Improvement works to Shopping Complex building Shop No 09 to 15 near park at Vallur camp

Amount

Dismantling the PCC and clearing the debris 2 away from the site as directed by the Engineer at site, including the cost of all materials, labour, lead, lift, T&P etc., complete

Patch plastering the wall in cm 1:3 mix 12mm thick over brick wall after removing the peel off/ damaged plaster surface for an average area of 8 m2 as directed at site including the cost of all materials, labour, lead, lift, T&P etc., complete..

Patch plastering to the ceiling/sun shades in cm 1:3 mix 20mm thick over concrete surface after removing the peel off/ damaged plaster surface with nito bond AR at 1000 ml for an average area of 8 m2 as directed at site including the cost of all materials, labour, lead, lift, T&P etc., complete.

Removing and refixing of aluminium window glazed shutters after replacement of damaged aluminium hinches with new hinches including cost of inches and labour charges, etc., complete.

Providing and fixing of 5.5 mm thick plain glass for Windows including labour charges, lead, lift, cutting charges, T&P, etc., complete.

Providing ornamental grills for windows using 20 x 5 mm Ms Flats as shown in the drawing and fixing in position, including the cost of all materials, labour, lead , lift, T&P, etc., and as directed by the Engineer at the site.

Providing PCC 1:3:6 using 12-20mm HBG metal including cost of all materials, labour, lead, lift, etc., complete as directed by the Engineer at site

Painting the ornamental M.S. grill works with enamel paint including labour charges, thorough scrapping, clean removal of dirt, etc., complete.a.Painting old iron works one coat

B. Painting new iron work two coat over one coat primer

Painting two coats of Acrylic Distember to the interior wall surface with approved quality and colour, with through scrapping and washing the surface removing of dirt.algae etc., including necessary plaster of paris, putty where ever required including all cost of labour, lead, scaffolding etc., complete as per direction Engineer at site

Painting one coat of white cement over ceiling surface including all cost of labour, lead, scaffolding, etc., complete as per direction Engineer at site

Painting two coats to the exterior wall surface with ready-mixed plastic emulsion of first class quality paint and of approved colour, including thorough scrapping, clean removal of dirt, etc., complete and including plaster of paris, putty wherever required.

Paving the floor with design Vitrified tiles (colour and shade as directed) of size 600 mm x 600mm x 8 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand) 20mm thick laid in-situ and pointed with same coloured cement.

Wiring with 2x2.5 sq.mm PVC unsheathed SC Copper cable of 650V grade in suitable PVC 16mm dia rigid pipe on wall and ceiling with PVC accessories and with TW switch box with painting of suitable colour with continuous earth wire connection of 14SWG TC wire for open PVC light point/fan point

Wiring with 2x2.5 Sq.mm.PVC unsheathed SC.alu. Cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x150x33mm TW Switch box for 5A 3 pin non-interlocking CS plug with painting of suitable colour with continuous earth wire connection 14SWG TC Wire for open plug point.

Wiring with 2x6 Sq.mm.PVC Sheathed SC.alu. Cable of 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x63mm TW Switch box for 15A 3 pin non-interlocking CS plug with painting of suitable colour of 14SWG TC Wire for open PVC Power plug point.

Providing and fixing of single box type 4'40W flu fitting complete with copper choke and condenser with TW round block on wall or ceiling with flu. Tube with PVC unsheathed leads from terminals to the fitting.

Providing 0.60m x 0.45m size Aluminium ventilators made of aluminium Box section of size 101.6x44.45x3.18mm with three nos 16mm MS rod, 3mm thick pin headed glass loovers 5 nos, including the cost of all materials, labour, lead, lift, T&P, etc., complete.

Repair work to the rolling shutter by removing top cover, dismantling the lath from the roller, removing the spring, removing shaft reconditioning of the shaft and the spring , strengthening of shaft assembly and refixing in position including cost of all labour, lead, lift, material required, T&P, etc., complete as directed by the Engineer at site

Providing fly proof mesh to the including necessary hook, sticker tape for fixing, including cost of all materials, labour for fixing, etc., complete

V.R. ENTERPRISES