Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.6 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹17.0 L+₹1.9 L (13.0%)Rejected-Finance HARSH INFRASTRUCTURE NEAR DWARKADISH PETROLEUM NANDANA DEVBHOOMI DWARKA JAMNAGAR GUJARAT 361315 | DEVBHUMI DWARKA | GUJARAT | 361315 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹17.2 L+₹2.2 L (14.4%)Rejected-Finance INDEX NO D 01 HQ CE SC PUNE SHOP NO 06 FIRST FLOOR OPP CHAMUNDA HOTEL AT BOKHIRA DIST PORBANDAR GUJARAT 360579 | PORBANDAR | GUJARAT | 360579 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | Rejected-Technical | - | Rejected-Technical NOT ADMITTED |
Tender Value
Refer Docs
EMD Value
₹28,000
Closing Date
8 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER DAMAN
Garrison Engineer Daman, Tat RakshakVihar, Dalwada, Nani Daman Post, Daman (UT) PIN396210
CLEANING AND REPAIR SEWAGE LINE SEPTIC TANK MANHOLE COVERS INCLUDING MISC CIVIL WORKS AT ICGAS DAMAN
2023_MES_632041_1
8735/E8
Open Tender
Civil Works
Works
330 days
DAMAN
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GARRISON ENGINEER DAMAN
₹28,000
5 Mar 2024
11 Dec 2023
10 Jan 2024
11 Dec 2023
8 Jan 2024
25 Dec 2023
Amount
Cleaning/clearing blockage in traps of WC's, Floor traps, Nanhi traps, Gully traps, Bends (with or without door), T junctions (with or without door), Y junctions (with or without door)etc in any position and making the sewer system (sewage and sullage) fully functional by suitable mechanical means etc complete. Note:- Each job shall be carried out in a day to day requirement basis as specified and directed by Engineer-in-charge.
Cleaning/clearing blockage in manholes of any description and size but depth not exceeding 1.80m from GL by suitable mechanical means and making fully functional etc complete. . Note:- Each job shall be carried out in a day to day requirement basis as specified and directed by Engineer-in-charge.
Cleaning/de-sludging of SWG/RCC Sewage lines of any dia not exc 250mm bore of pipe by using suitable mechanical means including disposal of any sludge/excreta/sullage/sewage in closed tanker and disposing the same to designated places as earmarked by the local bodies or disposing the same under own arrangement of contracotr complete. . Note:- This job shall be carried out in a day to day requirement basis as specified and directed by Engineer-in-charge.
De-sludging/De-silting of 500 user septic tank including filter bed by bailing out fluid, decomposed materials sludge etc outside MD land complete all as directed by Engineer-in-charge. . Note 1. Sludege/de-composed materials obtained from cleaning shall be removed outside MD land by mechanical sewage cleaning tanks and disposed off to designated places as ear marked by local bodies. . . Note 2. Rate inclusive of clearing away all grass vegetation, saplings shrubs and trees not exceeding 30cm girth upto 3 mtrs alround the septic tank and removing rubbish upto a distance 50mtrs outside the periphery area.
De-sludging/De-silting of 150 user septic tank including filter bed by bailing out fluid, decomposed materials sludge etc outside MD land complete all as directed by Engineer-in-charge. . Note 1. Sludege/de-composed materials obtained from cleaning shall be removed outside MD land by mechanical sewage cleaning tanks and disposed off to designated places as ear marked by local bodies. . . Note 2. Rate inclusive of clearing away all grass vegetation, saplings shrubs and trees not exceeding 30cm girth upto 3 mtrs alround the septic tank and removing rubbish upto a distance 50mtrs outside the periphery area.
De-sludging/De-silting of 100 user septic tank including filter bed by bailing out fluid, decomposed materials sludge etc outside MD land complete all as directed by Engineer-in-charge. . Note 1. Sludege/de-composed materials obtained from cleaning shall be removed outside MD land by mechanical sewage cleaning tanks and disposed off to designated places as ear marked by local bodies. . . Note 2. Rate inclusive of clearing away all grass vegetation, saplings shrubs and trees not exceeding 30cm girth upto 3 mtrs alround the septic tank and removing rubbish upto a distance 50mtrs outside the periphery area.
De-sludging/De-silting of 50 user septic tank including filter bed by bailing out fluid, decomposed materials sludge etc outside MD land complete all as directed by Engineer-in-charge. . Note 1. Sludege/de-composed materials obtained from cleaning shall be removed outside MD land by mechanical sewage cleaning tanks and disposed off to designated places as ear marked by local bodies. . . Note 2. Rate inclusive of clearing away all grass vegetation, saplings shrubs and trees not exceeding 30cm girth upto 3 mtrs alround the septic tank and removing rubbish upto a distance 50mtrs outside the periphery area.
De-sludging/De-silting of 25 user septic tank including filter bed by bailing out fluid, decomposed materials sludge etc outside MD land complete all as directed by Engineer-in-charge. . Note 1. Sludege/de-composed materials obtained from cleaning shall be removed outside MD land by mechanical sewage cleaning tanks and disposed off to designated places as ear marked by local bodies. . . Note 2. Rate inclusive of clearing away all grass vegetation, saplings shrubs and trees not exceeding 30cm girth upto 3 mtrs alround the septic tank and removing rubbish upto a distance 50mtrs outside the periphery area.
De-sludging/De-silting of 10 user septic tank including filter bed by bailing out fluid, decomposed materials sludge etc outside MD land complete all as directed by Engineer-in-charge. . Note 1. Sludege/de-composed materials obtained from cleaning shall be removed outside MD land by mechanical sewage cleaning tanks and disposed off to designated places as ear marked by local bodies. . . Note 2. Rate inclusive of clearing away all grass vegetation, saplings shrubs and trees not exceeding 30cm girth upto 3 mtrs alround the septic tank and removing rubbish upto a distance 50mtrs outside the periphery area.
M&L for loose filling with broken bricks in soakage pits, soakage wells .
M&L for demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles etc complete all as specified and directed.
Demolition of Plain cement concrete (unreinforced) n exc 15cm thick but below or above ground level etc complete all as specified and directed.
Demolition of reinforcement cement concerete as cover slab all as specified and directed.
M&L for cement concrete 1:3:6 Type C-2 (40 mm graded aggregate ) 100mm thick and finishing the cement concrete even and smooth without using extra cement etc complete all as specified and directed.
M&L for precast reinforced cement concrete PCC 1:2:4 type B-1 (20 mm graded aggregate) as in manhole/drain cover slabs etc set in CM 1:4 including use and waste of formwork and finishing top surface of cover slab even and smooth using extra cement etc complete all as specified and directed. . (Note : Steel reinforcement shall be measured and paid separately)
M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking hooking ends and binding with and including MS wire annealed not less than 0.9mm dia complete all as specified and directed.
M & L for excavation in trenches n.exc 1.5m wide and n.exc 1.5m in depth and getting out soft loose soil complete all as specified and as directed.
M&L for Cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in foundation filling and mass concrete.
M&L for brick work with sub class 'B' old sized bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 as in man holes etc complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as in surface channels in manholes etc complete all as specified and directed.
M&L for PCC 1:2:4 type -B1 using 20mm graded aggregate as in coping with and inclusive of form work as required etc complete all as specified and directed.
M&L for rendering 10 mm thick in CM 1:4, on fair faces of brick work or concrete surface, finished even and smooth without using extra cement, complete all as specified and directed.
M&L for demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM (Internal dia of pipe 150 mm)
M&L for demolition & breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in CM (Internal dia of pipe 200 mm)
M & L for concrete bed to drain pipes including forming cradles in cement concrete 1:3:6, type C 2 (using 40 mm graded stone agg.) for bore of pipe 150 mm all as specified and as directed.
M & L for concrete bed to drain pipes including forming cradles in cement concrete 1:3:6, type C 2 (using 40 mm graded stone agg.) for bore of pipe 200 mm all as specified and as directed.
M&L for 150 mm dia reinforced concrete pipes class NP2 laid and jointed with collars complete all as specified and directed.
M&L for 200 mm dia reinforced concrete pipes class NP2 laid and jointed with collars complete all as specified and directed.
Disamantling of cast iron pipes of any description with fittings fixed to walls or laid in floors/trenches.
S&F Cast iron (spun pipes) soil, waste and vent pipes 100mm bore in any length with or without ears, with cement joints, fixed to walls complete all as specified and directed.
S&F 100mm bore of pipe Bends (any radius), diminishing pieces or tapers (larger bore measured) with oval access door etc complete all as specified and directed.
S&F 100mm bore Sockets (double) collars for CI pipe etc complete all as specified and directed.
S&F 100mm CI vent cowl all as specified and directed.
S&F 100mm bore Branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches for CI pipes fitted with oval access door etc complete all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length and any description with rubber ring joints fixed to walls etc all as specified and directed.
S&F PVC (SWR) pipes 110mm bore single socketed, in any length and any description with rubber ring joints laid in trenches or in floors etc all as specified and directed.
S&F 110mm bore of pipe PVC (SWR Grade) bends with access door of any radius all as specified and directed.
S&F 110mm bore of pipe PVC (SWR) branch piece, single (single Y) equal or unequal with access door of any radius all as specified and directed.
S&F 110mm PVC (SWR) vent cowl all as specified and directed.
S&F 75mm dia PVC (SWR) grade pipes single socketed in any length including fixing clips/ruuber joints laid in trenches or in floors etc complete all as specified and as directed.
S&F 75mm dia PVC (SWR) grade pipes single socketed in any length including fixing clips/ruuber joints fixed to walls etc complete all as specified and as directed.
S&F PVC SWR grade bends of any radius with inspection door 75mm bore of pipe complete all as specified and as directed.
S&F 75mm bore of pipe PVC (SWR) branch piece, single (single Y) equal or unequal with access door of any radius all as specified and directed.
S&F 75mm PVC (SWR) vent cowl all as specified and directed.
S & F in repairs PVC SWR floor trap with CP grating 75 mm dia of outlet including jointing with solvent cement etc complete all as specified and directed.
M&L for returning filling in foundation trenches with available soil spread and levelled in layers n exc 25cm thick watered and well rammed to a true surface, complete all as specified and directed.
M&L for removal of surplus excavated soil to a distance exc 1.50 Km and depositing outside MD land etc complete all as specified and directed.
M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching internal dia of pipe 150mm etc complete all as specified and directed.
Harsh Infrastructure
AKANKSHA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .