REPAIR REPLACEMENT TO WALL PLASTERING WORK STONE ROOF STRENGTHENING PLINTH PROTECTION VERANDAH KOTA STONE FLOORING SANITARY WARE WALL MOUNT UTENSILS RACK AND OTHER ASSOCIATED WORK AT SEWAR FORT AND PERIODICAL SERVICES TO CERTAIN BLDG JOINERY PVC DOOR

Amount

Taking down cement plaster of any description including racking out joints,hacking for key, scrubbing down with water complete all as specified.

M&L for Rendering 15 mm thick in CM (1:6) on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing complete all as specified.

All as above item no 2 but in CM (1:4) on fair faces finished even and smooth without using extra cement complete all as specified.

M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer complete all as specified.

M&L preparation of old decorated plastered or undecorated plastered surface of wall by complete removal of existing treatment including washing including cornices, pilasters etc and applying two coats of oil bound distemper over a coat of primer over 3mm thick wall care putty on surface of walls complete all as specified.

M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of primer with hand roller complete all as specified.

M&L Preparation of newly plastered surfaces of Wall & applying three coats of white wash complete all as specified.

M&L preparation of old decorated plastered surfaces of walls etc by complete removal of existing treatment incl washing rubbing down and stopping and applying two coats of cement base paint over a coat of primeron wall surfaces etc complete all as specified.

Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified.

M&L Brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified.

All as Item No 10 but except bricks

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified.

Taking down shutter of any description area exc 1 sqm and n. exc 2 sqm complete all as specified.

Rescuring without taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified.

Providing and Fixing of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 with Zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer as per reqs size. (Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Handle, stay, 2nos of heavy duty stain less steel pivot hinges and 2 No's of Aluminium Powder Coated Tower Bolt shall be provided per shutter.) complete all as specified. Note:- Quoted rate include 4mm thick Plain float glass ,S.S.304 Grade Wire Mesh & M.S Powder Coated 10mm Square guard bars with 6” (152.4mm) pitch & Installation Charges.

Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick 'D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer (Section for louvered ventilators should be of 33 x 56 mm Box section and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screws) complete all as specified. Note:- Quoted rate include 4mm thick Plain float glass M.S Powder Coated 10mm Square guard bars with 6” (152.4mm) pitch & Installation Charges.

M&L powder coated aluminium ventilator, openable top hung without sash bars with aluminium section w eight 0.55 kg /m including necessary joining cleats,glaging clips,rubber packing, anodized, aluminium snap beading,screws and top hung shutter fixed hook & eye minium one nos each shutter including one nos aluminum tower bolt 100 mm long and 75 mm long aluminum handle in each shutter etc. (glass panes /wire mesh shall be measured and paid separately) complete all as specified.

S & F anodised aluminium frame for ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.

S&F powder coated Aluminium door partly glazed (using 5mm thick glass) and partly panelled (using 12mm thick both side prelaminated board) door with bottom rail of section 114x44.5x1.5mm thick and middle and top rail and style of section 84x44.45x 1.5mm thick incl 125mm dia circular aluminium handle tower bolt, mortice lock of brass size 65mm, vertical type with four levers, door stopper double leg rubber beading and door spring door stopper, hinges (three Nos each side) etc and aluminium frame of section 100x44.45x2.00mm thick complete all as specified.

Supply and fixing 4mm thick ordinary sheet glass and glazing with oil putty complete in squares not exc 0.50 Sqm each pane complete all as specified.

S&F for sollid PVC door frame of size 50mmx47mm made out of 5mm plain colour pvc sheet reinforced with m.s. squre tube complete all as specified.

Supplying & fixing in the frames at site factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and shown in SSR 2020 (Part-II)

S&F 35 mm thick 2nd class hardwood factory made plain framed, panelled shutters (any No. of panels) with lock rail and panel of 9mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces rail & stiles as per IS:1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified.

M&L for rolled mild steel framed work such as grill grating etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors , laddres, door gate frame, framed baliusters, walk ways, railing , frame work of water tank and similar work conforming to Fe-290, Gde-E-165 complete all as specified.

S&f rolled section as in framing for door/vent/CB Chowkhats and gates etc conforming to FE-410W (Gde E-250) quality A & the like fixed with angle cleat and connecting plates complete all as specified.

S&F MS holdfast, hook and pintle hinges, large hasp and staples, clamps, hooks for hanging fans and similar small articles conforming to Fe-290 Gde E-165 including necessary welding etc. and fixed in position complete all as specified.

S&F 100 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified.

S&F 150 mm long mild steel barrel tower bolts stove enameled black with bright bolt (ISI marked) complete all as specified.

Mild pressed steel bow handle oval type stove enameled black of size 150 mm (ISI marked) complete all as specified.

S&F MS sliding door bolt, plate type, 300mm long, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, 4 on bolt plate and 2 on staple plate and fixed complete all as specified.

S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked complete all as specified.

S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed complete all as specified.

S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked,complete all as specified.

S&F Aluminum handle cast type anodized 125mm complete all as specified.

S&F 200mm long MS barrel tower bolt, stove enamelled black, with bright bold complete all as specified.

Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L Glazed ceramic tiles,in verticle surface 450X300X7mm set & jointed in neat cement slurry and pointed in white or colour cement to match the existing surface over and including 15mm thick rendering in CM 1:4 complete all as specified.

M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in coloured cement over & including 15mm thick rendering in CM 1:4 complete all as specified.

M&L non skid ceramic coloured tiles 400x400x7 to 8mm thick in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match incl screed bed of 15mm thick in CM (1:6) for laying floor tiles complete all as specified.

M&L for Vitrified ceramic tiles and including 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm , over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M & L for Endura Designer Collection Series of Jhonson Tiles ,Kajaria or somani tile of size 300X300X10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified.

Demolition of cement concrete (unreinforced) in ground floor and paving,plinth protection n.exc 15 CM thickness (below or above GL) complete all as specified.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid be defect and pointed in any mortar complete all as specified.

M&L for 25mm thick plain cement concrete 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in sub-base of florring complete all as specified.

M&L Non - skid Ceramic colored tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc over 10 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25 mm thick over and including cement screed 20 mm thick in cement mortar 1:6, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for Machine cut kota stone slab 20-25 mm thick in riser of steps, skirting, dedo and pillar laid over over and including cement screed 15 mm thick in cement mortar 1:4, laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.

M&L for PCC 1:3:6 type C-1 ( 20 mm graded stone aggregate) as in plinth protection , 50 mm thick complete all as specified.

taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-

(a) 15 mm bore

(b) 20 mm bore

S&F in repair for Corner Glass Shelf (with Bracket Complete all as specified (Make;- Jaquar cat part no ACN-1173 or eqv in Perryware , Hindware )

S&F in repair Glass Shelf 550mm long complete all as specified. (Make;- Jaquar cat part no AQN-7771) or equivalent in parry ware or hind ware.

S&F in repair 25mm dia S.S Pipe curtain Rod with nickel plated brackets & Decorative end cap Complete all as specified.

S&F in repair stainless steel kitchen plate rack made of SS Steel of size 24"X26"X10" fixed with screw on wall complete all as specified.

S&F in repair for PVC wall panelling with panel of 300 mm x 6 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angel fixed with solvent cement complete all as specified.

Dismantling stone slabs in roofs, suspended floors, chajjas, landings,lintel band etc., any thickness, jointed in any mortar complete all as specified.

M&L for sand stone slabs 7.5 cm thick in sun shades, lintel stone , shelves, cills, landings, cover stones, templates, etc. n. exc. 3 m in length, punched dressed on face and along exposed edges, self faced on other side and set in lime mortar 1:2 or cement mortar 1:4 complete all as specified.

Dismantling corrugated or semi corrugated Asbestos cement sheets in roof coverings complete all as specified.

S&F for pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified.

S&F for pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in ridge , fixed with self tapping screws complete all as specified.

S&F in repair vitreous china wash hand basin with pedestal, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets & pedestal , cutting for and pinning in ends of brackets or erecting stand complete all as specified.

S&F pillar tap, cast copper alloy with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified.

Dismantling of wrought iron or mild steel work of any description & fixed in any position, complete all as specified.

Cutting holes exc 150 sqcm but n.exc 400 sq cm into or through brick walls, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified.

S & F Fe 410-W (Gde E-250)) quality B rolled mild steel in Joist channel, angle or tee,I sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e, within 20mm of the length indicated) complete all as specified.

Painting to new or previously untreated steel surfaces of any description over 10 cm in width or girth with two coats of synthetic enamel paint over a coat of Zinc chrome primer including preparation of surfaces complete all as specified.

M & L prepration of new wood or wood based surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L painting one coat of synthetic enamel paint on old wooden surfaces of width or girth exc 10CM , including preparation of surfaces complete all as specified.

M&L painting one coat of synthetic enamel paint on old steel surfaces of grith exc 10CM , including preparation of surfaces complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation, boards/slabs/blankets, any thickness, including cover fillets and frame work complete all as specified.

S&F 4mm thick Everest designer E-Board fixed or laid/inserted to timber/GI/Aluminium ceiling frame work with screws complete all as specified.

S&F anodised aluminium snap grid frame work of size 605x605mm for false ceiling complete all as specified.

S&F hangers 6mm dia. G.I (up to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and hold fasterners 12.5mm dia 40mm long complete all as specified.

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type complete all as specified. (also including the rate for disposal of building rubbish/ malba of dismantled or waste material collected after demolition of existing treatment & dumping for lead upto 1km for all lifts)

M&L providing cement concrete type B-o (1:2:4), using 12.50mm graded stone aggregate as in roof kerbs, benching, rounded or chamfered on edges complete all as specified.

M&L Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the rati of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application /system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete all as specified.

M&L for 15mm thick rendering in CM (1:3) as in old RCC roof surfaces and sunken or concrete surfaces mixed with water proofing compound finished fair and even complete all as specified. (Note:- WPC shall be supplied and paid separately)

Supply only water proofing compound ISI marked complete all as specified.

M&L PCC (1:3:6) type C-2, using 40mm graded stone aggregate, 75mm thick finished even & smooth without using extra cement all as in plinth protction complete all as specified.

Demolition and breaking up drain pipes (SGSW, AC or reinforced cement) set in cement mortor internal dia of pipe 100mm complete all as specified.

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified.

Dismantling of cast iron drain pipes & fittings, jointed in cemenet mortar and taking out of trench required internal dia of pipe 75mm complete all as specified.

S&F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified.

S&F 110mm bore PVC (SWR) bends any radius complete all as specified.

S&F 75mm bore PVC (SWR) bends any radius complete all as specified.

S&F tubular towel rails 20mm dia, D type 60mm long between flanges of aluminum anodized complete all as specified.

S&F PVC low level flushing cistern 10 ltrs capacity incl PVC float valves, PVC connection and out let pipes complete all as specified.

Supply and fixing 500 ltrs capacity rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) of three layer hoisted and fixed in position including dismantling existing water tanks complete all as specified.

S&F in repair bib taps cast copper alloys with crutch or butterfly handles, screwed down, screwed for iron pipe or for brass ferrule & fixed for 15mm bore GI pipe all as specified.

S&F in repair chromium plated 15mm bore stop valve /Angle valve cast copper alloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repair chromium plated 15mm bore dia concealed type stop valve cast copper alloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified.

S&F in repair brass CP shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified.

S&F tubular towel rail 20mm dia D type 60cm long between flanges brass CP complete all as specified.

S&F PVC Connection 15mm size with PTMT nuts of length 450m complete all as specified.

S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 20 mm dia complete all as specified.

S&F 15 mm bore, brass CP WHB mixer for mixing hot & cold water screwed down for iron pipe complete all as specified.

S&F Soap Dish Holder complete all as specified.

M&L salt glazed stone ware gully traps 150x150mm , square mouth "P" type complete all as specified.

M&L cast iron Nahani trap 75mm out let dia meter with grating incluiding jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified.

Dismantling of interlocking tiles of any description , any thickness complete all as specified.

M&L for 60mm thick & M-35 factory made chamfered edge Cement Concrete paver blocks of required strength, thickness & size/ shape, made by table vibratory method using PU mould/rubber molded, laid in required colour & pattern over and including 25mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified.

S&F rolled mild steel work as in post ,roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' complete all as specified .

Dismantling of old U/S grating of any description or size and S&F MS chromium plated grating 100mm dia of weight not less than 50gm for floor trap / Nahani trap etc complete all as specified.

GOVIND CONSTRUCTION (BID ID -3347805)

M/s Ranaji Construction Co (BID ID -3348656)

Tulsi Enterprises (BID ID -3356318)

abhinav and company (BID ID -3348514)

K P BUILDERS (BID ID -3348466)

m/s meetu enterprises (BID ID -3348394)