REPAIRS TO JOINERY, ROOF TREATMENT, FLOORING, SUNKEN FLOOR OF KITCHEN/TOILETS, PLASTERING, PLUMBING, SANITARY FITTINGS AND SERVICE TANK CLEANING ETC AT HANUMAN TEMPLE AREA UNDER AGE BR SOUTH NO I OF GE SOUTH SECUNDERABAD

Amount

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) not exceeding 1.5 Sqm each including steel windows etc complete all as specified and as directed.

M&L Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S Square tube, supplying and fixing in opening as per manufacturers instructions complete all as specified and as directed.

M&L for Factory made solid panel laminated PVC door shutter 30mm thick (style) consisting of frame made out of M.S tube for top & bottom rails. M.S Srame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail : Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled the stiles & rails with suitalble PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications & drawing complete all as specified and as directed.

S&F 100 mm long butt hinges extruded aluminium alloy with galvanised mild steel hinge pin type C-21 anodised and fixed complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section with 150 mm long bolt, all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frames ) exceeding 1.5 Sqm but n exc 4.00 sqm each incl steel windows etc complete all as specified and as directed.

S&F powder coated anodised aluminium frame for three track sliding windows, fixed/top hung frame for ventilators with one or more rebates including jointing cleats for fixing etc. including making good distrubed portion of wall complete all as specified and as directed.

S&F powder coated anodised aluminium sliding window shutters and top/side hung ventilator shutters without sash bars, including jointing cleats, glazing clips, rubber packing, locking arrangement complete all as specified and as directed.(Note: Glass pane and wire mesh shall be measured and paid seperately).

S&F Mild steel framed work such as grills, guard bars, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

M&L for 2 coats of synthetic enamel paint over a coat of red oxide, Zinc chrome primer including preparation of new steel surface of any description over 10 cm width and girth complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins or spring clips and providing and fixing new clips or pins, all as specified and directed.

M&L for sheet glass ordinary quality 3 mm thick fitted with beading/putty n.exc 0.5 sqm each complete all as specified and as directed.

M&L for 5.50mm thick sheet glass, ordinary quality in squares exceeding 0.50 Sqm in each pane fixed to aluminium frame complete all as specified and as directed.

M&L for sheet glass ordinary quality 4 mm thick fitted with beading/putty n.exc 0.5 sqm each, sheet glass is ground or obscured or frosted, on one side and fixed complete all as specified and as directed.

S&F in repairs for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm but n exc 2 sqm each complete all as specified and as directed.

Pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

Pressed steel frames of size 125x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate complete all as specified and as directed.

M&L for PCC for filling hollow of steel frames type C0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified and as directed.

S&F Factory made 35mm thick 2nd class hard wood factory made glazed and skeleton shutters open rebated and prepared to receive glass/gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass and gauge complete all as specified and as directed.

S&F 30 mm thick flush shutter ,solid core construction ,with block board core with decorative face veneer with lipping finish on one side complete all as specified and as directed.

S&F 30 mm thick flush shutter ,solid core construction ,with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm complete all as specified and as directed.

S&F Stainless Steel butt hinges 100mm long medium weight cold rolled mild steel etc all as specified and directed.

S&F Stainless steel tower bolts of extruded section with 200 mm long bolt, all as specified and directed.

S&F 300mm long stainless steel, anodoised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and as directed.

S&F 300mm long mild steel ordinary rat tail rod pattern spring incl roller and plate complete all as specified and as directed.

S&F stainless steel fabricated D type, anodised, 150 mm size complete, all as specified and directed.

S&F in repairs floor door stopper of aluminium alloy body overall length 150 mm complete all as specified and as directed.

M&L for Preparation of new wooden or wood based surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed.

S&F in repairs 2nd class hard wood plain fillets, square, rectangular in section wrought screwed with nails area exceeding 13 sqcm but n exc 25 sqcm complete all as specified and as directed.

S&F in repairs for prelaminated particle board of 18/19mm thick interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with timber frame work of cupboards book cases etc complete all as specified and as directed.

S&F in repair hasp & staple 100mm size aluminium anodised fixed with screws complete all as specified and as directed..

S&F continous (Piano) hinges, mild steel, bright finished or electrogalvanised width of flaps in 30mm complete all as specified and as directed.

S&F in repairs 40mm dia cupboard knobs fixed with nuts screws and washers of brass polished of approved quality complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) in ground floors and pavings not exceeding 15cm thick(below or above ground level) complete all as specified and as directed. .

M&L for 25 mm thick plain cement concrete 1:2:4 type B-0 (12.50 mm graded aggregate ) as in floors complete all as specified and as directed.

M&L for 40 mm thick for PCC (1:2:4) type B1, (20 mm graded stone aggregate) as in flooring finished even and smooth using extra cement complete all as specified and as directed.

M&L for 75mm thick plain cement concrete in (1:3:6) type C2 (using 40 mm graded aggregate) as in plinth protection finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed.

M&L for Non - skid Ceramic jointfree tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

M&L for 18 to 20mm thick black Granite (of any type) work (table rubbed and polished) in steps, jambs,pillars, window-cills, cooking plat-forms and like in cement mortar (1:4) incl pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite incl screed bed or bedding layer of mortar 20mm thick in cement mortar 1: 6 complete all as specified and as directed.

Rounding to edges of stone slabs one edge such as in steps cooking platform and other similer work complete all as specified and as directed.

M&L for 10mm thick vitrified ceramic tiles light shade polished,area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Dismantling floor hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles of size 450x300x6 to 7 mm thick wall tiles set and jointed in neat cement slurry and pointed in white/coloured cement to match with the colour of tile over 10 mm thick backing coat in CM 1:4 as in skirting / dados etc, complete all as specified and as directed.

M&L for Non - skid Ceramic joint free coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in skirting/dados etc. over 10mm thick backing coat in in CM (1:4) on walls such as backing of tiles complete all as specified and as directed.

M&L for 10mm thick vitrified ceramic tiles, light shade,area of each tile not exceeding 0.36 sqm in skirtings/ dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick cement plaster backing coat in CM 1:4 complete all as specified and as directed.

M&L for plain cement concrete 1:5:10 type E-2 (using 40 mm graded aggregates) as in floor filling complete all as specified and as directed.

M&L for rendering 15mm thick in CM 1:3 using water proofing compound as per manufacture instruction, finished even and smooth with out using extra cement as in sunken floor complete all as specified and as directed. (Note: WPC will be measured and paid separately)

M&L for rendering 15mm thick in CM 1:3 on brick work or concrete surfaces, mixed with integral water proofing compound as per manufactures instructions, finished the surface even and smooth without using extra cement and applying evenly a tack coat of blown bitumen 85/25 @ 1.2 Kg/Sqm over a coat of waterr based bitumen emulsion primer at the rate of 0.30 Kg/Sqm including cleaning the surfaces thoroughly from dust and dirt and lay waterr proofing treatment with felt having glass fiber non woven reinforcement and weighing 3.0 Kgs/Sqm to 4.0 Kgs/Sqm in 100mm overlaps both longitudinally and transversely by torch bounding over a coat of blown bitumen 85/25 @ 1.2 Kgs/Sqm on top of felt as in sunken floor (bottom and vertical) complete all as specified and as directed.(Note : Supply of water proofing compound will be measured and paid separately .)

Supply only water proofing compound complete all as specified and as directed.

Taking down cement plaster from brick or stone walls, ceiling etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick works in cm 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5 mm thick on ceiling in CM 1:3 finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cement incl mixing of water proofing complete all as specified and as directed. (Note: Water Proofing compound shall be measured and paid for separately)

M&L for applying two coats of oil bound distemper over a coat of primer with wall care putty, 3mm thick including prepartion of new surfaces on walls complete all as specified and as directed.

M&L for applying three coats of white wash on ceiling including perpartion of new plaster surfaces complete all as specified and as directed.

M&L for applying two coats of cement base paint on new plastered surfaces of wall including preparation of surfaces over a coat of priming paint complete all as specified and as directed.

M&L for making good of the fallen/broken portion of the RCC Roof/Ceiling /chajja with proper reinforcement binding & application of antifungal paint for avoiding rusting of old steel reinforcement complete including preparation and appropriate OBD/Colour wash/cement base paint/ white wash etc all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 500 Llitres including PTMT ball valve high pressure of 20mm including dismantling water tanks exe 250 and exc 500 ltrs capacity of any type or size complete all as specified and as directed

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of Capacity 1000 litres including PTMT ball valvehigh pressure of 20mm including dismantling water tanks exc 500 and n exc 1000 Ltrs capacity of any type or size complete all as specified and as directed

S&F in repairs Gun metal globe or gate valves high pressure with polythene float and fly nut complete screwed for iron pipe or for unions of 20 mm bore and complete all as specified and as directed.

S&F in repairs Ball valve, high pressure with PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or fixed of size 20 mm bore (Min Wt 20mm- 210 gms) complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet (pedestal pattern) with plastic seat and cover including PVC low level flushing cistern 10 ltrs capacity,flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs Vitreous china wash hand basin white flat back size 550x400mm including brackets, CP pillar cock (fancy type )of 15mm bore, CP waste fittings 32mm, incl waste pipe complete all as specified and as directed.

S&F in repairs Vitreous china orrisa pan squatting pattern 580 X 440mm with integral foot rests including P or S trap, PVC low level flushing cistern 10 ltrs capacity complete all as specified and as directed.

S&F in repairs PVC low level flushing cistern 10 ltrs capacity white , with inlet ball valve , float and handle including brackets , Flush pipe of polythylene of low or high density or PVC 32 mm dia , PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

S&F in repairs Plastic water closet seat, black or white closed pattern, solid type with flat bottom, and cover and mild steel chromium plated hinging device complete all as specified and as directed.

S&F in repairs 125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F in repairs Pillar taps fancy type , cp brass chromium plated screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly–nuts, screwed for 15 mm bore iron pipe complete all as specified and as directed.

S&F in repairs fancy type bib taps, brass chromium plated with capstan head, screwed down, screwed for 15 mm bore iron pipe complete all as specified and as directed.

S&F in repairs stop valves, brass, chromium plated, fancy type with capstan head screwed down, high pressure, screwed both ends for 15 mm bore iron pipe or for unions complete all as specified and as directed.

S & F in repair 15 mm dia stop valves brass chromium plated with long shank (concealed), screwed both ends for iron pipe complete all as specified and as directed.

S&F in repairs angular stop valve brass chromium plated screwed for 15 mm bore iron pipe complete all as specified and as directed.

S&F in repairs Tubular Towel rail 20mm dia, D type, 60cm long between flanges of brass chromium plated fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and as directed.

S&F in repairs 20mm dia CP decorative type draphery curtain rods with brackets of approved pattern and quality complete all as specified and as directed.

S&F in repairs bathroom cabinet with door (size 400mm x 500 mm) fitted with looking mirror complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratary with plugs washer and wastes including bedding in cement mortar to drawf wall or including fixing cantiliver brackets and connecting union to pipes overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and as directed.

S&F in repairs for stainless steel plate rack of size 750x900x250 mm of approved make and quality complete all as specified and as directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls,(concealed) 15mm bore.including taking down old pipe complete all as specified and as directed.

S & F steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls, 20mm bore.including taking down old pipe complete all as specified and as directed.

S&F in repairs 15mm bib tap standard of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 90 gms) complete all as specified and as directed.

S&F in repairs 15mm pillar tap of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 110 gms) complete all as specified and as directed.

S&F in repairs 15mm stop valves of PTMT any colour high pressure screwed for iron pipe (Min Wt 15mm- 90 gms) complete all as specified and as directed.

Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc from tanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capacity of tanks exc 250 & n exc 500 ltrs and reconnecting ,air lock complete all as specified and directed.

Cleaning of RCC/PVC water tanks with bleaching powder disconnecting the connection & removing all scales and dirt etc fromtanks & from mouth of circulating pipes etc including writing with paint out side tanks " tank cleaned on with month and year " capacity of tanks exc 500 & n exc 1000 ltrs and reconnecting ,air lock complete all as specified and directed.

S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 110mm including demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed.

S&F PVC (SWR) pipes single socketed , in any length with rubber ring joints, fixed to walls bore of the pipe 75mm including demolition and breaking up drain AC pipes/PVC pipe set in cement mortar of any size complete all as specified and as directed.

S&F in repairs PVC (SWR) bends 110mm complete all as specified and as directed.

S&F I repairs PVC (SWR) bends 75mm complete all as specified and as directed.

Demolition of cement concrete (un-reinforced ) of any description and in any position not otherwise specifically provided for complete all as specified and as directed..

Taking down existing water proofing treatment with tarfelt including cement plaster from roof including parapets etc, and removing the debris to a distance not exceeding 250m complete all as specified and as directed.

M&L for 40mm thick plain cement concrete (1:2:4) type B1 (using 20 mm graded stone aggregate) as in padding (level course) on roof complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:3) using water proofing compound as per manufacturer instruction as in roof and chajjas complete all as specified and as directed. Note : Water proofing compound will be measured and paid separately.

M&L for priming plastered roof surfaces (Non approachable roof ) with bituminous primer @ 0.3 Kg/Sqm as per IS 3384 and providing water proofing treatment by applying 3.5 Kg/Sqm ATACTIC polypropylene (Advanced APP torch on membrane) having polyster film reinforcement stabilized with fibre glass and two coat aluminium paint over APP membrane of thickness 3mm by torch bonding complete all as specified and as directed.

M&L for water proofing treatment with APP based standard membrane over PCC padding in approachable roof with the following courses of treatment : (a) Apply bituminous primer (IS3384) @ 0.30 Kg/Sqm of the surface area including cleaning the surface complete all as specified . (b) Apply APP plastomeric bitumen based water proofing membrane polyster reinforced (3.50 Kg/Sqm) with 10 cm overlaps and torch bonded at joints including surface preparation before and after application of treatment as per manufacturers instruction complete all as specified.

M&L for M&L for cement concrete tiles 25cm x 25cmx22mm thick machine pressed set jointed and pointed in neat cement slurry in floors and cut polished with grey cement and no pigment over 20 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Supply only Polyster Fibre . Make (RECRON 3S or equivalent) complete all as specified and as directed.

M&L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

M&L for plain cement concrete 1:2:4, type B1, (20 mm graded aggregate) as in roof kerbs, tank stagging and similar works etc complete all as specified and as directed.

M&L for uprooting of wild trees such as grass/bushes etc from the roof / wall surfaces / AC sheets/soil pipes surrounding including its penetrated roots with suitable cleaning chemical and making good to the damaged plaster by providing CM 1:3 and finish the surfaces to match with the existing surface complete all as specified and as directed.

M&L for crack filling with approved crack filler to arrest seepage and running water through masonry/RCC surfaces etc. complete all as specified and as directed.

M&L for preparation of plastered surfaces and applying two coats of water proof coating (Dr. Fixit Rain Coat exterior waterproof coating) over a coat of primer (Dr. Fixit Prime seal diluted with potable water by volume in 2:1 ratio, 2 parts primer and 01 part water) including filling of cracks upto 5 mm width, with Dr. Fixit Crack-X, or Dr. Fixit unifiller on external surfaces of wall to arrest the seepage / dampness and running water in the masonry surfaces complete all as specified and as directed.

Supply and fix in repair 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix in repair Grating doom 100 mm dia of PTMT (Minimum weight 25 gms) complete all as specified and as directed.

M&L for cleaning, removing the dirt, grinding and beeswax polishing over terrazzo tile flooring and skirting all as specified and directed

S&F in repair for pully operated clothes drying system pully it 8 feet (with 4 pipes) consisting of four anodoized aluminium pipes each of outer dia 22mm and inner dia 19.8mm and pully made up of Derlin with rope guide mounted on channel pair of length 24" (distance between two pipes is adjustable) and locking system to hide rope knot, channel to be mounted of fixed with selftapping screws provided with kit. Rope will be polyster braided undyed of 3.5+ 0.5mm dia. all as spd and directed

Supply and fix in repair CP health faucet with 01 Mtr tube and hook complete all as specified .Make : Cat No:ALD-579 of Jaquar or equivalent make as specified here-in-after.

Supply and fix in repair wall mixer with provision of overhead shower with 115 mm long bend pipe on upper side , connecting legs & wall flanges complete all as specified and as directed .Make :Cat No: FLR-5273UPR of Jaquar or equivalent make as specified here-in-after.

Supply and fix in repair 150 X150 mm overhead shower as per Jaquar Cat No.OHS-CHR-1605 Or its equivalent make as specified here in after complete all as specified and as directed.

G SATISH REDDY AND CO

NARAYANA CONSTRUCTIONS

VACON INFRASTRUCTURES

BEEGEE DESIGN SYSTEMS

ATUL ENTERPRISES

G.MADAN MOHAN

LAKSHMI ENGINEERS

PARDEEP AND CO

K LAKSHMAN SINGH AND CO