Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.1 LAccepted-AOC | L1 | Accepted-AOC Being the lowest and reasonable bidder | |
| 2 | L2₹17.3 L+₹19,093.05 (1.12%)Rejected-AOC | L2 | Rejected-AOC Being the other than lowest bidder | |
| 3 | L3₹18.7 L+₹1.6 L (9.63%)Rejected-AOC | L3 | Rejected-AOC Being the other than lowest bidder | |
| 4 | L4₹20.9 L+₹3.8 L (22.3%)Rejected-AOC | L4 | Rejected-AOC Being the other than lowest bidder |
Tender Value
₹21.5 L
EMD Value
₹43,000
Closing Date
27 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
HQ CWE Nagrota
HQ CWE Nagrota CO 56 APO
PROVN OF ONE GUARD ROOM NEAR POST NO-18 AT SATA REGT AT NAGROTA MIL STN UNDER GE NAGROTA
2024_MES_639633_1
CWE/NGT-43/2023-24
Open Tender
Civil Works
Item Rate
182 days
Nagrota
As per NIT and tender documents
8 documents required · 8 mandatory
₹500
Yes
GE Nagrota
₹43,000
Yes
25 Mar 2024
30 Jan 2024
5 Mar 2024
30 Jan 2024
27 Feb 2024
13 Feb 2024
30 Jan 2024 - 6 Feb 2024
Amount
Surface dressing n exc 15 cm deep and getting out in any type of soil.
Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in any type of soil.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, laying of pipes, cables etc. n exc 10 sq m on plan and getting out in any type of soil.
Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but n. exc 3.00 m in depth; for foundation, etc. getting out in hard/dense soil.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point.
M&L for cement concrete in foundations, filling and mass concrete of type D2, 1:4:8 mix, (using 40 mm graded aggregate).
M&L for Reinforced cement concrete M-25 (design mix) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete.
Formwork to sides of concrete foundation, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; similar work; vertical or to batter Rough finished surface of concrete flat.
S&F TMT bars 10mm dia and over, cut to length, bent to shape required including cracking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips .
S&F TMT bars 5mm to 10mm dia, cut to length, in stirrups, spacers & binders.
S&F TMT bars 6-8mm dia and over, cut to length, bent to shape required including cracking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips.
Formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished surfaces of concrete.
M&L for reinforced cement concrete (M-25 design mix) as in Columns, pillars, piers, posts and struts.
Formwork to sides and soffits of floor or roof beams, beam haunchings, griders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete.
M&L for reinforced cement concrete (M-25 design mix) in Beams, cantilevers, bressummers, lintels over 1.5m span (20 mm graded aggregate)
M&L for reinforced cement concrete (M-25 design mix) in Chajjas complete all as specified.
Formwork to chullah hoods, chajjas, troughs and similar items including edges in Rough surface of concrete in Flat Surface.
Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&L for reinforced cement concrete (M-25 design mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like (20 mm graded aggregate)
M&L for brick work with sub-class `B' bricks, straight or curved on plan with modular bricks exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified.
M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified.
M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces in CM 1:3 on ceiling finished even and smooth without using extra cement.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:6 on walls finished even and smooth without using extra cement.
M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in CM 1:4 on walls finished even and smooth without using extra cement.
Preparing newly plastered surfaces of walls and applying two coats of distempering walls with distemper dry, white or tinted.
Preparing new plastered surfaces of walls and applying two coats of cement base paint.
Preparing newly plastered surfaces of ceilings and applying three coats of white wash.
S&F pressed steel frame for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete al as specified of size 105x60mm.
S&F pressed steel frame for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete al as specified of size 125x60mm.
M&L for cement concrete type C1, 1:3:6 mix, (20 mm graded aggregate)as in filling and mass concrete for hold fast and back filling for door frame.
S&F 2nd class hard wood, 40 mm thick plain, framed panelled shutters (any number of panels) with panels of timber flat on both sides (Feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers, fitted to chowkhets.
S&F 2nd class hard wood 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) , supplied and fitted to chowkats etc
S & F Box type Steel windows/vent with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed by Engr-in-Charge.
S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and as directed.(Make Rajshri Plastiwood limited/Sintex or equivalent)
S & F factory made solid panel PVC door shutter with wood free EPS 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail , panelling of plain colour PVC sheet to be fitted in the MS framewelded/ sealed to the stiles and rails with suitable PVC sheet beading , and jointed together with solvent cement in the frame at site as per specification.(Make Rajshri Plastiwood limited/Sintex or equivalent)
3mm thick sheet glass, ordinary quality,in squares n exc 0.5 sqm in each pane etc all as specified.
3mm thick pin head glass, ordinary qaulity,in squares n exc 0.5 sqm in each pane etc all as specified.
S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples etc all as specified.
S&F 150mm long aluminium anodised barrel tower bolt of extruded section and fixed.
S&F 100mm long aluminium anodised barrel tower bolt of extruded section and fixed.
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.
S&F 100mm mild steel butt hinges, medium weight, cold rolled and fixed.
S&F 150mm long aluminium handles cast type, anodised and fitted.
S&F 100mm long aluminium handles cast type, anodised and fitted.
S&F 300mm long ordinary MS rat tail rod pattern springs incl roller and roller plate complete.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood or wood surfaces, over 10 cms width or girth incl preparation of surfaces.
S&F in repair harrison rails, mild steel, chromium plated with fixing brackets, stops, roller etc
Hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface with material and labour, broken stone or boulders.
M & L for 75 mm thick PCC 1:3:6 type C2 as in plinth protection & finishing the surface even & fair without using extra cement complete all as specified and directed.
M&L for 25 mm thick PCC 1:2:4 type B-0 as a sub base to receive topping layer finished even and rough complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement mortar (1:4) 20mm thick screed base laid and mixed with pigment to match the shade of the slab including rubbing and polishing complete
M&L for machine cut kota stone 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement mortar (1:3) 10mm thick screed base laid and mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for non-skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm , in floors etc set and jointed in neat cement slurry and pointed in while or coloured cement to match etc all as specified.
M&L glazed, coloured, ceramic, tiles of size (450mm x 350 mm) x 7 mm thick, on vertical surfaces, such as dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed.
S&F vitreous china squatting pan Orrisa pattern 580x440mm white with integral foot rest (excluding flushing cistern) fixed in repairs
S& F PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve float and handle including brackets (10 ltr) including mild steel tube 32mm dia flush pipe.
S&F vitreous china wash basin angle back, size 600x480 mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets all as specified and as directed .
S&F in the wall, soap dish, vitreous china white, approximate size 160x160x90 in repairs
Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)
S&F Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe)
S & F 15 mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.
Cutting chases, pinning in, making good to facing where rerquired and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick walls
S & F 20mm dia GI tubing medium grade with all fittings and fixed complete to walls or laid in floors.
S & F 15mm bore chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed
S & F 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed
S&F 15mm bore Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed
S&F gunmetal globe or gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed.
Cutting of existing pipe laid any size dia for inserting Tees for new connection of 20 mm dia complete all as specified and directed by Engr-in -charge
S&F in repair Glass corner Shelf of 300mm long all as specified and directed by Engr-in-Charge
M&L for 75mm dia cast iron Nahani Trap, with grating including jointing to waste pipe fixed in concrete type B1(1:2:4)
M&L for PVC SWR gully trap 125/110mm, setting and jointing with solvent cement with grating including jointing to waste pipe fixed in concrete type B1(1:2:4)
Grating doom round 140mm size of PTMT (minimum weight 50gms)
S&F brass chromium plated tubular towel rail,20mm dia, D type, 60cm long between flage.
PVC connection 15mm size with PTMT nuts of length 600mm
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of bore 75mm.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of bore 110mm.
S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of bore 75 mm.
S&F PVC (SWR) vent cowl bore 75 mm.
S&F PVC (SWR) 75 mm bore bends (any radius) fixed with cement joint.
S&F PVC (SWR) 110 mm bore bends (any radius) fixed with cement joint.
S&F 110 x 75mm bore PVC (SWR) reducer fixed to walls with cement joint complete all as specified and directed.
S&F PVC (SWR) 110 mm bore branch piece (Tee) fixed to walls with cement joint with or w/o ovel access door complete all as specified and directed.
S&F 1000 ltr capacity Rotational moulded polythylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified.
S&F 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule.
Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, flat iron ,railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed by Engineer-in-charge.
Preparing new steel surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a priming coat of red oxide complete all as specified and directed.
M&L preparation of new steel and iron surfaces of any description n exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome primer complete all as specified and directed.
M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement complete all as specified Note:- WPC Measured and Paid Separately.
Supplied only for Integral water proofing compound.
Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces
Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm.
One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing(Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) The make of polymeric membrane shall be IWL India Ltd chennai. Ltd or "MOPLY FP" of Texsa India Ltd). NOTE : S&F of APP based polimeric membrane of approved manufacturer will be laid/fixed by authorised person of the same manufacturers units asper relevent IS.
Applying two coat of aluminium paint on top of APP membrane.
M&L for 75mm thick PCC 1:4:8 D-2 (using 40mm graded crushed stone aggregate) as a sub base to chequered tile finished even and rough, complete all as specified and directed.
M&L for 25mm thick PCC 1:2:4 B-1 (using 20mm graded crushed stone aggregate) as a sub base to cheqeured tile finished even and rough, complete all as specified and directed.
M&L for 20mm thick screed or screed bedding in cement mortar 1:4 as a base to chequered tile, complete all as specified and directed.
M&L for chequered cement concrete tiles 20 cm x 20 cm x 25 mm thick , set, jointed and pointed in neat slurry with grey cement and pigments, complete all as specified and directed.
S&F Reinforced concrete pipes,class NP2 ,dia 150mm with one collar per length of pipes, laid in trenches and jointed as specified including packing under and haunching against sides.
Concrete bed to drain pipe including packing and haunching against the sides of pipe after they are laid and tested for 150 mm bore pipe in PCc 1:4:8 type D-2 using 40mm graded stone aggregate complete.
M&L brick work with sub class B brick straight or curved on plan exc 6m mean radius built in cement mortar 1:4 all as spd and directed
M & L for rendering 15mm thick in CM 1:4 on brick/concrete wall surfaces & finished even & smooth, mixed with WPC , without using extra cement. (Note:-WPC will be paid separately)
M & L for PCC 1:2:4 type B-0 using 15mm graded stone aggregate as in copings, benching etc complete.
Extra for forming fair finished drain or channel 30cm inner girth in cement concrete using extra cement including forms, moulds, mittred/stoped ends etc.
M&L for precast cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in manhole /drain slab cover all as specified and set in CM 1:4 complete.
S&F On site LLDPE septic tank With UPFLOW FILTER INLCUDING MEDIA designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc complete for 10 user conventional type all as specified.
Construction of Soakage wells including excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonary with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m dia X 3.0m effective depth complete all as specified.
M&L for point wiring with PVC insulated unsheathed 1100 volt grade FRLS cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium grade ISI marked not less than 20mm dia ,concealed in wall and surface on ceiling with all conduit fittings & fixing acessories inculding sunken anodised pressed steel terminal box not less than 1.2mm thick covered with 3 mm thick plastic laminated sheet cover of suitable size with brass screws for mounting switches, sockets, regulators with and including 1.5sqmm FRLS multi stranded copper conductor drawing as continuous earth wire connected to main earth and earth dolly complete all as specified for the following :-
(a) One light point controlled by one switch 5 Amp.
(b) One ceiling fan/exhaust fan point controlled by one switch 5Amp
(c) One socket out let 5Amp controlled by one switch on same board.
(d) One socket out let 5 Amp controlled by one switch on independent board.
All as per item No 109 here in before but point wiring with 2.5sqmm FRLS multi stranded copper conductor cable for main circuit and 2.5sqmm cable as earth continuity conductor for one 15Amp socket out let controlled by one 15Amp switch on independent board.
S&F switch piano flush type 5 Amps single pole one way complete.
S&F switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete.
S&F switch socket combination 2 in 1, 5 pin, 5 /15 Amps flush type complete.
S&F of ceiling rose, surface type 65mm x 50mm, 2 to 3 terminal complete PVC/Polycarbonate isolated body complete all as specified and directed.
S&F stepped type electronic fan regulator 300 watt, 230 volts, 50 Hz , AC supply complete all as specified and directed.
Supply and fixing LED light fitting 1x 18 W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S & F LED light fitting 1x9W bulkhead luminaires IP 65 complete with all accessories including LED lamp 9 watt, connecting up with twin core flexible copper conductor cable of suitable size of 230 V, 50 Hz.
S&F for lamp holder PVC/polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S&F for LED bulb 7 watt complete all as specified and directed.
S&F sheet metal enclosure distribution board SPN 8 way 230 V, 50 Hz double door with neutral, Earthing bar and din rail complete
S&F MCB SPN 40 A to 63 A 10 KA 240 volts "C" series complete
S&F MCB single pole 6 to 32 Amps 10 KA 240 volts "C" series complete
Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver complete
S&F ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep, min air delivery 210 CFM with service value 6.00, BEE five star rated with brushless direct current motor (BLDC) compatible conventional fan regulator complete.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete.
M&L for well burned bricks , laid flat ( old size) sub class B designation '75' for cable protection copmplete all as specifed and directed.
Sand cushioning to under ground cable laid in trenches for laying of LT UG cables 8 cm depth before laying the cable and 15 cm after laying and punned down to a depth of 10 cm as per MES SSR Part-I (2009) all as specified and directed. Note: Punned thickness shall be measured and paid to the contractor.
Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed 16 sq. mm 2 core nominal cross section in service connections
M/S MANISHA BUILDERS
BHARTI CONSTRUCTIONS
ASHWANI KUMAR KHAJURIA AND SONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .