For fixing of rate contract for repairs to different types of damaged pumps and motors installed at various WSSs of District Ganerbal, Budgam and Srinagar

Amount

Repairs to 3-Phase 5HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 7.5HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 10HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 12HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 15HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 17.5HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 20HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 25HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 30HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 40HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 45HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 50HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 60HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 75HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to 3-Phase 100HP Horizontal Motor by of dismantling of the horizontal motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scrap shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged fans as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Horizontal motor as per sample.

Repairs to Horizontal Pump having discharge from and above 3000GPH and below 10000GPH Dismantling of the Horizontal Pumping unit at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items: -

Fabrication, providing and fitting of GM wear ring (Machined/Finished) as per sample.

Fabrication, providing and fitting of GM bush (Machined/Finished) as per sample

Fabrication providing and fitting of Split type MS gland (Machined/Finished)

Remetalling of Wear ring seats, then finishing to size for proper fitment of wear ring

Remetalling of bearing seats, and finishing to size for proper fitment of bearings

Remetalling of Pump shaft and finishing to size for proper fitment of bearings

Fabrication providing and fitting of Pump shaft (Machined/Finished) out of SS-410 material, as per sample.

Providing and fitting of metallic Palmative packing

Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample

Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

Fabrication, providing and fitting of SS impellers as per sample after extraction of the damaged ones.

Fabrication, providing and fitting of Bronze impellers as per sample after extraction of the damaged ones.

Repairs to Horizontal Pump having discharge from and above 10000GPH and below 30000GPH Dismantling of the Horizontal Pumping unit at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items: -

Fabrication, providing and fitting of GM wear ring (Machined/Finished) as per sample.

Fabrication, providing and fitting of GM bush (Machined/Finished) as per sample

Fabrication providing and fitting of Split type MS gland (Machined/Finished)

Remetalling of Wear ring seats, then finishing to size for proper fitment of wear ring

Remetalling of bearing seats, and finishing to size for proper fitment of bearings

Remetalling of Pump shaft and finishing to size for proper fitment of bearings

Fabrication providing and fitting of Pump shaft (Machined/Finished) out of SS-410 material, as per sample.

Providing and fitting of metallic Palmative packing

Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample

Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

Fabrication, providing and fitting of SS impellers as per sample after extraction of the damaged ones.

Fabrication, providing and fitting of Bronze impellers as per sample after extraction of the damaged ones.

Repairs to Horizontal Pump having discharge from and above 30000GPH and below 50000GPH Dismantling of the Horizontal Pumping unit at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items: -

Fabrication, providing and fitting of GM wear ring (Machined/Finished) as per sample.

Fabrication, providing and fitting of GM bush (Machined/Finished) as per sample

Fabrication providing and fitting of Split type MS gland (Machined/Finished)

Remetalling of Wear ring seats, then finishing to size for proper fitment of wear ring

Remetalling of bearing seats, and finishing to size for proper fitment of bearings

Remetalling of Pump shaft and finishing to size for proper fitment of bearings

Fabrication providing and fitting of Pump shaft (Machined/Finished) out of SS-410 material, as per sample.

Providing and fitting of metallic Palmative packing

Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample

Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

Fabrication, providing and fitting of SS impellers as per sample after extraction of the damaged ones.

Fabrication, providing and fitting of Bronze impellers as per sample after extraction of the damaged ones.

Repairs to Horizontal Pump having discharge from and above 50000GPH and below 90000GPH Dismantling of the Horizontal Pumping unit at site, shifting to the workshop in a private load carrier arranged by the firm, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items: -

Fabrication, providing and fitting of GM wear ring (Machined/Finished) as per sample.

Fabrication, providing and fitting of GM bush (Machined/Finished) as per sample

Fabrication providing and fitting of Split type MS gland (Machined/Finished)

Remetalling of Wear ring seats, then finishing to size for proper fitment of wear ring

Remetalling of bearing seats, and finishing to size for proper fitment of bearings

Remetalling of Pump shaft and finishing to size for proper fitment of bearings

Fabrication providing and fitting of Pump shaft (Machined/Finished) out of SS-410 material, as per sample.

Providing and fitting of metallic Palmative packing

Providing and fitting of rubber seal for air tight fitting of split parts of the pump as per sample

Fabrication and fitting of Coupling key/Cotter (Machined/Finished) as per sample

Fabrication, providing and fitting of SS impellers as per sample after extraction of the damaged ones.

Fabrication, providing and fitting of Bronze impellers as per sample after extraction of the damaged ones.

Replacement of MS Hub TC-series rubber tyre motor couplings ( complete assembly) of following sizes:-

Providing and fitting of rubber tyre part only to TC couplings of following sizes

Providing of metallic rope/gland packing of following thickness

Repairs to 3-Phase 25HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged Bearing Housing as per sample.

Replacement of damaged fan as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Vertical motor as per sample.

Repairs to 3-Phase 30HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged Bearing Housing as per sample.

Replacement of damaged fan as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Vertical motor as per sample.

Repairs to 3-Phase 40HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged Bearing Housing as per sample.

Replacement of damaged fan as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Vertical motor as per sample.

Repairs to 3-Phase 45HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged Bearing Housing as per sample.

Replacement of damaged fan as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Vertical motor as per sample.

Repairs to 3-Phase 50HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged Bearing Housing as per sample.

Replacement of damaged fan as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Vertical motor as per sample.

Repairs to 3-Phase 60HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged Bearing Housing as per sample.

Replacement of damaged fan as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Vertical motor as per sample.

Repairs to 3-Phase 75HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged Bearing Housing as per sample.

Replacement of damaged fan as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Vertical motor as per sample.

Repairs to 3-Phase 100HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged Bearing Housing as per sample.

Replacement of damaged fan as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Vertical motor as per sample.

Repairs to 3-Phase 120HP Vertical Turbine Motor by way dismantling of the Vertical motor at site, shifting to the workshop, repairing, shifting back to site, re-fitting of pump motor assembly and successful testing on full load. The job includes repairing / fabrication and providing / replacement of following items.

Rewinding by using Se enameled Cu-wire (Reputed make) of proper gauge and specification in the stator slots of the motor as per actual pitch and turns after extraction /removal of the damaged/burnt out windings from all stator slots by special tools & tackles, using skilled manpower and cleaning of slots thereof. The job includes insulation of the windings by proper insulating material, varnishing, tape, sleeves, insulated PVC paper, crimpled paper, bamboo sticks, thread etc. Then assembling back of rotor, stator, cover plates, all nuts and bolts of the motor and testing on no load at the workshop. The Old scraps shall be retained by the firm. The rates quoted should be after the deduction of cost of old scrap @ 80% of total weight.

Replacement of damaged Bearing Housing as per sample.

Replacement of damaged fan as per sample.

Repairs to Bearing Housing by way of remetalling, machining etc

Providing/fitting of connection plate for Vertical motor as per sample.

Repairs to VT Pump having discharge from and above 3000GPH and below 10000GPH Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

Line shaft (finished) out of SS-410 material as per sample

Head shaft (finished) out of SS-410 material as per sample

Rubber liner centre kit bush

Muff coupling (finished) out of SS-400 material as per sample

Gun metal gland bush (finished) as per sample

MS gland (finished) as per sample

Facing /treatment of bowel stage and impeller for proper fitment of wearing ring

GM Wearing Ring (finished) as per sample

Cooling ring (finished) as per sample

Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample

Re-metalling of bearing seats and coupling seat then turing and finishing to size and shape

Check nut (finished) as per sample

Ball bearing No: as per sample after removing old damaged bearing by skilled labours and tools/ tackles.

Cost of scrap copper dismattled windings

Repairs to VT Pump having discharge from and above 10000GPH and below 30000GPH Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

Line shaft (finished) out of SS-410 material as per sample

Head shaft (finished) out of SS-410 material as per sample

Rubber liner centre kit bush

Muff coupling (finished) out of SS-400 material as per sample

Gun metal gland bush (finished) as per sample

MS gland (finished) as per sample

Facing /treatment of bowel stage and impeller for proper fitment of wearing ring

GM Wearing Ring (finished) as per sample

Cooling ring (finished) as per sample

Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample

Re-metalling of bearing seats and coupling seat then turing and finishing to size and shape

Check nut (finished) as per sample

Ball bearing No: as per sample after removing old damaged bearing by skilled labours and tools/ tackles.

Cost of scrap copper dismattled windings

Repairs to VT Pump having discharge from and above 30000GPH and below 50000GPH Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

Line shaft (finished) out of SS-410 material as per sample

Head shaft (finished) out of SS-410 material as per sample

Rubber liner centre kit bush

Muff coupling (finished) out of SS-400 material as per sample

Gun metal gland bush (finished) as per sample

MS gland (finished) as per sample

Facing /treatment of bowel stage and impeller for proper fitment of wearing ring

GM Wearing Ring (finished) as per sample

Cooling ring (finished) as per sample

Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample

Re-metalling of bearing seats and coupling seat then turing and finishing to size and shape

Check nut (finished) as per sample

Ball bearing No: as per sample after removing old damaged bearing by skilled labours and tools/ tackles.

Cost of scrap copper dismattled windings

Repairs to VT Pump having discharge from and above 50000GPH and below 90000GPH Dismantling of the pumping unit at site, shifting to the workshop, repairing, shifting back to site, re-fitting and successful testing on full load. Job includes repairing / fabrication and providing / replacement of following items.

Line shaft (finished) out of SS-410 material as per sample

Head shaft (finished) out of SS-410 material as per sample

Rubber liner centre kit bush

Muff coupling (finished) out of SS-400 material as per sample

Gun metal gland bush (finished) as per sample

MS gland (finished) as per sample

Facing /treatment of bowel stage and impeller for proper fitment of wearing ring

GM Wearing Ring (finished) as per sample

Cooling ring (finished) as per sample

Repairs to gland box by way of removing of damaged studs and providing and fitting of new studs as per sample

Re-metalling of bearing seats and coupling seat then turing and finishing to size and shape

Check nut (finished) as per sample

Ball bearing No: as per sample after removing old damaged bearing by skilled labours and tools/ tackles.

Cost of scrap copper dismattled windings

Replacement of damaged Ball/Thrust bearing for different capacity motors with below mentioned sizes of reputed make with all technical labour for disassembling/assembling, transportation/carriage, fitting the new bearing to both DE and NDE and reassembling of pumping unit thereof:

Bearing : 6308

Bearing : 6309

Bearing : 6311

Bearing : 6312

Bearing : 51220

Bearing : 6220

Bearing : 6311

Bearing : 7220

Bearing : 7214

Bearing : 7322

Bearing : 6313/C3

Bearing : N 313 ECP

Bearing : 6316

Bearing : 3310

Bearing : 6306

Bearing : 6312 2Z

Bearing : 6313 2Z

Bearing : 6311 2Z

Bearing : 6310 2Z

Bearing : 6315 ZZ

Bearing : 6316 ZZ

Bearing : 6408

Bearing : 7309

M/S ADIL ENGINEERING WORKS

SHAWL ENGINEERING WORKS

M/S TARUS TRADERS