REPAIR TO ALL TYPE OF WOODEN FURNITURE AT AIR FORCE STATION JAISALMER

Amount

Repair to Chair Dining (Drg No: FD-228, 270, 279 & 285) : M&L for removing of old broken components of chair dinning and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in the drawing.

Rear leg as specified in the drawing.

Stiffener as specified in the drawing.

Front/Side/Rear rails of seat including drilling of holes for caning as specified in drawing

Back support as specified in the drawing.

Hard PVC shoe with screw & washer complete all as specified.

Plywood 6 mm thick BWR grade as per Drg No. FD-285

Repair to Chair Writing (Drg No. FD-280)M&L for removing of old broken components of chair writing and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front leg as specified in the drawing.

Rear leg as specified in the drawing.

Stiffener as specified in the drawing.

Front/back/side rail as specified in the drawing.

Arms as specified in the drawing.

Back support as specified in the drawing.

Hard PVC shoe with screw & washer complete all as specified.

Repair to Chair Easy (Drg No. : FD-229)M&L for removing of old broken components of chair easy and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Front/Rear leg as specified in the drawing.

Seat frame as specified in the drawing.

Frant/back/Side rail as specified in the drawing.

Arms as specified in the drawing.

Back frame/support as specified in the drawing.

Hard PVC shoe with screw & washer complete all as specified.

Repair to Chair Dining Officer (Drg No: FD/Map-II/04 & FD/E6/MAP-10)Removing of old U/S part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge:-

Front leg as specified in the drawing.

Rear leg as specified in the drawing.

Stiffener as specified in the drawing.

Front/back/side rail as specified in the drawing.

Plywood 12mm thick commercial BWR grade ply as specified in the drawing.

Back support as specified in the drawing.

Hard PVC shoe with screw & washer complete all as specified.

New cushion 75mm thick 40 density duly stiched cover of approved colour and quality

TABLE PEG (Drg No: FD-277 & 384)Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engineer-in-Charge.

Leg as specified in the drawing.

Front rail as specified in the drawing.

Side stiffeners as specified in the drawing.

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

PVC Shoes (4 nos in one peg table will be counted as one unit)

TABLE CENTRE (Drg No: FD-267, 274 & 393)M&L for removing of old broken components of table centre and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Front/Rear rail as specified in the drawing.

Side rail as specified in the drawing.

Side Stiffener as specified in the drawing.

Long Stiffener as specified in the drawing.

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

PVC Shoes (4 nos in one table will be counted as one unit)

TEA POY WOODEN (Drg No: FD-278 & 382)M&L for removing of old broken components of tea poy and S&F new components made out of 1st class hard wood teak without crack and knots of similar size, shape, plained and fixed with teak wood pinning and fevicol as under:-

Leg as specified in the drawing.

Side rail as specified in the drawing.

Front/back rail as specified in the drawing.

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

PVC Shoes (4 nos in one table will be counted as one unit)

TABLE 900X600X760MM WITH DRAWERS (Drg No: FD-283 & 284)Removing of old U/S part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in drg and directed by Engr-in-charge.

Leg as specified in the drawing.

Front/Rear rail as specified in the drawing.

Side rail as specified in the drawing.

Middle stiffeners as specified in the drawing.

Side stiffeners as specified in the drawing.

Bottom ply of drawers (commercial ply woods of size 550mm x 310mm x 6mm) as specified in the drawing.

Side members of drawer as specified in the drawing.

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

Knob decorative of size 40mm complete all as specified in the drawing.

TABLE DINNING 4/6/8 PERSONS (Drg No: FD-269, 273 & FD/Map-II/03)Removing of u/s part and S&F new part made out of 1st class hard wood (Teak wood) duly shaped as per drg including tightening the joints by pinning, screwing, nailing, glueing and placing every part intact all as specified in Drg and directed by Engr-in-charge.

Front/back rail of table dining 4 person as specified in the drg

Front/back rail of table dining 6 person as specified in the drg

Front/back rail of table dining 8 person as specified in the drg

Side rail as specified in the drawing.

Leg as specified in the drawing.

‘L’ type bracket of size 75mm x 75mm x 20mm fixed with screws.

TABLE WRITING (Drg No: FD-249 & 275)Removing of unserviceable part of furniture and supply and fixing new part to match with existing parts to make it serviceable complete all as specified and directed and shown in drawings.

Leg as specified in the drawing.

Front/ back rail as specified in the drawing.

Side box with front door and drawer made of 17/18mm thick prelaminated particle board as specified in drg

Back ply box 6mm thick commercial ply

Front door 18mm pre-laminated particle board including knob and hinges piano type continuous.

Recanning description: M&L Re-canning with plastic cane of ½ round 2.0mm wide & 0.40mm thick, woven in Godrej pattern and border around and back with 4mm wide of approved quality (white/cream in colour) including removing of old unserviceable canning as specified.

Chair dining as specified in the drawing (FD-228, 262, 270 & 279).

Chair writing as specified in the drawing (FD-280).

Chair easy seat & back as specified in the drawing (FD-201 & 229).

SOFA SET 3/4/5 PERS/SEATERS WOODEN (Drg No: FD-373 & 281)

M&L for taking out old unserviceable seat or back and S&F new seat or back of foam cushion of size 530x560x100mm 32-density duly covered with marking cloth and tapestry cloth of approved quality duly stiched complete all as specified in drawing and directed by Engr-in-charge. Note : Cost of Tapestry cloth shall not be less than Rs. 200/-per meter.

M&L for taking out old unserviceable front legs and S&F new legs of size 530x70x35mm thick made of 1st class hard wood (teak), free from knots and cracks with permissible moisture content and of shape size as existing complete all as specified in drawing and directed by Engr-in-charge.

Rear leg as shown in drawing.

Arm as shown in drawing.

Side rail as shown in drawing.

Front rail of sofa set, three seater, as shown in drawing.

Front rail of sofa set, single seater, as shown in drawing.

Wooden battens/support, as shown in drawing.

Wooden bearer/back frame support for sofa set of three seater, as shown in drawing.

Wooden bearer/back frame support of sofa set, single seater, as shown in drawing.

TABLE BED SIDE (Drg No: FD-248 & 276) Removing of unserviceable part of furniture and supply and fixing new part to match with existing parts to make it serviceable complete all as specified and directed and shown in drawings.

Top/middle/bottom shelf with polished beading as specified in drawing.

Sides pane including legs with polished beading edges as specified in the drawing.

Back ply 6 mm thick commercial as specified in the drawing.

SIDE BOARD ( Drg No : FD-241, 371 & 372) Removing of unserviceable part of furniture and supply and fixing new part to match with existing parts to make it serviceable complete all as specified and directed and shown in drawings.

Back ply 6mm thick commercial as specified in the drawing.

Shutter fixed with piano type hinges continuous 20mm as specified in the drawing.

Knobs 50mm of chromium plated of approved and standard quality as specified in the drawing.

Stainless Steel handle 100mm with the help of screw and washer as per sample

Top base as specified in the drawing.

Bottom base as specified in the drawing.

Sides pane as specified in the drawing.

Repair to Bed ply top (Drg No: FD-246 & 247)

M&L for taking down old unserviceable ply from bed ply top and S&F new bed ply 12mm thick 1980x900mm size (BWR) grade type 'B' complete all as specified and shown in drawings.

M&L for taking down old unserviceable long rails of bed ply top and S&F new long rail of size 1980x90x35mm of 1st class seasoned teak wood free from knots and cracks with permissible moisture content complete all as specified and as shown in drawings.

Short rail of size 900x60x60mm size complete all as specified and as shown in drawings.

Stiffener of size 900x60x40mm size complete all as specified and as shown in drawings

Foot rest assembly alongwith legs as per existing size and as shown in drawings.

Head rest assembly alongwith legs as per existing size and as shown in drawings.

TABLE DRESSING LADIES WITH MIRROR (Drg No: FD-251, 378 & FD/E6/MAP/16) Removing of unserviceable part of furniture and supply and fixing new part to match with existing parts to make it serviceable complete all as specified and directed and shown in drawings.

S&F new SS handle 100mm with screw and washer as specified in drg

Removing existing U/S bottom box of table dressing ladies and S/F new box with drawers as specified in Drawing.

Removing existing U/S mirror with ply of table dressing ladies and S/F new mirror 5.5mm thick of clear vision (Make : Modiguard/ Saint Gobin) with 6mm thick ply fixed at back and legs of mirror frame as specified in Drawing.

TABLE DRESSING GENTS WITH MIRROR (Drg No: FD-230 & 379) Removing of old unserviceable part of furniture and supply and fixing new part to match with existing parts to make it serviceable complete all as specified and directed by Engineer-in-Charge.

Back ply of box as specified in the drawing.

Knobs 50mm of chromium plated and standard quality as specified in the drawing.

Removing existing U/S bottom box of table dressing gents and S/F new box with drawers as specified in Drawing.

Removing existing U/S mirror with ply and S/F new mirror 5.5 mm thick of clear vision with 6mm ply on back and legs of mirror frame as per drg

S&F 'L' Shape MS steel frame made of 3mm angle of size 250 mm x 250mm on the base of Table dressing gents cabinet with the help of wooden screws completea all as directed by Engineer-in-Charge. (Drawing No. FD-230,379, FD/E6/MAP/14)

HAT STAND WITH MIRROR (FD-233/362)

M&L for taking down old unserviceable frame and S&F new frame of size 710x1000mm with 4mm thick teak face ply in front side and shall be covered with 4mm thick commercial ply on back side including 35x6mm thick beading all around & 2 Nos hanging hooks complete all as specified and as shown in drawings.

M&L for taking down old unserviceable mirror and teak wood beading and S&F new mirror of size 300x440x5mm and teak wood beading 10x12mm provided all around and shall be fixed on right hand side complete all as shown in drawings.

M&L for taking down old unserviceable metal pegs and S&F new Aluminum peg of size 75x120mm of best quality complete as specified in drawings and directed by Engineer-in-charge.

Polishing description: M&L preparation of wooden surfaces by cleaning, scrapping through electric grinder, applying putty for filling and smoothening the surfaces with sand paper and applying French polish to get the glossy finish on the wooden part of furniture. Minor repair of tightening with fevicol/bamboo pins/ screws/nails shall be done before polishing furniture as specified.

Chair Dining (FD-228, 262, 270, 279 & 285)

Chair writing (FD-280)

Chair Easy (FD-201 & 229)

Table Peg (FD-277 & 384)

Table Centre (FD-274, 267 & 393)

Teapoy wooden (FD-278 & 382)

Table 3'x2' with drawer (FD-283)

Table 3'x2' without drawer (FD-284)

Table dining 4’ x 3’ (FD/MAP-II/03)

Table dining 6 person (FD-269, 273 & FD/MAP-II/03)

Table dining 8 person (FD-273 & FD/MAP-II/03)

Table writing (FD-249 & 275)

Sofa set 5 seater (FD-281, 373 & FD/MAP-II/02)

Sofa single seater (FD-281, 373 & FD/MAP-II/02)

Table 3x3 wooden (FD-88 & 291)

Bed with plytop (FD-246 & 247)

Table dressing (Ladies) (FD-251, 378 & FD/E6/MAP/16)

Table dressing gents (FD-230, 379 & FD/E6/MAP/14)

Hat Stand with Mirror (FD-233/362)

Replacement of TOP: Taking out unserviceable top from Table and S&F new top made out of 18mm thick MDF board with both side laminated sheet including 4mm thick teak wood edging around the top duly polished all as directed. Top of table shall be of size as per drg.

Table Peg (FD-277 & 384)

Table Centre (FD-274, 267 & 393)

Teapoy wooden (FD-278 & 382)

Table 3'x2' with or without drawer (FD-283 & 284)

Table dining 4’ x 3’ (FD/MAP-II/03)

Table dining 6 person (FD-269, 273 & FD/MAP-II/03)

Table dining 8 person (FD-273 & FD/MAP-II/03)

Table writing (FD-249 & 275)

Table 3x3 wooden (FD-88 & 291)

Sofa Set 5 Seater (TP)

M&L for taking down old unserviceable leatheritte/upholstry seat, back and S&F new leatheritte/upholstry seat, back with foam cushion of 32-density and spring/straps of approved quality and colour, fully covered, duly stiched including glossy finished polish on exposed wooden portion of sofa set complete all as specified and directed by Engr-in-Charge.

Sofa Single Seater (TP)

M&L for taking down old unserviceable leatheritte/upholstry from complete sofa set and S&F new leatheritte/upholstry of approved quality along with foam cushion of 32-density and spring/straps fully covered duly stiched including glossy finished polish on exposed wooden portion of sofa set complete all as specified and directed by Engineer-in-Charge.

Table Centre glass top (TP)

M&L for taking out old broken glass top and S&F new 4'x2'x10mm thick toughened glass with 25mm tinted edging including glossy finished polish on exposed wooden portion of table all as specified in drg and directed by Engr-in-charge.

Vinayak Distributors

PRAFUL ENTERPRISES

SNEH CORPORATION