REPAIR TO INTERNAL/EXTERNAL PERIODICAL SERVICES JOINERY PLUMBING FLOORING AND OTHER MISC WORK IN OTM ACCN OF 505 ABW UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Demolition of reinforced cement concrete reinforcement cut as required to facilatate demolition of any description and in any position not otherwise specially provided complete all as specified and as directed.

Demolition of plain cement concrete unreinforced of any thickness of any description and in any position not specifically provided for complete all as specified and as directed.

Complete removal of existing treatment & levelling of wall surface using mechanical/electrical operated sanding/scraping machine within-built vaccum suction system to suck the existing treatment as retrieved by scrapping/sanding etc complete all as specified and directed.

M&L for applying 3mm thick water proofing wall care putty including washing, rubbing and cleaning after executing of ser item No above complete all as specified and directed by Engr-in-Charge. Note : Washing to be carried out using high pressure washer machine to make the wall surface dust free before applying wall care putty.

M&L for two coats of oil bound distemper over prepared surface of wall using auto-roller and airless paint sprayer complete all as specified and dircted.

Complete removal of exteranal existing treatment & levelling of wall surface using mechanical / electrical operated sanding / scraping machine within-built vaccum suction system to suck the existing treatment as retrieved by scrapping/sanding etc complete all as specified and directed.

M&L for two coats of cement base paint over prepared surface of wall using auto-roller and airless paint sprayer complete all as specified and dircted.

M&L for writing letters or figures block, roman, Italic or indian n exc. 30cm height on existing surface complete all as specified and as directed.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick joint free 395mm x 395mm as in floors over and including 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement including dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises all as specified and directed.

All as per the desription of srl item No 09 above but in vertical surface as skirting, dado and risers to steps over and including 10mm thick rendering/backing coat in cement mortar 1:4 all as specified and directed.

M&L for non skid ceramic coloured tiles 7mm to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors over and including 15mm thick screed bed in cement mortar 1:6 set and jointed in neat cement slurry and pointed in coloured cement. including dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L glazed ceramic coloured tiles in vertical surface area of each tile 0.07 to 0.18 sqm each set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including rendering 10mm thick in CM 1:4 and finished rough, complete including dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L 3D exterior designer coloured matt finished wall tiles 300mm x 600mm design as approved over 10mm thick rough finished rendering in cement mortar 1:4 including taking down cement plaster and removal from site complete all as specified and as directed.

M&L for double charged vitrified coloured tiles shade as approved 10mm thick square/rectangular polished, area of each tiles exceeding 0.36 sqm but not exceeding 1.0 sqm, as in floors, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including screed bed or bedding layers of mortars 15mm thick in CM 1:6, including dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises all as specified and directed. all as specified and directed

All as per the description of srl item No 14 above but as in vertical surfaces such as skirting/ dado over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

M&L for 75mm thick type-D-2 1:4:8 using 40mm graded crushed stone aggregate as in sub base to receive stone slab and pavement complete all as specified and as directed.

M&L 20mm to 25mm thick pre-polished machine cut kota stone slab as in flooring over and including 15mm thick screed bed in cement mortar 1:6, laid over cement slurry @ 3 Kg/sqm and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge of slab complete all as specified and as directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L 20mm to 25mm thick pre-polished machine cut kota stone slab as in riser or vertical surface over and including 10mm thick rendering in cement mortar 1:4, and jointed with grey cement slurry mixed with pigment to match with shade of slab including molding the edge where as specified and as directed. Note:- The size of Kota stone slab shall not less than 550mm x 550mm cut size as in flooring and full length single piece in steps, except the location where the balance portion remain less than size as specified above.

M&L for old size brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work complete all as specified and as directed.

Taking down existing cement plaster or complete removal of existing pointing and finishes including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick ready mix plaster make ultratech readiplast/ birla aerocon RMP/ ACC suraksha RMP on brick work on concrete surface of wall internal surfaces finished even and smooth all as specified and directed by GE.

M&L 15mm thick ready mix plaster make ultratech readiplast/ birla aerocon RMP/ ACC suraksha RMP on brick work on concrete surface of wall external surfaces finished even and smooth all as specified and directed by GE.

M&L 5mm thick ready mix plaster make ultratech readiplast/ birla aerocon RMP/ ACC suraksha RMP on ceilling surfaces finished even and smooth all as specified and directed by GE.

M&L for preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparing old decorated plastered surfaces of ceiling and applying two coats of white washcomplete all as specified and as directed.

M&L for preparing new plastered surfaces of wall and applying two coats of oil bound distemper white or tinted over and including a coat of 2mm wall care putty and chalk whiting on plastered surfaces preparatory to distempering complete all as specified and as directed.

M&L for complete removal of existing treatment and preparing old decorated surfaces of wall and applying two coats of oil bound distemper over a coat of 1mm wall care putty.

M&L for preparation of new plastered surfaces of wall and applying two coat of cement based paint over a coat of cement primer complete all as specified and as directed.

M&L for complete removal of existing treatment of wall including cornices etc. by washing, rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade working height up to 15 meter complete all as specified and directed.

M&L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete all as specified and as directed.

M&L applying two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth over a coat of red oxide primer including preparation of steel surfaces complete all as specified and as directed.

M&L for two coats of synthetic enamel paint on old steel painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or grith orking height up to 15 Mtrs complete all as specified and directed.

M&L for two coats of synthetic enamel paint on old wooden painted surfaces including preparation of surfaces of any description not otherwise descriped over 10cm width or grith complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not other wise provided complete all as specified and as directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and as directed.

S&F steel water tubes, medium grade, ISI marked, galvanised, 20mm bore with all fittings, fixed to walls and ceiling or laid in floors including taking up or down steel tubing and connections complete all as specified and as directed.

Refixing only old 15mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, , reducer, etc as required including taking up or down steel tubing and connections complete. .

Refixing only old 20mm dia bore steel water tubing & connection in new or old position fixed to wall, ceiling or laid in floors including necessary cutting & making of new threads for fixing of new fittings such as elbows, tees, sockets, union, reducer, etc as required including taking up or down steel tubing and connections complete all as specified and as directed.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floor 75mm bore including demolition / taking down PVC/CI drain/rain water pipe complete all as specified and as directed.

S&F in repair health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.50 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S&F in repair 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement concrete 1:2:4 type B-1 using 20mm graded curshed stone aggregate mix with WPC complete all as specified and as directed.

S&F in repair bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and as directed.

M&L granite 18-20mm thick colour as approved of any type work table rubbed and polished in steps, jambs, pillars, window cills, cooking platforms or making hole for fix in oveal shape for fixing of wash hand basin and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shed of granite over 15mm thick screed bed in cement mortar 1:6 including moulding and polishing the edges complete all as specified and as directed.

M&L granite 18-20mm thick colour as approved of any type work table rubbed and polished in for wall lining veneering to wall 12mm thick in cement mortar 1:3 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shed of granite including moulding and polishing the edges etc complete all as specified and as directed.

S&F in repair table top wash basin white, flat bottom size 525mm x 415mm x 140mm of make jaguar cat Part No JSD-WHT-25907N or equvalent excluding tap, chain, plug but including brackets, waste fitting 32mm dia brass chromium plated push type coupling with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair brass chrome polished comfort height single-control operation allows hot and cold or mix both make - kohler cat part No - 29928IN-4

S&F in repair chrome polished brasss urinal spreader 15mm inlet with fixing stud from cera cat part no F8070201 with necessary fixing arrangement complete all as specified and as directed.

S&F in repair CP stainless seel connection pipe 600mm long pemimum qualilty for gyser, urianal, WHB etc complete all as specified and as directed.

S&F in repair CP bottal trap, plug type with wall flange Make - kohler cat part No K-9033-CP complete all as specified and as directed.

S&F in repair vitreous china urinals bowl, half stall flat back large of size white with grating and union for discharge pipe complete including waste coupling provide and fixing plugs bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement including Urinal spreader complete all as specified.

S&F in repairs brass CP mixer/wall mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore including connection pipe and fittings complete all as specified and as directed.

S&F in repairs vitreous china squatting pan, ‘orissa’ pattern, of size 580mm x 440mm white with integral foot rest complete including trap and plain cement concrete bedding, outgoing flushing pipe, anti syphonage pipe etc complete all as specified and as directed.

S&F in repairs chromium plated brass angle valve concelled type for 15mm bore pipe, fixed in repairs complete all as specified and directed.

Taking down chowkhats or frames n.exc 1.50 sqm with shutters without taking off shutters from the frames complete all as specified and as directed.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters without taking off shutters from the frames complete all as specified and as directed.

Taking down door shutters of any description exc 1 sqm & n.exc 2 sqm each complete all as specified and directed

S&F factory made single extruded WPC (wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45mm x 70mm comprising of virgin PVC polymer of K value 58-60 suspension grade, calcium carbonate and natural fibres wood powder/ rice husk/ wheat husk and non toxic additives maximum toxicity index of 12 for 100 gms fabricated with meter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steeel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face) & 1100 N (edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/stainless steel dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or stainless steel dash fasteners shall be paid for separately. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

S&F providing and fixing factory made single extruded WPC (wood polymer composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 suspension grade, calcium carbonate and natural fibres wood powder/ rice husk/wheat husk and non toxic additives maximum toxicity index of 12 for 100 gms having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (face) & 900 N (edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, all as per direction of Engineer In- Charge. Note:- Stainless steel butt hinges and necessary stainless steel screws shall be paid separately complete all as specified and directed.

S&F factory made double rebated extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/ chowkat of size 65mm x 125mm comprising of virgin PVC polymer of K value 50-60 suspension grade, calcium carbonate and natural fibers wood powder/ rice husk/ wheat husk and non toxic additives max toxicityindex of 12 for 100 gms fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed stainless steel screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (face & 1100 N edge), min compressive strength of 58N/sqmm and resistance to flame of class A category with property of being termite/ borer proof, water/ moisture proof and fire retardant and fixed with MS holdfast/ lugs/stainless steel dash fasteners of required dia and length complete as per direction of Engr in charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

Providing 30mm thick factory-made wire mesh solid WPC door shutter consisting of density 650 Kg /cbm manufactured by an ISO-9001-2015 certified company, door to be panneled with stainless steel mosquito mesh and XTN aluminium mesh for additional strength and safety purpose. conforming as per IS:4020. The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. stainless steel butt hinges size 100mm x 25mm x 2mm and 32mm long steel screws drilled suitable to pass through other hardwares should be fixed with 19 x 6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer's specification & drawings.” Note:- Fixture/fittings shall be measured & paid under relevant item except meshes.

S&F aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mm x 114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mm x 65mm. (iii) Welded shutter 02 Nos of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm stainless steel 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm stainless steel 202 grade round bar. (v) Welded wiremesh shutter 2 Nos of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of stainless steel wire mesh, stainless steel 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.

S&F aluminium window as per TD drg No. CEDZ/TD-316 with following specifications :- (i) Outer frame of size 40mm x 114mm with 1.3mm thickness, corner 45 degree cut & aluminium welded. (ii) Center mullion of size 40mm x 65mm. (iii) Welded shutter 02 Nos of size 40mm x 60mm x 1.3mm thickness 45 degree cut mechanically joint with 6mm allen key bolt clamp with 5mm clear glass both side EPDM rubber gasket metal body hand lever type single point lock, aluminium kobra hinges 2 Nos per shutter. (iv) 12mm SS 202 grade round bar safety grill at 100mm cc distance modified to 150mm cc distance in front of handle, welded at both ends with 6mm stainless steeel 202 grade round bar. (v) Welded wiremesh shutter 2 Nos of size 40mm x 18mm x 1.3mm thickness 45 degree cut with 0.45mm nominal dia of stainless steel wire mesh, stainlee steel 75mm long hinges & PVC magnet. (vi) Entire window shall be powder coated with pure polyster coat of any shade as approved by GE. (vii) Window shall have provision for installation of window AC/desert cooler and provision of window glass shutter, wiremesh, grill and necessary fittings and locking arrangements for subject portion will be modified as per ground requirement during the execution as per directions of Engr-in-charge. (viii) Window shall be installed with silicone complete all as specified and directed by Engr-in-charge.

S&F flush shutters 30mm thick, solid core construction, with block board core and ply wood face panels, commercial type on both sides with leaping and beading complete all as specified and as directed.

Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, door frame etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, ladders, railings and similar work complete all as specified and as directed.

S&F mild steel, plain, black sheet of 1.60mm thick in wall cladding steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up mitred angles etc as required complete all as specified and as directed.

Taking down/dismantling old particle board or any board kitchen cabinet with wardrobe including fillets and making good disturbed surfaces all assessary complete all as specified.

S&F factory made 18mm thick 100% solid WPC ( wood polymer composite ) plain board of required size comprising of virgin PVC resin of K value 57-60 suspension grade, calcium carbonate and natural fibers (wood powders/ rice husk/ wheat husk) and Non toxic additives, made froms extrusion process WPC foam sheet single extruded inner with density not less than 650 kg/cbm certified company, having good screw holding capacity screw withdrawal strength of 2000 N (face) & 1100 N (edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being termite/ borer free. water/ moisture proof, fire retardant and fixing with stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws. All as per direction of Engineer -In-Charge, material test certificate and authentication should be compulsory provided by the manufacturing company: For WC/bathroom/toilet/kitchen & wabinets.

S&F factory made 18mm thick 100% solid WPC (wood polymer composite ) laminated board of required size comprising of virgin PVC resin of K value 57-60 suspension grade, calcium carbonate and natural fibers wood powders/ rice husk/ wheat husk and Non toxic additives, made from extrusion process WPC foam sheet. single extruded inner with having minimum density not less than 650 kg/cbm having good screw holding capacity screw withdrawal strength of 2000 N (face) & 1100 N (edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category with property of being termite/ borer free. water/ moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless screws. All as per direction of Engineer -In-Charge, material test certificate and authentication should be compulsory provided by the manufacturing company: For WC/Bathroom/Toilet/Kitchen and Cabinets.

S&F magnetic catches with steel body ‘H’ type, fixed to shutter complete all as specified and as directed.

S& F continuous piano hinges of width 30mm when open flap, mild steel, bright finish or electrogalvanised complete all as specified and as directed.

S&F 100mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 4 levers brass cupboard locks grade-I, size 65mm complete all as specified and as directed.

S&F 150mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F butt hinges, 100mm size medium weight, cold rolled mild steel complete all as specified and as directed.

S&F aluminium handles 150mm size cast type, anodised complete all as specified and as directed.

S&F 300mm aluminium alloy, anodised sliding door bolt with hasp, staple bolt type and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and as directed.

S&F stainless steel cromium plated tubing of 25mm dia curtain rod fancy type including fancy type CP brabs brackets wall to wall or flush to wall with finials or end caps decorative type as approved by GE for securing to curtain rod to wall in position, fixed in repair complete all as specified and as directed.

M&L for 40mm thick plain cement concrete type B-1, 1:2:4 20mm graded curshed stone aggregate as in floors and finishing cement concrete surface even and smooth with using extra cement complete all as specified and as directed.

M&L cement concrete type C-1, 1:3:6 using 20mm graded curshed stone aggregate as in plinth protection and paving 75mm thick laid in slope finished even and fair without using extra cement including making joints at every 2.5m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight including necessary form work and complete all as specified.

Dismantling of floor of size not exceeding 1.50 sqm mtr for water closet/bath and removing out the cinder/concrete from sunken portion, grinding any sharp edges etc all as specified and directed with following:- (a) Cleaning of RCC surface to remove dust, loose particle etc with compressed air or any other particles or any other suitable techniques on site conditions etc. (b) M&L for a glass fibre reinforced acrylic modified cementitious coating system with base coat of sika top & seal-107 @ 1.50 Kg/sqm glass fibre reinforcement Sika® Fab-I and top coat with sika top® Seal-107 @ 1.50 Kg/sqm or equivalent of fosroc or pidilite. (c) M&L for protection plaster 15mm thick on cement mortar 1:3 admixed with appropriate integral water proofing compound with sika ® plastocrete plus as specified. (d) M&L for providing 40mm dia GI pipe spout projecting at least 150mm beyond outer face of wall. (e) M&L for sunken portion filled with 40mm graded brick bats and finished with 50mm thick PCC 1:2:4 type B1 all as specified and directed. (f) The area of each WC portion is n.exc 1.50 sqm each. (g) Cost of the above aspect shall be deemed to be included in the quoted rates of the respective item and nothing extra shall be paid on this account. (h) 72 hrs ponding test shall be carried out for sunken treatment before payment.

M&L WPC acoustic wall panelling of approved colour for indoor/outdoor wall 100% nontoxic, non feraldelyers, water proof, termite proof, anti-UV using necessary stainless steel clip/fixing arrangement including corner patti or moulded beading or corners of same materials including dismantling of pannels complete all as specified and as directed.

Providing and fixing 4mm thick aluminium composite panel (ACP) exterior grade 0.5mm PVDF coated aluminium skin on top & bottom plus 3mm thick polyethylene core on/all-round RCC/Brick column/ wall/ fascia's/ M.S. section/ aluminium section structure/ dead walls/under side sky light upto all height in required colour/pattern & panel size as area of panel shall not more than 0.60sqm as per drawing fixed on aluminium extruded standard tubular section of size 38mm x 25mm x 1.6mm of approved make jindal/ hindalco/ indalco conforming to IS;733 and IS; 1285, fixed at 600m center to center with rawl plugs and screws or with fixing clips or with expansion hold fasteners aluminium sections shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle CP brass/stainless steel screws, with 12mm wide x 20mm deep groove in joints or panels including filling the joints with weather silicon sealant of dow coming 789 or equivalent of approved colour inacp ACP, weather sealant structural sealant/adhesive tape, masking tap, primer/ gasket/ foam/ scaffolding/ cluding 10mm dia backer rod, The rate shall include cost of ACP panel, subframe of aluminium section for fixing of ACP, weather sealant structural sealant/adhesive tape, masking tape primer/ gasket/ foam/ scaffolding/ aluminium cleats with screws complete including making openings as required at site like electical fittings, recess for pipe etc, all necessary tools and plants, scaffolding and as per manufacturer's technical specifications, including dismantling of old sheet complete and as per the direction of the Engr-in-Charge surface area of aluminium composite panel shall be measured for payment.

M&L for preparation of new or old plastered surfaces of wall and applying two or more coat of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, alkali & fungal resistance, dirt resistance exterior paint of required shade company depot tinted with silicon additives @ 1.43 litre/10 sm over and including priming coat of exterior primer applied @ 0.90 litre/10 Sqm over new surface.

Providing & fixing false ceiling with semi perforated 12mm thick micro tegular edged at all heights with GRG glass fibre reinforced gypsum false ceiling tiles of size 595mm x 595mm of approved texture, design and pattern having moisture content less than 2% , humidity resistance of 99% ,NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 475 (part-4)-1970 and light code Description unit rate No. 429 SUB HEAD : 26.0 new technologies and materil reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanised iron section of 0.33mm thick galvanised @ 120 gms per sqm including both sides comprising of main-T runners of size 15mm x 32mm of length 3000mm, gross-T of size 15mm x 32mm of length 1200 mm and secondary intermediate cross-T of size 15 x 32 of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items galvanising @ 80 gms per sqm i.e. 50mm long , 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shaped level adjuster of size 85mm x 25mm x 2mm. Galvanised iron perimeter wall angle of size 24mm x 24mm x 0.40mm of length 3000mm to be fxed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws . the work shall be carried out as per specification, drawing and as per direction of the Engr-in-charge.

S&F in repair with complete installation of wind operator turbo air ventilator of size 600mm dia made of stainless steel sheet including dual ball bearing fixed over assembly made of polycarbonate transparant sheet of size 5.5 x 3.5 feet on roof of steel structure shed working height up to 15 meter all as specified and directed

Supply only steel wheel sutaible for sliding steel door shutters on top or bottom rail including bush or ball bearing and all consumable items for making operational complete all as specified and as directed.

S&F steel rolling shutters, gear operated type with bevel gear box and crank handle without ball bearing as specified including top covers anchoring rod, hasp & staple and one shop coat of red oxide primer and errected in position including taking down complete thickness of laths 1.25mm complete all as specified and directed.

S&F safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

S&M steel helical wire spring 45cm long , 75mm dia and weighting of each spring not less than 3.00 kg complete all as specified and directed

S&F for ball bearing for rolling shutters make as approved complete all as specified and as directed.

The new hut furnitures (BID ID -3427956)

Rohan Construction Company (BID ID -3422475)