Repair to OTM Accn Through Day to Day complaints of BR M and EM Nature under AGE BR P2 and AGE EM at Faridkot Mil Stn

Amount

S&F in repairs spindle brass for 15 mm dia CP Bib cock/ pillar cock/mixer/ concealed cock of any pattern complete all as specified and directed .

Cleaning and removing all scale and dirt, etc. from over head water tanks of capacity upto 1000 litres and from mouths of circulating pipes complete all as specified and directed .

S&F in repair PVC waste pipe of dia 32 to 40 mm for WHB/Sink up to floor trap and fixed complete all as specified and directed.

S&F in repair bib taps, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for 15mm bore of iron pipe or for brass ferrule and fixed complete all as specified and directed .

S&F in repair bib tap 15mm of PTMT screwed down for iron pipe and fixed complete all as specified and directed .

S&F in repairs 15 mm bore Pillar taps, cast copper alloy, chromium plated with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed .

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 Ltr capacity. triple layered,hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut screwed for 20mm bore iron pipe complete all as specified and directed .

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 1000 Ltr capacity. triple layered,hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut screwed for 20mm bore iron pipe complete all as specified and directed .

S&F in repair rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 2000 Ltr capacity. triple layered,hoisted and fixed in position including PTMT float valves, high pressure, with polythene ball & float and fly nut screwed for 20mm bore iron pipe complete all as specified and directed .

S&F in repair brass chromium plated towel rail 20mm dia, D type, 600mm long between flanges fixed with CP brass screws including wooden/plastic beads complete all as specified and directed.

S&F in repair 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, fixed to walls including fixing clamps with nut and bolts complete all as specified and directed .

S&Fin repair 110mm bore PVC (SWR) bends/shoe any radius fixed to walls including distance pieces and stack clamps complete all as specified and directed .

S&F in repair 15mm dia, brass chromium plated wall mixer for mixing hot & cold water, screwed down for iron pipe complete all as specified and directed .

S&F in repair covers for PVC overhead water tanks of any capacity (as per sample) complete all as specified and directed .

S&F in repair Wash hand basin,vitreous china (white), flat back, 550mmx400mm with cantilever aluminium alloy brackets embedded in concrete block including Brass chromium plated waste coupling 32mm bore, PVC Waste pipe 32mm bore, complete all as specified and directed .

S&F in repair waste fittings 32/40 mm brass, chromium plated, for glazed ware sinks, basins etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed .

S&F in repair PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed

S&F in repair plastic water closet seat , white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed complete all as specified and directed .

S&F in repair angle cock/ stop cock with flange, cast copper alloy, chormium plated, fancy type, screwed both ends for 15mm bore of iron pipe or for union and fixed complete all as specified and directed .

S&F in repair sinks with drainage board, made of 1mm thick stainless steel,overall size of sink 915mm x 460mm with bowl size 410mm x 330mm x 160mm with plugs, washers, waste pipe, union, waste coupling and cantilever brackets embedded in cement and sand mortar in wall complete all as specified and directed .

S & F in repairs brass chromium plated overhead shower 125mm size with or without swivel joints including fixing to steel pipe of 15mm bore complete all as specified and directed .

S&F in repair 20 mm bore PTMT ball valve, high pressure with epoxy coated aluminium rod and high density plastic ball, screwed for iron pipe and fixed in position complete all as specified and directed .

S&F in repair PVC Syphon (as per sample) for PVC low level flushing cistern of capacity 10 ltr omplete all as specified and directed .

Taking up or down 15mm bore steel water tubing alongwith connections in any situation for refixing or removal complete all as specified and directed .

Taking up or down 20mm bore steel water tubing alongwith connections in any situation for refixing or removal complete all as specified and directed .

M&L for Steel water tubing of 15 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .

All as per Ser item No 26 here-in-before but except pipe.

M&L for Steel water tubing of 20 mm bore, medium grade, galvanised with all fittings, laid in trenches/ fixed to wall etc complete all as specified and directed .

All as per Ser item No 28 here-in-before but except pipe.

S&F in repair 20mm bore stop valve, cast copper alloy with handle, screwed both ends for GI out let/ inlet pipe or for union including threading to existing pipes on both ends complete all as specified and directed .

S&F in repair 15mm dia stop cock ,cast copper alloy, chromium plated, concealed type with long shank with crutch or butterfly handle, screwed down high pressure, screwed both ends for iron pipe complete all as specified & directed .

S&F in repair brass chromium plated sink mixer / Centre hole Basin Mixer, swan neck type for mixing of hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed .

S&F in repair PVC flushing cistern of capacity 10 litre , valve less, syphonic action type, low level, white/ coloured with inlet ball valve, float and handle including brackets complete all as specified and directed .

S&F in repair vitreous China squatting pan, Orissa pattern, size 580 x 440mm, white, with integral foot rest,cast iron 'P' or 'S' trap of size 100mm & PVC flush pipe of 32mm dia including provision of lime concrete bedding and connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floors complete all as specified and directed .

S&F in repairs vitreous china wash down water closet pan, padestel pattern, white including connecting pipe to union of flushing cistern complete all as specified and directed .

S&F in repairs PVC Jet spray with 1.50 m flexible tube for wash down water closet (pedestal pattern) and fixed complete all as specified and directed .

S&F in repair chromium plated brass health faucet with 1.0mtr tube & hook (braided tube) complete all as specified and directed .

S&F in repair PVC Knob/Handle (as per sample) for 10 ltr capacity PVC low level flushing cistern complete all as specified and directed .

S&F in repairs Cast iron floor trap, long neck, 75 mm dia with stainless steel grating including jointing to waste pipe, fixed in cement concrete type B1, 1:2:4 complete all as specified and directed .

S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed .

S&F in repair Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed .

S&F in repair PVC Corner cabinet of two door (2D), white colour, fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed

S&F in repair corner glass shelf of size 30cm with Chromium plated bracket guard and railing fixed with and including screws and wooden/plastic cleats complete all as specified and directed .

S&F in repair PTMT cabinet with mirror of size 330x430mm complete all as specified & directed . Make : Prayag Cat No. 551 or equivalent in polytuf / Pearl/ Shakti as approved by GE

S&F in repair round / square grating of PTMT of size 100mm (minimum weight 50gms). Jointed to PVC pipe complete all as specified & directed .

M&L in repair 3 mm thick, plain sheet glass, ordinary quality and glazing with oil putty or with wooden beads in squares n.exc 0.5 Sqm in each pane complete all as specified and directed .

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tined tacks or galvanized wire staples or wooden bead complete all as specified and directed .

S&F in repair 3mm thick, figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed .

S&F in repair Mild Steel powder coated Decorative drapery rod (colour as approved) of 20 mm dia , approved pattern and design including decorative knobs (wall side and free side) & powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs/grips complete all as specified and directed .

S&F in repair 140mm size (Overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring,fixed in floor complete all as specified and directed .

S&F in repair 100mm long butt hinges, medium weight, cold rolled, mild steel (ISI marked) fixed with screws complete all as specified and directed .

S&F in repair 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixng clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified & directed .

S&F in repair 150 mm long aluminium handles, cast type, anodised complete all as specified and directed .

S&F in repair aluminium anodised barrel tower bolts of extruded section, 200mm long complete all as specified and directed .

S&F in repair aluminium (Die cast) body door closer, hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80kg and fixed complete all as specified and directed .

S&F double action floor spring, hydraulically regulated, made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made out of mild steel heavy duty & fixed complete all as specified and directed .

M&L for Resecuring or easing and adjusting without taking down of shutter of any description wooden/aluminium ,exc 1 sqm and not exc 2 sqm each complete all as specified and directed .

Dismantling of unframed timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 Sqcm in section, in any position complete all as specified and directed

M&L for 2nd class soft wood plain fillets ,exc 13 Sqcm and not exc 25 Sqcm sectional area,square, rectangular or triangular in section, clean swan, secured with nails or brads ,put together with glue pinned at joints complete all as specified and directed.

S&F in repair 30mm thick block board, grade 2 quality, interior grade, commercial type fixed with screws to timber frame work including 6mm thick teak wood lipping fixed with nails complete all as specified & directed .

M&L for 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with nails to frame-work in any position complete all as specified and directed

M&L for preparation of new or previously untreated wood or wooden based surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for welding in repairs n exc 2.5 cm in length in metal of thickness n. exc 6mm complete all as specified and directed .

Resecuring or easing and adjusting without taking down aluminium door/window shutter of any description by tightening and provn of fastners, hinges, rubber gasket, beading and clips etc (where required) to make the door/window functional complete all as specified and directed .

Taking down aluminium door/window shutter of any description and refixing the same by tightening and provn of fastners, hinges, rubber gasket, beading and clips and floor/hydraulic door closer etc (where required) to make the door/window functional complete all as specified and directed .

S&F in repair brass mortice lock, vertical type, size 100mm mortice latch with four levers including escutcheon plates and two keys complete all as specifie and directed.

S&F in repair continous piano hinges, mild steel, bright finish or electrogalvanised ,30mm width, fixed with screws complete all as specified and directed .

S&F in repair 100 mm long hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed

S&F in repair 300mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed .

S&F in repair cast iron or mild steel peg set, 175mm to 250mm with hook fixed with wall complete all as specified and directed .

Dismantling terrazzo/ glazed tiles as in floor/ skirting/ dado including cement mortar bedding ( but not backing ) complete all as specified and directed .

S & F Non skid ceramic coloured tiles (as approved) 7 to 8 mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc, set and jointed in neat cement slurry & pointed in white or coloured cement with pigment to match the colour of tiles over & including 15 mm thick screed in cement mortar 1:4 complete all as specified and directed .

S&F Glazed ceramic coloured tiles 450mmx300mmx7 mm thick as in vertical surfaces such as skirting/dados etc, set and jointed in neat cement slurry & pointed in white or coloured cement with pigment to match the colour of tiles over & including 15mm thick rendering in cement mortar 1:4 complete all as specified and directed .

M&L for Vitrified ceramic tiles, (colour & shade as approved), 8 to 9 mm thick (square/ rectangular), polished,area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15 mm thick screed in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed.

S&F 8 to 9 mm thick ,vitrified ceramic,(coloured & shade as approved) tiles of size, n.exceeding 0.36 Sqm as in vertical surfaces such as skirting / dado etc, set and jointed in neat cement slurry over & including 10 mm thick rendering in cement mortar 1:4 and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed .

Taking down chowkats or frames n.exc 1.5 Sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed.

Taking down chowkats or frames exc 1.5 sqm but n. exc 4 sqm each with shutters (without taking of shutters from the frames) complete all as specified and directed

Taking down shutter of any description exc 1 sqm but n.exc 2 sqm each complete all as specified and directed

S&F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed.

S&F Pressed steel frames of size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc.complete all as specified and directed

M&L for PCC 1:3:6, type C0 (using 12.5mm graded crushed stone aggregates) as in back filling of pressed steel frames, bed blocks, fixing of hold fasts etc including necessary formwork complete all as specified and directed

S&F 30 mm thick 2nd class hard wood, plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edges) or of vaneered partical board medium desnsity, wood partical board with commercial face veneers fitted to chowkats complete all as specified and directed

S&F 30 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed

S&F in repair galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete all as specified and directed .

S&F Solid wood moulded grain printed PVC door frame of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with M.S. square tube, egdes will be painted to match printed sheets complete all as specified and directed .

S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Woodgrain moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as specified and directed

S&F 100mm mild steel butt hinges, medium weight,cold rolled complete all as specified and directed.

S&F aluminium anodised barrel tower bolts,150 mm long of extruded section, fixed to doors with screws complete all as specified and directed .

S&F Aluminium anodised, cast type, handle 150 mm size complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt of length 250mm with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolt and sliding bolts of extuded sections or cast aluminium alloy and fixed complete all as specified and directed .

S&F wire netting of stainless steel wire 1.23mm dia,size of mesh 20mm, fixed with tinned tacks of stainless steel wire staples complete all as specified and directed .

Taking down carefully existing aluminium/copper point wiring for light, fan, socket or power bell complete with fittings such as Switches, sockets, ceiling roses, holders, call bells & making good the disturbed surfaces of walls, matching the colour with existing surface complete all as specified and directed. Note : Rate for making good shall be deemed to be included in above item rate.

Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable(ISI marked) 1100 volts grade FRLS with multistranded copper conductor, drawn through concealed / surface in wall / roof/ceiling surface and its accessories on the surface etc in the existing concealed conduit with new provision of 2mm thick galvanised steel pressed sunken terminal boxes of suitable sizes for mounting of switches, sockets, fan regulator etc, covered with 2.8mm thick plastic laminate Hylem / Anchor top cover sheet of required colour, fixed with brass screws and cup washers, painting terminal boxes inside and outside with one coat of red oxide primer including continuous earth wire of size 1.5 Sqmm PVC stranded copper conductor unsheathed, insulated, stranded (Green colour) connected to common earth point dolly for for one light point/fan point/call bell point, 230 volts controlled by one switch complete all as specified and directed .

All as per Ser item No 94 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on same board with other switches complete all as specified and directed .

All as per Ser item No 94 here-in-before but for switch socket combination 5 Amp 5 Pin socket outlet 230 volts on independent board complete all as specified and directed .

All as per Srl item No. 94 here-in-before but for one ligh point controlled by two,two way switches complete all as specified and directed

All as per Srl item No. 94 here-in-before for Switch socket combination (multi purpose) 6 Pin 15 Amps 230 volts point to be controlled by one switch and wiring with 2.5 Sqmm FRLS PVC unsheathed copper conductor and FRLS cable 2.5 Sqmm PVC insulated earth wire on independent board.complete all as specified and directed

S&F PVC Lamp holder suitable for LED 5 to 20 watt bulb complete all as specified and directed .

S&F complete set of tube light fitting, 1x20 watt LED (4 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F complete set of tube light fitting, 1x10 watt LED (2 feet long), 230 volt, decorative ultra slim linear LED lighting fixture with environment friendly, energy efficient ready to use pack etc with all acessories such as LED adopter, LED tube, internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed.

S&F ceiling rose, three terminals, PVC polycarbonate, isolated body with bakalite 20mm back plate complete all as specified and directed .

S&F in repair Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 10 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 10 Sqmm for continous earth wire drawn into existing PVC concealed conduit complete all as specified and directed . Note :- Two runs of 10 Sqmm copper cable and one run of 10 sqmm copper wire earth continuty conductor shall be measured as one length)

S&F in repair Sub main wiring with two runs of single core PVC FRLS sheathed, insulated, copper cable of 6 Sqmm size, multi stranded, 1100 volts grade with PVC insulated FRLS copper wire 6 Sqmm for continous earth wire drawn into existing PVC concealed conduit complete all as specified and directed . Note :- Two runs of 6 Sqmm copper cable and one run of 6 sqmm copper wire earth continuty conductor shall be measured as one length)

S&F switch piano, flush type, single pole, one way, 5 /6 Amp,230 V,AC supply complete all as specified and directed .

S&F switch piano, flush type, single pole, one way, 15/16 Amps, 230 volts AC supply complete all as specified and directed.

S&F Piano type switch, single pole, 2 way, 5/6 amps, 230 volt, AC supply complete all as specified and directed

S&F socket outlet, two in one, 5 Pin 5 Amps, 230 Volt, AC supply, complete all as specified and directed

S&F socket outlet ,2 in 1, 5/6 pin, 15/16 Amps, 230 volts ,AC supply complete all as specified & directed.

S&F bell push, flush type, 5 amps complete all as specified and directed

S&F Bell, ding dong, AC 230V, single pole complete all as specified and directed

S&F in repair Sheet metal enclosure for DBs,SPN, double door, 230 Volts,8 ways with 200 amps rated bus bar complete all as specified and directed .

S&F in repair MCCB, 4 Pole,fixed type ,415 V, 100 Amps with breaking capacity 16 KA including making good the disturbed surfaces complete all as specified and directed.

S&F in repair MCB SP 5 to 32 Amp, 240 volts, B Curve with breaking capacity 10 KA complete all as specified and directed

S&F in repair MCB SP 40 Amp, 240 volts, B Curve with breaking capacity 10 KA complete all as specified and directed

S&F in repair MCB SPN 40 to 63 Amp, 240 volts, C Series with breaking capacity 10 KA complete all as specified and directed

S&F in replacement Sheet Metal single pole and neutral Enclosures with a two pin and earth plug and socket with MCB SP 20 Amps suitable for working on 240 volts AC complete all as specified & directed.

S&F in replacement stepped type electronic fan regulator, flush type on the existing pheonolic laminated sheet etc, single phase, AC supply, 230 V and connecting up complete all as specified and directed .

S&F in replacement Modular switch 1 way 16 amps, 1 module complete all as specified and directed.

S&F in replacement Modular socket 6A /16A - 2/3 pin combined, 2 module complete all as specified and directed.

S&F in replacement Modular switch 1 way 6 amps, one module complete all as specified and directed.

S&F in replacement Modular switch 2 way 6 amps, two module complete all as specified and directed.

S&F in replacement Modular bell push 6 amps, one module complete all as specified and directed.

S&F in replacement Modular socket 6A -2/3 pin combined, 2 module complete all as specified and directed.

S&F in replacement modular metal flush box 1/2/3 modules including making good to disturbed area duly matching the colour with existing surface complete all as specified and directed.

S&F in replacement modular metal flush box 4 modules including making good to disturbed area duly matching the colour with existing surface complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 1 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 2 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 3 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 4 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 6 module complete all as specified and directed.

S&F in replacement Modular white cover plate with frame, 8 module complete all as specified and directed.

S&F in replacement condenser 2.5/3.15 Mfd AC 240V, complete all as specified and directed.

S&F in replacement PVC non metallic rigid conduit, 25 mm external dia (medium grade) ISI marked exclusive of boxes but inclusive of all tees, bends, reducer, bell mouth tube ends and fixing accessories, concealed including cutting chases in wall, floor and making good all disturbed surfaces matching with existing surfaces complete all as specified and directed.

S&F in replacement hylam sheet suitable size with cutting slot for mounting of switches,sockets,fan regulators including nuts,washer,thimble etc with 3mm thick plastic laminated sheet cover and making good all disturbed surfaces matching with existing surfaces complete all as specified and directed.

S&F in repair 1X10 watt LED retrofit type bulk head fitting luminaries, die cast, aluminium alloy body, heat resistant, prismatic glass cover with specially designed gasket, lamp holder etc complete with all accessories and including connecting up with twin core twisted flexible copper coductor cable with suitable size of 230 volt,50 HZ complete all as specified and directed.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 75mmx75mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 100mmx100mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 150mmx100mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

M&L for Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6.00mm thick, buried directly in ground vertically (depth of pit not less than 2.25m below normal ground level), with top edge of the plate not less than 1.5m below normal ground level, earth plate surrounded by 15cm thick and packed alternate layers of charcoal dust and common salt, connected with and including earth lead of GI wire 4mm dia (8SWG) by means of bolts, nuts, check nuts and washers of galvanized iron or thimbles and other end of the earth wire connected to electrical equipment/GOD/LA and protected by galvanized iron pipe light grade 15mm dia bore including watering pipe 20mm dia bore GI medium grade (ISI marked) with funnel and wire mesh, including all necessary excavation and earth work, PCC chamber in plain cement concrete (1:3:6) type C-1 and pit cover of precast RCC with MS frame etc and all as shown in electrical plate No 3 of MES Schedule Part-I (2009), complete all as specified and directed. Note(s):- (i) RCC pit cover shall be pre-cast of RCC (1:2:4) type B-1, 80mm thick reinforced with TMT bar 8mm dia both ways @100c/c. (ii) PCC chamber shall be constructed 500 mm away from the edge of earth pit. (iii) Rate shall include earth lead and protection pipe of length 7.5m, excess beyond 7.5m length required at site shall be measured and paid separately. (iv) Earth resistance should be less than 3Ohm. In case the test results are not found below 3Ohm, complete earthing will be redone without any extra cost to Govt. (v) Quoted lump sum / rate shall be inclusive of above all provisions.

S&F in replacement of MS sunken box 1.6mm thick galvanised steel pressed sunken terminal boxes of size 150mmx150mm and 60 mm deep with 3mm thick plastic laminated sheet cover , painted on both sides inside and outside with one coat of red oxide primer for mounting of switches sockets, fan regulators, etc. including making good to the disturbed surfaces of walls with matching the colour with existing surfaces complete all as specified & directed.

Supply and fixing of 2x2 LED light fiting 34 w to 42w, (600mmx600mmx70mm), 230 V, ceiling mounted, pluto panel (surface) LED flate panel for surface mounting which provides soft-light and glare free symmetrical illumination, connections up with copper conductor wire with suitable size complete all as per specification and directed.

S&F in repair energy efficient LED Security light fitting of 25W, pressure die cast aluminium housing/body, heat resistant clear toughened glass, better optics for uniform distribution street/ roadway luminaire, with driver including electric connection, complete fitting with all accessories on and including bracket of 40mm dia,light grade ,GI pipe ,1.20 m and connecting with twin core twisted flexible copper conductor cable 1.5 Sqmm and with following specifications complete all as specified and directed :- (a) Lumen system efficacy of luminaire should be minimum 100 Lumen per watt. (b) Input Voltage range : 140 to 270 volts (c) Temp operating range : Minus 10°C to Plus 50°C (d) Power factor : Minimum 0.95 (e) THD : Max15%. (f) IP rating : IP66. (g) IK rating : Minimum IK07 (h) Built in potted LED Driver of the same make as of the luminaire. (j) LED driver should be complete with all protections viz open/short circuit protection, over voltage protection, all as per standard design of manufacturer. (k) Surge protection 10 kV (inbuilt + extended) (l) CCT : 5700 K. (m) CRI : Morethan 80 (n) Lens - High Efficiency wide angle lens. (o) BIS Approved fixtures and driver (p) Rated life time : 50000 burning hrs (Average 10 to 12Hrs Note :- A Sum of Rs. 1,72,930.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 29 & 30 (Schedule of credit) of Tender Documents.

NAV DURGA CONSTRUCTION CO

SHIV SHAKTI BUILDERS

NEW AMRITSAR CONSTRUCTION COMPANY

AABIA CONSTRUCTION

BANSAL BUILDERS