88/APAS/MTG/BDO/25-26/1st, 19.02.26

[Page No 11 of 315, Sl No 8]:-Taking out carefully G.C.I. or C.I. or asbestos sheets (including ridges etc.) from roof or wall after unscrewing bolts, nuts, screws etc.and stacking the material at site as directed. (Payment to be made on measurement of portion of roof or wall removed.)

[Page No 11 of 315, Sl No 10]:-Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed.

[Page No 11 of 315, Sl No 6-a]:-Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. (a) In ground floor including roof.

[Page No 10 of 315, Sl No 2-a]:-Dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m . In ground floor including roof. (a) upto 150 mm. thick

[Page No 26, Sl No 10 (ii)]::(III) Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. River bazree,

Item No. 36(a)// Page No. 46::Hire and labour charges for shuttering with centering and necessary staging up to 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved & straight including fitting, fixing and striking out after completin of works (uptp roof of Gr floor), (f) 25 mm to 30 mm shutterng without staging in foundation.

Sl. No. 29// Page- 32.::125mm th. Brick work with 1st class bricks in cement mortar (1:4) In superstructure G.F.

Plaster with Sand cement mortar including round off chamfered corners as directed and raking out joints or roughening of concreye surface,includingthrotening,noising and drip course where necessary. 15 mm thick (1:4) ( Rate Analysis attached).

Neat cement punning about 1.5mm thick in wall, dado,window sill's floor drain etc ( Rate Analysis attached).

Page No 82, Sl No. 14.::Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).a) With 0.5 mm thick sheet

Page No 81, Sl No. 10::Galvanised iron sheet ridging fitted with necessary bolts, screws, washers etc complete.(225mm end lapping) (A) 300 mm lapping each way, (c) With 0.80 mm sheet [Page No 81, Sl No. 10.]

Page 48, Sl. No. 6(ii) {Vide Page 5 of 6th corrigenda of dated 29/07/2019::-Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. (ii) 25mm thick,

Cement concrete (1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any

Item No. 1(c)// Page No.88::Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete, Iron Bolt hinges and MS Clamp © Sal, Siliguri.

[Page No 123, Sl No. 10.]::Z-batten shutters of door and window as per design havings tongued and groovehalf lap jointed as per direction of the Engineer-in-Charge including fitting and fixing shutter in position, but excluding the cost of hinges and other fittings in ground floor. (A) Shutter with 25mm thick planks, 19mm thick battens (i) Sal : Local.

Item No.1//Page No. 200::Priming one coat on timber, plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (b)On Steel or other metal surface

(a)On timber, plastered surface

Item No.2//Page No. 200::Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc including using of approved putty etc on the surface of necessary Two Costs (with any shade except whites)

(a)On timber, plastered surface

[P-195/ Item- 07,]::Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)

[Page 197,Sl. No. 17]::Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per anufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.

SOR-2018, ROAD & BRIDGE WORK_Item No-8.07/Page no-270:: Providing & fixing Concrete Sign Board as per IRC specification of size 900 x 750 x 37 mm. thick made with RCC 1:1½:3 with pakur variety stone chips reinforced with double layer IRC febric (75 x 75 mm.mesh) and fixed with necessary nuts & bolts on two RC precast posts 100 mm. x 150 mm. of height 2.65m. of which top 750 mm. is of section 100 x 13 mm.and 1.90 metre above GL & 0.75 metre below GL including digging hole, repacking the same with cement concrete 1:3:6 with jhama khoa or with local stone chips etc. complete including painting two coats on both faces lettering sign marks etc. as per direction of the Engineer-in-Charge. (The rate is inclusive of cost of reinforcement, concrete,shuttering, nuts & bolts, washer etc. complete.)

GST @ Rs. 18%

Cess @ Rs.1%

Please Enable Macros to View BoQ information