Replacement of Datacom Equipment's of PRS/UTS at Tier 2,3 & 4 and down locations over Hubballi Division

Item Breakup - 1-Schedule-A

Supply and installation of Router with 4X1000 Numbers M Base T Ethernet WAN PORTS , 4X E1/G703 WAN Ports, 4/8 X1000 M Base T ETHERNET LAN ports . AC Power Supply. As per the specification in Annexure-I along with standard/reputed make (Inspection :RITES)

Supply and installation of Router with 2X1000 Numbers M Base T Ethernet WAN PORTS , 2 X E1/G703 WAN Ports, 4/8 X1000 M Base T ETHERNET LAN ports . AC Power Supply As per the specification in Annexure-I along with standard/reputed make.(Inspection:RITES)

Supply and installation of 4X 1000 M WAN 1G Numbers SFP port card Loaded with 4 No 20 KM SM SFP Modules . compatible for above 8/4 port Routers. (Inspection:RITES) HUBLI DIVISION-S AND T/SOUTH WESTERN RLY

Supply and installation of Layer 2 Switch, Numbers Minimum 8+2 Port Manageable with 8 Nos 10/100/1000 Mbps Ethernet port, POE+ & Single Fiber 2 Nos 1G SFP Port with BX SM SFP Optical Modules loaded with all accessories etc. As per RDSO/SPN/TC/65/2021 Version 6.0 with latest Amdt. . (Inspection:RITES)

Supply and installation of 30 Mbps 2W/4W Pair LAN Extender supporting short and long distance (upto 10 Kms or more) with AC/DC dual power supply from a single socket plug in module in standalone unit to be compatible with existing central rack multi wave 16 with standard/reputed make. (Inspection:Consignee)

Supply and installation of Modem Pairs V35 & Set G703, 2 Wire Leased Line 2 Mbps (N*64Kbps) as per RDSO Specification RDSO/SPN/TC/80/2020 or latest. with standard/reputed make.(Inspection:RITES)

Supply and Installation of Rack mountable 12 Numbers F Fibre management system (FMS)as per RDSO/SPN/TC-37/2000(rev-3)amdt-1 or latest. (Inspection:Consignee)

Supply and fixing of OFC patch cards 5 Mtrs Numbers length as per site requirements. (LS-SC, SC- SC, LC-LC, FCFC patch cards as per site requirement) .(Inspection:Consignee)

Supply and Fixing of PVC casing and Metre capping/PVC pipe of minimum 25 mm size or higher as per requirement at site on the wall/floor etc., using bends, coupler and T joints and flexible pipe wherever necessary with fixture in the OFC room from equipment rack to common termination and from OFC room to SM room/ Reservation office / Data logger/FOIS room etc. (All required material for fixing to be arranged by the contractor) (Inspection:Consignee)

Laying / drawing of various type of cables on Metre PVC pipe / capping casing, or cable trays, ladder, shelter etc. as instructed by Railway engineer at site. (Indoor cables to be drawn through pipe, outdoor cables if required to be clamped on wall /floor etc. Total 36702522.00