 15 mm bore, Chromium Plated, fancy type (long shank) with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and directed.

Pillar taps 15mm bore, fancy type,cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs, complete all as specified and directed.

Steel water tubing of 15 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors, complete all as specified and directed.

Steel water tubing of 20 mm bore ‘medium grade’ galvanized with all fittings like socket, union, elbow, bend, tees etc fixed to walls and ceilings or laid in floors,complete all as specified and directed.

PVC connection 15mm size with CP nuts on both ends of length 600mm fixed in repairs, complete all as specified and directed.

PVC (SWR) floor trap of 75mm dia of outlet, plain with grating including jointing with solvent cement fixed in repair, complete all as specified and directed.

PVC (SWR) pipes 75mm dia, Type B, any length single socketed with rubber ring joint, laid in floor/walls, fixed in repair, complete all as specified and directed.

Soap dish of CP fixed with and including chromium plated brass screws and wooden/plastic plugs, fixed in repairs, complete all as specified and directed.

S&F fixing in repairs squatting pan Orrisa pattern of size 580 x 440 mm white, with integral foot rests including connection to trap, flushing cistern and flushing pipe, anti-syphonage pipe, etc. complete including 110 mm dia PVC (SWR) 'S' trap including lime concrete bedding and jointing to existing pipe of floor of size 100mm complete all as specified and as directed.

Supply & fixed in repair, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified.

Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union all as specified and directed

PVC Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and directed.

110mm PVC (SWR) pipes, Type B, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

PVC (SWR) bends any radius 110mm bore fixed, complete all as specified and directed.

Dismantling wall and ceiling board (fibre, pulp, PVC, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillets complete all as specified and directed.

Anodised aluminium snap grid Size of grid 605 x 605mm frame work for false ceiling and Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling including 4mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screwsall as specifiedr complete all as specified and directed.

Chequered cement concrete tiles 300x300x 25mm thick, set and jointed in neat cement slurry laid over and including 20mm thick screed bed in CM 1:4 and pointed in white or colured cement mixed with mixture of pigments to match with the colour of tiles complete all as specified and as directed.

E/M PORTION:- Taking down carefully copper/aluminium point wiring for light, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose, celing fan etc to match with existing finishes complete all as specified and directed.

Point wiring with 2x1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and 1x1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of approporiate size and all requisite accessories such as PVC elbow, Tee, collars, bends etc with PVC terminals box& cover for mounting switches, sockets, fan regulator etc complete all as specified and as directed for the following:-

One light/fan point controlled by one switch complete all as specified and directed.

One 5 Pin, 6 amp socket outlet on same board complete all as specified and directed.

One 5 Pin, 6 amp socket outlet on independent board complete all as specified and directed.

All as per item No. 78 above but with two 2.5 sqmm size cable as phase and neutral and one 2.5 sqmm size cable as earth continuity for 15/20 amp multipurpose socket outlet on independent board complete all as specified and directed.

Ceiling rose, 3 phase,bakelite 65x50mm two or three therminals complete all as specified and directed.

Piano Type switch , 1 way, 6 amp, flush type complete all as specified and directed.

Socket outlet 2 in 1, 5 pin 6 Amps, flush type complete all as specified and directed.

Switch socket combination 2 in 1 , 5 pin 6 Amp, flush type complete all as specified and directed.

Switch socket combination 2 in 1 , 5 pin 6 and 16 Amp, flush type complete all as specified and directed.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

Inverted Led Lamp , CDL 12 Watt , B22 base complete all as specified and as directed.

Supply and fix in repairs Electronic step regulator (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep complete all as specified and as directed.

Supply and fixing in repair Inverter LED light fittings, 1x20 w LED, 230 V complete with all accessories internally per wired including lithium Ion battery with charging time 8-10 hours and back up time upto 4 hours and connecting up with PVC insulated and sheathed, 1100 v grade, flexible, multistranded copper conductor three core cable complete all as directed.

S&F in repair ceiling mounting LED light fittings luminaire 600mmx600mm,35/36 watt, 220 v, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver , holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size complete all as specified and directed.

Supply and fixing in replacement LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixing in repairs BLDC Five star rated Ceiling fans complete with blades, downrods, electronic regulator and accessories, 230V , 1200 mm sweep, with Minimum air delivery 210 CFM complete all as specified and directed.

S&F in repair vertical TPN DB sheet metal enclosure double door (IP-43), 4 ways, built-in bus bars complete suitable for 415 volts,AC ,50Hz complete all as specified and directed

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. complete all as specified and directed.

Plug&Socket DB, CRCA sheet steel, powder coated, with metal plug & socket 3 pin with 20 Amps MCB SP complete all as specified

Supply and fixing in repair Exhaust fan, steel body AC single Phase 230V of size 300mm sweep with, blades, and frame and louvers, complete all as specified and directed.

Supply and Fixing in repair Sheet Metal enclosure for SPN DBs, 12 Ways, Double Door (IP-43), with netral link complete suitable for 240 Volts, AC, 50 Hz complete all as specified and directed.

Supply and fixing in repair MCCB, TPN, 415 volts, breaking capacity 10KA, rating 25 to 100 Amps, complete all as specified and as directed.

Supply and Fixing in repair MCBs, SPN, 240 volts, breaking capacity 10 KA, 'C' series, rating 40-63 amps, complete all as specified and as directed.

Supply and Fixing in repair MCB, SP,240 volts, breaking capacity 10 KA, 'C' series, rating 6 to 40 amps, complete all as specified and as directed.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 m below ground level) with top edge of the earth plate not less than 1.5 m below ground level, connected to GI earth wire 4mm dia by means of bolts, nuts,check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part-I, connected to earth test point all as specified or indicated including excavation and connected earth work in soft / loose soil, P.C.C 1:3:6 type C-1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick R.C.C. 1:2:4 type B-1 cover slab of earth pit reinforced with 8mm dia TMT bars @ 10cm C/C both ways and with handle made out of 10mm dia bars, funnel, strainer,charcoal and testing on completion including dismantling unserviceable earthing complete all as specified and as directed.

Sub main wiring with single core cable 2 x 6 sqmm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade drawn through PVC casing/caping 25 mm dia ISI marked fixed on wall/ceiling, alongwith 1x4 Sqmm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly , complete all as specified and directed. Note:-Two runs of 6sqmm cable alongwith one run of 4sqmm PVC insulated copper conductor as earh wire incl casing caping shall be measured as one unit.

Supply laying jointing and testing LT XLPE and PVC insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sqmm 4 core, incl taking down old unsv cable complete all as specified and directed.

Exc in trenches not exc. 1.5 m wide and exc. 1.5 in depth for foundation of poles, stay assy etc. and getting out in hard / dense soil complete all as specified and directed.

Returning, filling in including spreading, leveling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site

Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed.

Supply and fixing DWC HDPE pipe for protection of power cable (orange in colour) of size 50 mm dia complete with fittings and including cutting, jointing and clamping all as specified and directed.