PERIODICAL SERVICES AND REPAIRS TO RCC CHAJJAS FACIA COLUMNS BEAM AND CONNECTED ITEMS TO INTERNAL SURFACES OF BLDGS. AND REPAIRS AND MAINT INCLUDING CLEANING OF SEWAGE LINE, MANHOLE, SEPTIC TANKS, SOAK PITS UNDER C2A AND C2B AREA UNDER GE(EAST) MA

Amount

M&L for preparation of old decorative surfaces and applying one coat of oil bound distemper on wall complete all as specified and directed by Engr-in-charge

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper with spray machine, spray hard to reached area to achieve excellent application using limited manpower over a coat of wall care putty not less than 1mm thick complete all as specified and directed. Note :- (i) Oil bound distemper shall be applied machincally by latest machine such as trucare Graco or equivalent having minimum pressure of 3300 PSI.

M&L for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and directed.

M&L for preparation of old plastered surface of ceiling and applying two coats of white wash all as specified and directed by Engineer in charge.

M&L for providing wall care putty not less than 1 mm thick on surfaces of wall all as specified and directed by Engineer in charge.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old painted steel surface of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint all as specified & directed by Engineer-in-Charge

Taking down cement plaster on brick or stone masonry wall incl racking out joints hacking for key , scrubbing down with water etc also as in internal and external surfaces of man holes , septic tank , filter bed etc including removing debris off the primes.

M&L rendering 15mm thick (10mm + 5mm) plaster on fair face of brick work in CM 1:4 and surface finished even and fair by mixing liquid water proofing compound as per manufacturers instructions complete. Note :- Liquid WPC shall be measured & paid seprately under relevant item of this BOQ.

Supply only liquid water proofing compound hydroseal-W+ / Dr Fixit or eqivalent (for plaster hardening, to contol efflorescence & fungal growth) as approved by GE.

M&L for 10mm thick rendering in cement Mortar 1:6 on wall on fair faces of brick/concrte surface finished the surface even and smooth without using extra cement complete all as specified as directed by Engineer-in-Charge.

M&L for Rendering 5 mm thick in cement mortar 1:3 on ceiling surfaces & surface finished even and smooth without using extra cement complete.

M&L for preparation of newly plastered surface of ceilling and applying three coats of white wash on ceiling surface complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of wall and applying two coats of Oil Bound Distemper on wall complete all as specified and directed by Engineer-in-Charge.

M&L for repairing the edge / corner of Chajja / roof projection and similar work by removing plaster width / girth not exceeding 150 mm and making good with 10 mm thick rendering in cement mortar 1:3 to match with existing surface complete all as specified.

M&L for complete removal of existing treatment of wall/ceilings and applying two coats of weather proof acrylic exterior paint dark shade (100% Acrylic) over a coat of self primer with spray machine, spray hard to reached area to achieve excellent application using limited manpower including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. Note :- (i) Weather proof acrylic exterior paint shall be applied machincally by latest machine such as trucare Graco or equivalent having minimum pursue of 3300 PSI.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of primer including preparation of surface of wall including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

M&L for complete removal of existing treatment of wall & preparation of old plastered surface of walls and applying two coats of cement base paint including preparation of surface of wall including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed.

S&F in repair 25 mm dia anodised aluminium alloy tubular drapery rod cut to size and fixed in position including fixing brackets,stops end caps etc. complete all as specified.

S&F in repair Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete.

Hacking out old broken glass (any thickness, size, quality or description) from metal or wooden frame, glazed with putty or fixed with beads complete.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in Sqm n.exc 0.50 Sqm in each pane complete.

S&F 3 mm thick Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 in each pane complete all as specified.

Cleaning and de-sludging water/ liquid/semi solid sludge in foul position from soak wells of any size depth or width by mechanically with pump and filling in the covered tank mounted on truck (Honey Sucker) and disposing of the same out side of MOD land complete all as specified.

M&L for 75 mm dia of outlet cast iron Nahani trap as in repairs

M&L for Salt glazed stoneware gully trap round mouthed, type 'P' 150 x 150 mm size as in repairs

S&F in repairs 110 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring jointed fixed to wall incl necessary clamp etc complete.

S&F in repairs 75 mm dia PVC (SWR) pipes type 'A' single socketed in any length with rubber ring jointed fixed to wall incl necessary clamp etc complete.

S&F PVC (SWR), junction single, (Single T) equal or unequal with acess door 110 mm bore complete all as specified.

S&F PVC (SWR) bends any radius 75mm bore complete all as specified.

S&F PVC (SWR), junction single, (Single T) equal or unequal with acess door 75 mm bore complete all as specified.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. and getting out in soft/ loose soil.

Excavating in trenches, n exc 1.5 m wide and exc 1.5 m but n exc 3 m in depth, for foundation, etc. and getting out in soft/ loose soil.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed 100mm int dia of pipe.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed 150mm int dia of pipe.

Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement motar including cement concrete bedding and haunching complete all as specified and as directed 200mm int dia of pipe.

M&L for Concrete bed to drain pipes M-10 grade (Nominal Mix) using 40mm graded stone aggregate bore of pipe 100 mm including packing under, and haunching against the sides of pipes after they are laid and tested.

M&L for Concrete bed to drain pipes M-10 grade (Nominal Mix) using 40mm graded stone aggregate bore of pipe 150 mm including packing under, and haunching against the sides of pipes after they are laid and tested.

M&L for Concrete bed to drain pipes M-10 grade (Nominal Mix) using 40mm graded stone aggregate bore of pipe 200 mm including packing under, and haunching against the sides of pipes after they are laid and tested.

M&L for NP 2 drain pipes, grade `A` of 100mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified and as directed.

M&L for NP 2 drain pipes, grade `A` of 150mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified and as directed.

M&L for NP 2 drain pipes, grade `A` of 200mm internal dia laid in trenches and jointed in cement mortar 1:1 all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) cement concrete M-15 grade (Nominal mix) using 20mm grade stone aggregate smooth finished and reforming benching as required for 150 mm int dia of pipe.

S&F Cast iron work grade FG 150, unmachined, in gully traps, gratings, manhole covers and similar articles.

Demolition of cement concrete in ground floors and pavings n exc 15 cm thick (above or below ground level) complete all as specified

M&L for 150 mm thick PCC M-15 grade (Nominal mix) using 20mm graded stone aggregate as in floor/ hard standing, finishing the surface even and smooth without using extra cement.

Demolition of reinforced concrete (cutting reinforcement as required to facilitate demolation of roofs, floors (other than ground floors), beams, staircases, landing, chajjas, cover slab and similar suspended work all as specified.

Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles.

M&L for brick work with old size fly ash bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and as directed.

M&L for PCC M-10 grade (Nominal mix) using 20 mm graded stone aggregate in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

M&L for use & waste of steel form work (rough finished flat) to soffits of concrete, roof slabs n.exc 200mm thick, shelves etc complete all as specified and as directed.

M&L for use & waste of Steel Form work to edges of suspended slabs n.exc 200mm thickness for fair finished surface complete all as directed.

M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

M&L for TMT bars 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Ditto- all as per item No 54 above but MS round bar 10 mm dia and over as in handles of manhole covers.

M&L for Precast RCC M-25 graded (Design mix) as in cover slabs for manholes etc.

M&L for RCC M-25 graded (Design mix) as in slabs supported on walls, beams, and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complet all as specified.

M&L for providing precast cement concrete M-15 grade (Nominal mix) using 12.5 mm graded stone aggregate louvers and jallies 40mm thick including all mouldings set in CM 1:4.

M&L for 15 mm thick plastering in CM 1:4 on fair faces of brick work or concrete surfaces and finishing the surfaces even & smooth without using extra cement all as specified and as directed.

M&L for 15 mm thick plastering in CM 1:4 on other than fair faces of brick work surfaces and finishing the surfaces even & smooth without using extra cement all as specified and as directed.

Construction of septic tanks including excavation in ordinary soil, fdn in PCC 1:2:4, brick work in CM 1:4, RCC slab, reinforcement, including RCC manhole covers, CI vent shaft and sludge chambers etc, for 25 users complete all as specified and shown on drawings.

Construction of Soakage, well excavation in ordinary soil, foundation in PCC 1:3:6, wells of honey combed and solid brick work in CM , RCC slab covers, filling with brick bats, complete of size 1.80 mtr dia and 3.0 mtr deep all as specified and shown on drawings..

SHRI RADHAYSHYAM JHA

B S ENTERPRISES

M/s Hoti Lal Contractor

DYNAMIC BUILDING SOLUTIONS

mh enterprises

BHARDWAJ CONSTRUCTIONS