REPAIR MAINTENANCE OF REFRIGERATION AND AIR CONDITIONING INSTALLATION AND REPAIR MAINTENANCE OF COOLING APPLIANCES SUCH AS REFRIGERATOR, AC, WATER COOLER ETC UNDER GE (N) MUMBAI

Amount

Supply and fix in repairs sealed compressor suitable for 6.5 Ton Window/Split type AC and making all necessary connection with suction, discharge and charging pipe line with gas welding, including initial testing complete all as specified and as directed by Engineer-in-Charge. Make : Kirloskar/Techmech/Aircon/Usha/Sriram or equivalent. Note : (a) Gas charging shall be measured and paid separately. (b) Replacement of compressor unit shall be carried out from authorized dealers of original manufacturer's only.

Supplying, fixing and testing of fan motor for condenser capacity 6.5 Ton including taking down of old fan blade and removing complete all as specified and as directed by Engineer-in-Charge

Supplying, fixing and testing of condenser fan blade of capacity 6.5 Ton including taking down of old fan motor and removing complete all as specified and as directed by Engineer-in-Charge

Supplying and fixing in repairs thermostat expansion valve for Air Conditioner of 6.5 Ton capacity complete all as specified and as directed by Engineer-in-Charge. Make : Renutral, Denfos or equivalent.

Supply and fix in repairs thermostat for Air Conditioner of 6.5 Ton capacity complete all as specified and as directed by Engineer-in-Charge. Make : Renutral, Denfos or equivalent.

Material and labour for earthing complete with Galvanised steel earth plate electrode 60cm X 60cm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of earth the plate not less than 1.5 metres below normal ground level, connected to plate with GI earth wire 32 x 6mm GI earth strip, 7.5m long from earth point to test point and other end connected to control board / panel / equipment, laid under floors/plinths or fixed on walls or concealed in wall etc by means of bolts, nuts, check nuts and washers made out of galvanized iron or steel with provision of charcoal & common salt not less than 50Kg, in each earthing packed up to maximum 30 cm on both side of plate and GI strip protected by 40mm bore light grade galvanized iron pipe complete all as shown in electrical plate No. 3 of MES schedule Part I, 2009 with PCC 1:3:6, type C1 in chamber wall with CI cover and frame, watering pipe of size 20mm dia medium grade, 0.63mm thick GI sheet funnel with wire mesh and engraving of earth marking on nearby structure/ building with cement mortar 1:4 plate of size 200mm x 150mm x 15mm thick including necessary excavation and earth work in any type of soil/strata & testing complete all as specified and as directed by Engineer-in-Charge. Note :- (i) Contractor should submit test report of earthing after installation to Engineer -in-Charge

Supply and fix in repairs solenoid valve for Air Conditioner of 6.5 Ton capacity complete all as specified and as directed by Engineer-in-Charge. Make : Renutral, Denfos or equivalent.

Supply, fix and testing of fan motor for cooling unit capacity 6.5 Ton AC including taking down of old fan motor and removing complete all as specified and as directed by Engineer-in-Charge

Supply, fix and testing of fan blade for cooling unit capacity 6.5 Ton AC including taking down of old fan blade and removing complete all as specified and as directed by Engineer-in-Charge

Material and labour for gas charging R-404A in AC 6.5 Ton capacity of any make and type, including pressure leakage testing, vacuuming, rectification, testing and commissioning including suitable size copper tubing complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs copper condenser coil assembly for 6.5 Ton AC of any type and any make, including testing and commissioning complete all as specified and directed by Engineer-in-Charge. Note : Gas charging shall be measured and paid separately

Supply and fix in repairs evaporator coil assembly for 6.5 Ton AC of any type and any make, including testing and commissioning complete all as specified and directed by Engineer-in-Charge. Note : Gas charging shall be measured and paid separately

Supply and fix in repairs outdoor unit contactor for Air Conditioner of 6.5 Ton capacity including testing and commissioning complete all as specified and as directed by Engineer-in-Charge. Make : Voltas/ Carrier/LG.

Supply and fix in repairs temperature display with pannel for 6.5 Ton AC of any type and any make, including testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs coil heater for 6.5 Ton AC of any type and any make, including testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Material and labour for taking down air conditioner of any type/make/ of 6.5 Ton capacity after dismantling all electric connection from site (either in ground / any floor), transporting to work site, cleaning the condenser, brush cleaning the whole unit with electric blower, cleaning with water, decaling with acid on both side of cooling coil and components, refixing the covers and making electrical connections, installation the machine in same position, testing and commissioning complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of invertor electric writing kit (PCB) for indoor unit suitable for 6.5 Ton window / split type AC complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of invertor electric writing kit (PCB) for outdoor unit suitable for 6.5 Ton window / split type AC complete all as specified and as directed by Engineer-in-Charge.

Material and labour for shifting of spilt type AC of 6.5 Ton capacity and any make, after dismantling of all electrical connection and carrying it to the new location, refixing it after making suitable size hole in wall, making electrical connections, installation testing, commissioning and making good the disturbed surface to match with the existing surfaces complete all as specified and as directed by Engineer-in-Charge

Supply and fix 4 core PVC insulated and unsheathed, unarmoured, multistranded, copper conductor cable of size 1.5 Sqmm, 1100 Volts grade for AC connection etc complete all as specified and as directed by Engineer-in-Charge. Make- Plaza, Finolex, Havells, Polycab

Supply and fix in repairs sealed compressor suitable for Water cooler of capacity 40/80 litres, making all necessary connection with suction, discharge and charging pipe line with gas welding, including initial testing complete all as specified and as directed by Engineer-in-Charge. Make : Kirloskar/Techmech/Aircon/Usha/Sriram Note : (a) Gas charging shall be measured and paid separately. (b) Replacement of compressor unit shall be carried out by original company's authorized dealer only.

Material and labour for gas charging R-134 A in water cooler of capacity 40/80 ltrs including pressure leakage testing, vacuuming, rectification, testing of entire unit and commissioning including provision of suitable size copper tubing complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs indoor blower suitable for 1.5 Ton /2.0 Ton capacity, split type Air conditioners, any make including testing and commissioning complete all as specified and as directed.

Supply and fix in repairs single pole and neutral enclosure with a three pin & earth plug with socket complete with one single pole MCB 20 to 30 Amps, 240Volts, 'C series, 50 Hz , breaking capacity 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :Legrand / L&T / Havells/Benlo

Supply and fix in repairs MCCBs 100 Amps, 16 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo

Supply and fix in repairs MCCBs 125 Amps, 16 KA, 4 pole, 415 Volts with adjustable thermal and adjustable magnetic settings with extended copper terminals complete all as specified and as directed by Engineer-in-Charge. Make : Larsen &Toubro/ ABB/ Siemens/ Schneider/ Havells/ Legrand/ Indo ASIAN/ C & S Electric/ BhartiaCuttler Hammer (BCH)/Benlo

Material and labour for submain wiring complete with and including 2 runs of 6.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit/Casing capping/concealed, heavy duty of suitable size including accessories etc as required and fixed on walls and 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 6.0sqmm PVC insulated cable and one run of 4.0sqmm cable and one run of PVC conduit/ casing capping shall be measured as one unit length. Make of Cable-Plaza, Finolex, Havells, Polycab Make of PVC conduit/Casing Capping-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

Supply and fix in repairs of motor suitable for 1.5 Ton/2.0 Ton spilt type AC, any make with speed of 8500 RPM, 230 V including testing and commissioning complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED luminaire for clean room 600mm x 600 mm, 48 watt, 220 V AC recessed type with UGR 22 diffuser, corrosion resistant powder coated CRCA housing with hingeable stainless steel front cover frame, white LEDs connected in parallel series and with driver for constant current output, voltage range 150-265 V AC detachable gear tray which accomodates the holders and the gear for ease of maintenance, suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size, efficiency 100 Im output/W, ceiling thickness 50 mm, sealed dual compartment construction for better heat management and ingression protection retention, non hygroscopic XLPE gasket with interlocking system to ensure fool proof dust/particle protection with acrylic cover complete all as specified and as directed by Engineer-in-Charge. including taking down existing light fittings etc complete all as specified and as directed by Engineer-in-Charge. Make : Phillips/Havells / Crompton Greaves.

Supply & Fix Terminal HEPA (High efficiency particulate air) filters (H-14) suitable to remove 99 97% of dust pollen, mold, bacteria and any airborne particles with a size of 0.3 microns with box of size 450 x 450 x 250 mm complete all as specified and as directed by Engr-in-charge.

Supply and fix in repairs sealed compressor suitable for 1.5 Ton Window/Split type AC and making all necessary connection with suction, discharge and charging pipe line with gas welding, including initial testing complete all as specified and as directed by Engineer-in-Charge. Make : Kirloskar/Techmech/Aircon/Usha/Sriram or equivalent. Note : (a) Gas charging shall be measured and paid separately. (b) Replacement of compressor unit shall be carried out from authorized dealers of original manufacturer's only.

Supply and fix in repairs sealed compressor suitable for 2 Ton Window/Split type AC and making all necessary connection with suction, discharge and charging pipe line with gas welding, including initial testing complete all as specified and as directed by Engineer-in-Charge. Make : Kirloskar/Techmech/Aircon/Usha/Sriram or equivalent. Note : (a) Gas charging shall be measured and paid separately. (b) Replacement of compressor unit shall be carried out from authorized dealers of original manufacturer's only.

Supply and fix in repairs running capacitor 36 MFD, 3 Pole & 2 Pole suitable for 1.5 Ton window / split type air conditioner all as specified and as directed by Engineer-in-Charge. Make : Asian/Unister/Apcos/Electro.

All as per item No. 33 described here-in-before but capacitor 45 MFD for 2 ton window / split type air conditioner

Supply and fix in repairs starting capacitor, 80 to 100 MFD suitable for 1.5 Ton window / split type air conditioner complete all as specified and as directed by Engineer-in-Charge. Make : Asian/Unister/Apcos/Electro

All as per item No. 35 described here-in-before but capacitor 100 to 150 MFD for 2.0 Ton window / split type air conditioner

Supply & Fix in repair starting relay with new starting relay suitable for 1.5/2 TR air conditioner complete all as specified and directed by Engr-in-charge.

Supply & Fix in repair thermostat control switch for window/ split type Air Conditioner of 1.5 Ton /2.0 TR cap coimplete all as specified and directed by Engr-in-charge. Make : Renutral, Denfos or equivelent.

Material and labour for gas charging R-32/ R-410A in window/ split type AC 1.5 Ton capacity of any make and type, including pressure leakage testing, vacuuming, rectification, testing and commissioning including suitable size copper tubing complete all as specified and directed by Engineer-in-Charge.

Material and labour for gas charging R-32/ R-410A in window/ split type AC 2 Ton capacity of any make and type, including pressure leakage testing, vacuuming, rectification, testing and commissioning including suitable size copper tubing complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs copper condenser coil assembly for 1.5 Ton AC of any type and any make, including testing and commissioning complete all as specified and directed by Engineer-in-Charge. Note : Gas charging shall be measured and paid separately

Supply and fix in repairs copper condenser coil assembly for 2.0 Ton of any type and any make, including testing and commissioning complete all as specified and directed by Engineer-in-Charge. Note : Gas charging shall be measured and paid separately

Material and labour for taking down window type / split type air conditioner of any type/make/capacity after dismantling all electric connection from site (either in ground / any floor), transporting to work site, cleaning the condenser, brush cleaning the whole unit with electric blower, cleaning with water, descaling with acid on both side of cooling coil and components, refixing the covers and making electrical connections, installation the machine in same position, testing and commissioning complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of invertor electric writing kit (PCB) for indoor unit suitable for 1.5 Ton / 2.0 Ton window / split type AC complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of invertor electric writing kit (PCB) for outdoor unit suitable for 1.5 Ton / 2.0 Ton window / split type AC complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Mild Steel bracket (heavy duty), duly powder coated paint, suitable for outdoor unit of split AC 1.5/2.0 ton capacity including 8 Nos anchor bolt 12mm dia x 80mm long complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs defective front cover grill with new front cover grill suitable for window type air conditioner of capacity 1.0 Ton/1.5 Ton/2.0 Ton complete all as specified and as directed.

Supplying, fixing and testing of fan blade of motor for window / split type AC of capacity 1.0 Ton / 1.5 Ton / 2.0 Ton including taking down of old fan blade and removing complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs blower fan motor for 1.0 Ton / 1.5 Ton /2.0 Ton capacity, window / split type Air conditioners including testing, complete all as specified and as directed.

Supply and fix in repairs blower drum, suitable for window type AC 1.0 Ton/1.5 Ton/2.0 Ton complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs blower drum, suitable for split type AC 1.0 Ton/1.5 Ton/2.0 Ton complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs capacitor 4 MFD for window type air conditioner of capacity 1.0 Ton/1.5 Ton/2.0 Ton complete all as specified and as directed.

Supply and fix in repairs capacitor 6 MFD for window type air conditioner of capacity 1.0 Ton/1.5 Ton/2.0 Ton complete all as specified and as directed.

Material and labour for shifting of window type/spilt type AC of any capacity and make, after dismantling of all electrical connection and carrying it to the new location, refixing it after making suitable size hole in wall, making electrical connections, installation testing, commissioning and making good the disturbed surface to match with the existing surfaces complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs of swing motor suitable for window/ spilt type AC complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs starting capacitor 40 MFD for water cooler complete all as specified and as directed by Engineer-in-Charge. Make : Asian/Unistar/Tibcon/Telsa

Supply and fix in repairs running capacitor 10 MFD for water cooler complete all as specified and as directed by Engineer-in-Charge. Make : Asian/Unistar/Tibcon/Telsa

Supply and fix in repairs thermostatic control switch for water cooler complete all as specified and as directed by Engineer-in-Charge. Make : Renutral/Ind foss/Annapurna (AES)

Supply and fix in repairs condenser fan motor 1/35 HP, 230 volts, AC, single phase suitable for water cooler all as specified and as directed by Engineer-in-Charge. Make : AUE / Flare Master or equivalent

Supply and fix in repairs relay for water cooler of suitable capacity all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs push cock/ lifting cock of 15mm dia cast copper alloy,chromium plated suitable for water cooler, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of water tray stainless steel of 40/80 litre capacity all as specified and as directed by Engineer-in-Charge.

Supply and fix in replacement of rubber packing and hinges of top cover of any water cooler of any make and capacity all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 15 mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 142 gms) Make :Prayag or equivalent as approved by GE.

Supply and fix as in repair over load protector for water cooler of any capacity complete all as per specified and as directed.

Material and labour for preparation of old painted steel surfaces of water cooler by complete scraping and applying one coat of synthetic enamel paint by spraying on outer surface as per existing colour and black on bottom frame etc for the 40/80 litre capacity water coolers etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix and testing of fan blade of motor for water cooler any type and size including taking down of old fan blade and removing, complete all as specified and directed

Supply and fix in repairs sealed compressor suitable for Refrigerator 275 to 285 litre capacity and making all necessary connection with suction, discharge and charging pipe line with gas welding, including initial testing complete all as specified and as directed by Engineer-in-Charge. Make : Kirloskar/Techmech/Aircon/Usha/Sriram or equivalent. Note : (a) Gas charging shall be measured and paid separately. (b) Replacement of compressor unit shall be carried out from authorized dealers of original manufacturer's only.

All as per item No. 68 described here-in-before but for 300 to 310 litre capacity

All as per item No. 68 described here-in-before but for 90/165/175 litre capacity

All as per item No. 68 described here-in-before but for 360 litre capacity

Material and labour for gas charging R-134A / R-600 in Refrigerator of 275 to 285 litre capacity including pressure testing leakage, Vacuuming, rectification, testing and commissioning including suitable size copper tubing complete all as specified and as directed by Engineer-in-Charge

All as per item No. 72 described here-in-before but for 300 to 310 litre capacity

All as per item No.72 described here-in-before but for 90/165/175 litre capacity

All as per item No. 72 described here-in-before but for 360 litre capacity

Material and labour for gas charging R-134A / R-600 in Refrigerator of 360 litre capacity including pressure testing leakage, Vacuuming, rectification, testing and commissioning including suitable size copper tubing complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs thermostat control switch for refrigerator of any capacity, complete all as specified and as directed by Engineer-in-Charge. Make : Renutral, Sriram/Kalvinator/Godrej/Kirloskar

Supply and fix in repairs overload protector suitable for high / low speed for refrigerator any capacity complete all as specified and as directed by Engineer-in-Charge Make : Renutral, Sriram/Kalvinator/Godrej/Kirloskar

Taking out old unserviceable magnetic gasket and supply and fix new magnetic gasket for refrigerator of 165/175/286/300/310 litres capacity all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs relay for refrigerator of 165/ 175/ 286/ 300/310 litres capacity all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs relay for refrigerator of 360 litres capacity all as specified and as directed by Engineer-in-Charge.

Supply and fix as in repairs timer for refrigerator of 360 litres capacity all as specified and as directed by Engineer-in-Charge.

Supply and fix as in repairs timer for refrigerator of 165/ 175/286/ 300/ 310 litres capacity all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs of chiller door for refrigerator all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs of chiller tray for refrigerator all as specified and as directed by Engineer-in-Charge.

Supply and fix copper pipe for 1.5 ton capacity AC, 1/2" , 50mm with all accessories etc complete all as specified and as directed by Engineer-in-Charge. Make: Godrej

Supply and fix copper pipe for 1.5 ton capacity AC, 1/4" OD, 6.35mm and ID 5.09mm, 50mm plumbing pipe( Copper) with all accessories etc complete all as specified and as directed by Engineer-in-Charge. Make: Godrej

Supply and fix 3 core PVC insulated and unsheathed, unarmoured, multistranded, copper conductor cable of size 4.00Sqmm, single core, 1100 Volts grade for AC connection etc complete all as specified and as directed by Engineer-in-Charge. Make- Plaza, Finolex, Havells, Polycab

Supply and fix in repairs single pole and neutral enclosure with a three pin & earth plug with socket complete with one single pole MCB 20 to 30 Amps, 240Volts, 'C series, 50 Hz , breaking capacity 10 KA complete all as specified and as directed by Engineer-in-Charge. Make :Legrand / L&T / Havells/Benlo

Supply and fix in repairs MCB SP 6-32 Amps, 240 volts, 10KA 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make :Legrand / L&T / Havells/Benlo

Material and labour for submain wiring complete with and including 2 runs of 4.0sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit, heavy duty of suitable size including accessories etc as required and fixed on walls and 4.0sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing submain wiring complete all as specified and as directed by Engineer-in-Charge. Note : Two runs of 4.0sqmm PVC insulated cable and one run of 4.0sqmm cable and one run of PVC conduit shall be measured as one unit length. Make of Cable-Plaza, Finolex, Havells, Polycab Make of PVC conduit-Anchor, Modi, Pressfit, Precision, Astral, Panasonic Anchor, Polycab, Presto Plast, Supreme

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 52,716.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

industrial suppliers (BID ID -3274232)

Chaudhary Enterprises (BID ID -3279890)