COMPREHENSIVE MAINTENANCE AND MISC B/R AND E/M WORKS AT JCOS/ORS MD ACCN IN ZONE B UNDER AGE B/R-II OF GE EAST MATHURA

Amount

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises compete all as specified and as directed.

M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement motar 1 : 6 complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface of size 450x300x 7-8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick screed bed in in cement motar 1:4 complete all as specified and as directed.

M&L for 25 mm cement concret 1:2:4 type- B0 (using 12.5 mm graded stone aggregate) as in levelling course for floor etc finishing cement concrete surface even and fair without using extra cement compete all as specified and as directed.

M&Lfor Non skid Ceramic coloured tiles 7-8 mm thick (square/ rectangular) area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified & directed.

M&L Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm as in vertical surface like dado or skirting over & including10mm thick in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match

M&L for Cutting chases pinning in, making good to facing where reqd. and pointing in cement mortar 1:3 to ends or edges of landing ,steps, cills, sunshades,selfs lintels etc. and cutting chases for conceled for water tubing or conceled condute wiring etc and making good, cutting n.exc 10cm girth complete all as specified & as directed.

S&F in repair 110mm bore PVC (SWR) bends any radius complete as specified and as directed.

S&F in repair 75mm bore PVC (SWR) bend any radius complete all as specified and as directed.

S&F in repair 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings complete all as specified and as directed.

Taking up or down 20mm dia steel tubing and connections including disconnection of fitting complete all as specified and as directed.

Supplying & Fixing CPVC pipes SDR 11 & Plain CPVC SDR 11 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

Supplying & fixing GI tubing ,galvanised, medium grade 20 mm bore with all fittings and fixed complete to walls and ceiling or laid under floor complete all as specified and as directed.

S&F in repair cast copper alloy chromium plated 15 mm Bib cock with wall flange, cast copper alloy with crutch, screwed down, screwed for iron pipe or for brass ferrule and fixed complete. NOTE:- The minimum weight of item will be 450 gm each

S&F in repair Angular Stop valve/angular cock 15mm bore cast copper alloy chromium plated with wall flange,chromium plated screwed down, high pressure fancy type screwed both end for iron pipe or for unions and fixed all as specified and directed. NOTE:- The minimum weight of item will be 450 gm each

S&F in repair PVC connections 15mm size with PTMT nuts of length 450 mm including fixing complete.

S&F in repair 32 mm dia waste fittings brass chromium plated for glazed ware sink , basin etc with long screwed shanks and fly nuts flange complete

S&F in repair 75mm outlet dia bore PVC (SWR) floor trap plain with grating including jointing with solvent cement

S&F in repair PVC valveless 10 ltr capacity, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S&F in repair kitchen sink with dranage board made of SS 1mm thick with plug washer and wasts coupling , includig bedding in cement mortar to draw & wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm, bowl size 410mm x 330mm x 160mm. complete all aas specified and directed.

S&F in repair water closet squatting pan 'Orissa Pattern'of size 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) with P' or 'S' trap complete incl connection to trap,and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed

S&f in repair Health faucet (ABS body) chromium plated including SS flexible tube 15 mm dia 1.5 mtr and wall hook including making connection and fixed in position complete.

S&F in repair for vitreous china wash hand basin white flat back size 550 x 400 mm including bracket including cutting for and pinning in ends of bracket or eracting stand fixing complete all as specified and directed

S&F in repair Brass chromium plated tubular towel rail 20 mm dia type D 600mm long between flanges fixed to wall complete all as specified.

S&F in repair for stop valve concealed type long shank and cup cast copper alloy chromium plated screwed down high pressure CP fancy type screwed both ends for iron pipe 15mm bore complete. NOTE:- The minimum weight of item will be 450 gm each

S & F 32mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fittings, fixed to WHB, complete.

S&F in repair Grating doom 100 mm dia PTMT (min. weight 25 gms) complete all as specified and directed.

S&F in repair rotational moulded, polythene PVC water storage tank (Cylindrical vertical with closed top) tripple layer white in colour 1000 Ltr capacity hoisted and fixed in position including 20mm brass ball valve and 20 mm tank nipple complete all as specified and as directed.

All as per item serial No above here-in-before but 750 Ltr capacity

All as per item serial No above\here-in-before but 500 Ltr capacity

S&F in repair pillar tap 15mm bore cast copper alloy with fancy type , chromium plated screwed down high pressure long screwed shank and fly nuts for iron pipe all as specified and directed.NOTE:- The minimum weight of item will be 450 gm each

Taking down Chowkhats or frames with shutter without taking off shutters from the frames not exc. 1.5 sqm each complete all as specified and as directed.

Taking down Chowkhats or frames with shutter without taking off shutters from the frames exc. 1.5 sqm but n exc 4 Sqm each complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 sqm and not exceeding 2.0 sqm each complete all as specified and as directed.

S&F factory made single extruded WPC (Wood polymer Composite) solid door/window chowkhats of size 50mmx100mm single rebated comprising of virgin PVC polymer of K value 58-60 calcium carbonate and natural fibers (wood powder /rice husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screw with full body threaded star headed SS screws with full body threaded star headed SS screws having minimum frame densityn of 750 kg/cum screw withdrawal stength of 2200 face &1100 N edges minimum compressive strength of 58 N/mm2 modules of elasticity 900n/mm2 and resistance to spread of flame of class A category with property of being termite /borer pfoof water /moisture proof and fire retardant and fixed in position with MS hold fast /lugs /SS dash fasteners of required and length complete all as specified and as directed

S&F factory made single extruded WPC (Wood polymer Composite) solid door/window chowkhats of size 65mmx125 mm Double rebated comprising of virgin PVC polymer of K value 58-60 calcium carbonate and natural fibers (wood powder /rice husk) and non toxic additives fabricated with miter joints after applying PVC solvent cement and screw with full body threaded star headed SS screws with full body threaded star headed SS screws having minimum frame densityn of 750 kg/cum screw withdrawal stength of 2200 face &1100 N edges minimum compressive strength of 58 N/mm2 modules of elasticity 900n/mm2 and resistance to spread of flame of class A category with property of being termite /borer pfoof water /moisture proof and fire retardant and fixed in position with MS hold fast /lugs /SS dash fasteners of required and length complete all as specified and as directed

S&F Factory made solid panel PVC molded door shutter 28-30 mm thick (style)with 2 or 6 raised panel design with 2mm thick moulded prelam pvc sheet on both face as per specification & drawings.

S&F factory made Solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of M S tubes for top & bottom rails M.S frame shall be covered with heat mouldeded both side prelam PVC sheet , wire gauzed i.e panel will be of wire gauze in lieu of both side prelam PVC sheet the wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be stretched to tighten firmly stile and rails feathered at edges .supplying & fixing in frame at site complete all as specified and as directed.

S&F 200 mm size aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F 200 mm long aluminium anodised handles, cast type complete all as specified and as directed.

S&F 100 mm long extruded aluminium alloy Butt hinges with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as spicified and as directed.

S&F powder coated Anodised aluminium frame for doors, windows(two track sliding window /openable window ), ventilators, partitions etc with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified.

S&F Powder coated (minimum thickness of power coating 50 micron) aluminium window and ventilator, door shutters, including providing and fixing Al hinges /pivot and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular section/appropriate Z Section and other sections of approved make conforming to IS 733 and IS 1285 Fixing wirh dashfastern of required dia and size including necessary filling up the gaps at junctions i.e top bottom and side with required EPDM rubber/neoprene gasket etc aluminium section shall be smooth rust free straight mitred and jointed mechanically wherever required including cleat angle aluminium snap beading for glazing /paneling cp brass /stainless steel screw complete all as specified and as directed.

S&F 4 mm thick Sheet glass, ordinary quality and glazing fixed to frame with rubber beading as required area n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Sheet glass 5.5mm thick, ordinary quality and glazing in square exc 0.5 sqm in each pane Including necessary fixing beads etc. complete all as specified and as directed.

S&F anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design pattern with approved standard section and fixed to the existing window frame with c.p brass stainless steel screw @200 mm center to center including cuttings the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete all as specified and directed

S&F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in position complete all as specified and as directed.

S&F 100 mm size mortice lock of brass, vertical type,4 levers, complete all as specified and as directed.

Taking down Cement plaster from brick walls or concrete surfsce etc incl raking out joints, hacking for key and scrubbing down with water etc all as specified and as directed.

M&L, 15mm thick rendering in CM 1:4 in two layer first layer shall be 10mm and second layer shall be 5 mm thick with water proofing compound to brick/conc wall surfaces trowelled to even & smooth w/o using extra cement.Note :- Liquid WPC shall be measured & paid seprately

Supply only liquid water proofing compound

M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in CM 1:6 and finishing the surface even & fair complete all as specified and as directed.

M&L for rendering 10 mm thick on fair faces of bricks or concrete surfaces as in ceiling surfaces in cement mortar 1:3 finished even & fair all as specified and as directed.

M&L preperation of newly plastered surfaces of walls and applying two coats of oil bound distember over a coat of alkali resistant primer using spray machine, spray hard to receive area to achieve excellent application using limited manpower over a coat of wall care putty not less than 1mm thick complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint white or tinted over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

M&L for preparation of old decorative surfaces of walls and applying one coat of oil bound distemper complete all as specified and as directed.

M&l for preparation of old surfaces of walls and applying one coat of whitewash complete all as specified and as directed.

M&L for preparation of old plastered surface of ceiling and applying one coats of white wash all as specified and as directed.

M&L for Providing 1 mm thick wall care putty on surfaces of wall as specified and directed by engineer in charge.

M&L for preparation of old plastered surface of walls and applying one coats of cement base paint complete all as specified and as directed.

Demolition of Concrete (unreinforced) in ground floors or other than ground floor and pavings n exc 15 cm thickness below or above ground level unreinforced.

M&L for 75mm thick Cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified & directed.

M&L for 60 mm machine pressed precast concrete interlocking paver blocks any shape and size confirming to IS 15658-2006 , M-35 Grade with grey cement and no pigments complete all as specified and as directed by Engineer-in-Chareg

M&L for sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed.

M&L non skid coloured cermic ENDURA tiles n. exc. 0.11 Sqm 10mm thick set and jointed in neat cement slurry & pointed with coloured cement to match in floor over 15mm thick screed bed in CM 1:4 .

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded in natural ground/ PCC/ Brick work and making good disturbed area complete all as specified.

Dismantling galvanised barbed wire fencing any size,

Excavation in post holes (or similar holes ) each n exc 0.5 cu m getteing out as soft /loose soil rerurning filling in and ramming earth or broken rubble mixed with earth around in layer not exceeding 25 cm complete all as specified.

M&L for PCC 1;3:6 type C-2 using 40 mm graded stone aggregate as in foundation & mass concrete etc complete all as specified.

S&F Mild steel work as in hand rails , half round or other section, balusters running bars, nosing to steps, wind ties, posts and struts in fencing incl cutting tops to shape as required, drilling holes , noching for wire , flat iron fillets for securing wiremesh etc., incl all necessary drilling, bolting or riveting etc & similar work conforming to Fe-290 Gde E-165 and all as specified.

S&F Mild steel screw bolts (machine made) dia of neck 5 to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed

S&F mild steel round bars 10mm dia cut to length, bent to shape as required and fixed in fencing confirming to Fe 410-Wor Fe 290 complete all as specified.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire

Supply only MS galvanised chain link wire mesh 100mm x 100 mm size of mesh as in fencing with 3.15mm dia galvanised steel wire all as specified.

S&F galvanised 2 strand steel barbed wire 2.24mm, dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provn of galvanised mild steel wire staples or steel pins all as directed. (Each line wire to be measured)

M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic paint over and including one coat of red oxide primer complete all as directed

M&L for Preparing new steel surfaces of any description .n. exc 10 cm width or girth and applying two coats of synthetic paint over and including one coat of red oxide primer complete all as directed

Taking down carefully aluminum/copper point wiring (light ,fan, socket any type, power, bell etc. ) complete including fixtures & fittings (such as ceiling rose, socket, Pendent, regulator, light fittings etc) and removing the material from site and making good the disturbed surfaces of walls ceiling etc complete all as directed. ( Note: Credit for above items should be made as per credit Schedule separately)

Taking down carefully by submain wiring of any type complete and making good disturbed sufaces to match with the existing surfaces all as directed by Engineer-in-Charge.

Taking down old unserviceable existing SPN/TPN DBs / enclousers any size and type / any descriptions as iron sheet scrap including MCB any type / size and making good disturbed surface / wall as per existing complete all as specified and directed

M & L for Point wiring with 1.5 Sqmm (nominal area) single core PVC insulated unsheathed (FRLS) cable, multi-stranded, 1100 volts grade copper conductor, in universal colour code with & including suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) including with modular flush metal boxes with modular cover plates & frame for mounting modular switches, sockets, regulators etc or including sunk cast iron /pressed steel/terminal boxed for mounting flush type switches/sockets etc with 3 mm thick phenolic laminated sheet covers and including earth wire of PVC insulated (FRLS) copper conductor multistranded of 1.5 Sqmm size in green colour complete all as specified in current SSR Part-I & II & directed by the Engineer-in-Charge as described below (from item no 89 to 93):-

a) One light/ fan point controlled by one way switch 5 amp complete.

c) One 3 pin 5 Amps socket point controlled by one way switch on same board.

d) One 3 pin 5 Amps socket point controlled by one way switch on independent board.

e) One bell point controlled by one push button.

f) One light point controlled by two 2-way switches.

All as per item No. 88 but for 3 pin / 5 pin 16 Amps sockets outlet with 4 Sqmm PVC insulated & unsheathed (FRLS) copper conductor cable independent Point wiring complete all as specified and as directed.

Supply and Fixing Modular switch 6 Amps single pole one-way, 1 Module complete.

Supply and Fixing Modular bell Push switch 6 Amps with indicator single pole one-way, 1 Module .

Supply and Fixing Modular switch 16 Amp single pole one way,1 Module all as specified.

Supply & Fixing Modular fan Regulator electronic step type complete all as specified.

Supply and Fixing Modular socket 2-in-1, 5 pins 6 Amps, combined 2 Module complete all as specified.

Supply and Fixing Modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete.

Supply and Fixing Modular switch 6 Amps single pole two-way, 1 Module complete all as specified.

Supply and Fixing in replacement switch piano type , SP, one way, flush type 5 Amps complete all as specified.

Supply and Fixing in replacement socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified.

Supply and Fixing in replacement socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified.

Supply and Fixing in replacement switch piano type , SP, one way, flush type 15 Amps complete all as specified.

Supply and Fixing in replacement bell push siwtch piano flush type, SP, one way, 5 Amps complete all as specified.

Supply and fix in repair ceiling rose surface bakelite 65mm x 50mm three terminals complete .

Supply and fix in repair lamp holder, PVC / polycarbonate type with back plate suitable for batten fittings complete all as specified.

Supply and fix in replacement mini MCB enclosure including DP 16 amp, type 'C' curve complete.

Supply and fix in replacement Bell Ding dong type, 230 Volts complete with connection.

Supply and Fixing in replacement fan Regulator piano flush type (socket type as per existing), electronic step type complete all as specified.

M & L for Sub Main Wiring wiring with two runs single core 4 Sqmm PVC insulated unsheathed (FRLS) cable with multistranded, 1100 volts grade copper conductor drawn in suitable size of rigid non-metallic PVC conduit (not less then 20mm dia med gd) and its all accessories complete concealed in wall/roof incl cutting & chases( making good all to the disturbed surfaces as per existing) with and including 4 Sqmm copper green colour earth wire all as specified and directed by Engineer-in-Charge.(Note: Two runs of 4 Sq mm (P&N), one run of 4 Sq mm earth wire & One run of PVC casing and caping will be measured as one RM).

All as per item no 112 but for 6 Sqmm

All as per item no 112 but for 10 Sqmm

Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted LED batten tube light complete fitting 1x 20 watt LED Tube fitting with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K, >100 Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply & fixing in repair indoor decorative ultra slim surface /Wall mounted T5 LED batten tube light complete fitting 1X9 watt LED Tube fitting (size within 600x25x40 mm) suitable for mirror light with polycarbonate channel housing & integrated electronic driver,energy efficient, 140V-270 volts,co- related colour temperature (CCT) of 6500K,>100Lm/Watt complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.

Supply & fix in repair surface mounted bulk head LED light fitting, IP66 protection, including 10 watt LED lamp complete with all accessories and connection complete all as specified and as directed.

Supply and fix LED 9 W suitable for normal holder (Base Cap B22) complete.

Supply and fix LED 7 W suitable for normal holder (Base Cap E14) complete.

Supply and install in replacement of 30 W LED building security light fitting with lens & driver, powder coated pressure die cast aluminium, top opening and maintainable with heat resistance toughened glass, built-in Short-Circuit Protection, Over voltage Protection and Surge Protection, IP-65 proction with luminaire efficiecy of greater than 80Lumen/Watt, Colour rendering (CRI) of ≥ 70 and co- related colour temperature (CCT) of 5700K (±500K) . The luminaire should have 10 KV surg protection, PF ≥ 0.9 and total harmonic distortion of THD ≤ 10%, voltage range of 140-280V including all connections complete.

Supply & fix in repair recess type, 35/36 watt LED panel light (600x600 mm) complete with fittings integrated electronic driver,energy efficient, 230 volts,co- related colour temperature (CCT) of 6500K, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete.

Supply & fixing LED Decorative bed side light fitting 3W, flexible arm type complete with all accessories, On /off inbuilt switch and including connection complete all as specified and as directed. Make : Havells or equivalent to Philips / Bajaj / CG or as directed as per site

Supply & fixing in repair indoor wall mounted fitting, brushed nickel finishfixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts - 2 Nos all as directed at site. Make: Havells FLORETINE WL 2LS B22 SS or equivalent

S&F in repair LED post top light fitting 30W IP-65 rated completeall as specified and directed. Make: Surya Cat part No SLE PT 30W-ETPP or equivalent.

S&F in repair LED Round/square recess mounted slim downlighter 15/18 watt, integrated electronic driver, co- related colour temperature (CCT) of 6500K complete all as specified.

M&L for building security light bracket made out of 40mm dia light grade GI pipe of 1.2 m length bent to required shape suitable for fixing street light fitting on Steel tubular pole/wall including two Nos clamps made out 40mm X 6mm flat with suitable nuts and bolts including two coats of aluminium paint over a coating of red oxide primer complete all as directed taking down old unserviceable bracket as scrap any size / description.

S&F in replacement MCB distribution board, SPN 12 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail , cable ties for cable management, 240 V, complete all as specified.

All as per item no 127 but for SPN 8 Way

All as per item no 127 but for SPN 4 Way

Supply & fix in replacement MCB SPN 40-63 Amps,' C' series , bracking cap10KA, 240V complete.

Supply & fix in replacement of MCB SPN 16-32 Amps,' C' series , bracking cap 10KA, 240V complete.

Supply & fixing in replacement of MCB SP 6 - 32 Amps, ' C' series ,bracking cap 10KA, 240V complete.

Supply and fix in replacement SP enclosure with a two pin and earth plug and socket complete with SP MCB of rating 20 Amps, 240 Volts with all connection complete all as specified and directed.

Supply & fix in replacement metal clad SPN plug top 20 Amp for fixing on AC Box complete.

Supply and fix modular MCB DP 16 Amp, ' C' series, 240 V complete all as specified and directed.

S&F in repair Plastic Surface mounting box 1 / 2 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

S&F in repair Plastic Surface mounting box 3 / 4 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

S&F in repair Plastic Surface mounting box 6 / 8 module gang box for mounting switches, sockets, fan regulator etc complete all as directed by Engineer-in-charge.

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 3 way to 6 way including removing & re-fixing of existing switch / socket and complete connection all as directed. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately.

Supply & replacement of 3 mm thick laminated mica sheet top cover suitable for switch board 8 way to 12 way including removing & re-fixing of existing switch / socket and complete connection all as directed. Note :- Replacement of unserviceable switch / socket / regulator shall be measured & Paid separately.

M&L for Modular metal flush box 1/2 Module complete all as specified and directed.

M&L for Modular metal flush box 3 Module complete all as specified and directed.

M&L for Modular metal flush box 4 Module complete all as specified and directed.

M&L for Modular metal flush box 6 Module complete all as specified and directed.

M&L for Modular metal flush box 8 Module complete all as specified and directed.

M&L for modular white cover plate with frame, 1 / 2module complete all as specified and directed.

M&L for modular white cover plate with frame, 3 module complete all as specified and directed.

M&L for modular white cover plate with frame, 4 module complete all as specified and directed.

M&L for modular white cover plate with frame, 6 module complete all as specified and directed.

M&L for modular white cover plate with frame, 8 module complete all as specified and directed.

M&L for point wiring with 1.5 Sqmm (nominal area) FRLS PVC insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including PVC Casing and Caping and its all accessories of suitable size on wall/roof surfaces (making good all to the disturbed surfaces as per existing) including one run of 1.5 sqmm PVC insulated copper conductor cable green in colour for continuous earthing including gang box/2.0mm thick MS terminal box as per site requirement for fixing switches, sockets, fan regulators etc fixed to wall with 3mm thick laminated sheet top cover complete all as specified for item no 152 to 154:-

a) One light point/ fan point / bell point controlled by one switch

b) One 3 pin 5 Amps socket point controlled by one way switch on same board.

c) One 3 pin 5 Amps socket point controlled by one switch on independent board

All as per item No.151 here-in-before but with 4.0 Sqmm for 3 pin 15 Amps socket point controlled by one switch on independent board and 4.0 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing switch piano type , SP, one way, flush type 5 Amps complete all as specified.

Supply and Fixing socket out let 2 in 1 flush type 5 pin 5 Amp complete all as specified.

Supply and Fixing socket out let 2 in 1 flush type 3 pin 5 & 15 Amp complete all as specified.

Supply and Fixing switch piano flush type 15 Amp, SP, 240 volt, one way complete all as specified.

Supply and Fixing fan Regulator piano flush type, electronic step type complete all as specified.

Supply and Fixing in repair modular switch 6 Amps single pole one-way, 1 Module complete.

Supply and Fixing in repair Modular switch 16 Amp single pole one way,1 Module all as specified.

Supply & Fixing in repair modular fan Regulator electronic step type complete all as specified.

Supply and Fixing in repair modular socket 2-in-1, 5 pins 6 Amps , combined 2 Module complete.

Supply and Fixing in repair modular socket 2-in-1,3 and 5 pins 6 /16 Amps, combined 2 Module complete.

Supply and fix SP enclosure modular type, with a two pin and earth plug and socket complete with Single Pole MCB of rating 20 Amps, 240 Volts complete with all connection as directed.

Taking down and Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Note:- Old unservieceable item shall be deposited to E/M store yard.

All as per item no 167 but for 1400 mm sweep

Taking down and Supply and Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers . Note:- Old unservieceable item shall be deposited to E/M store yard.

All as per item no 169 but for 250 mm sweep

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m

All as per item no 171 but for 250 mm sweep

Supply & fixing powder coated CRCA steel sheet MCB distrbution board, IP-43 IK-09 protection, double door recess mounted, triple pole and neutral 4 way with 100 Amps rated copper bus bar, type complete all as directed.

Supply & fix in replacement of MCB TPN 40 to 100 Amps,' C' series , bracking cap 10KA, 415V complete including taking down old MCBs all as specified and directed.

S&F TP&N Vertical Loadline distribution board, 4 Way, Double door, sheet steel, phosphatised, powder painted with bus-bar 200Amp, neutral link, earth bar and din rail ,blanking Plates, cable ties for cable management, 440 V, 4 way complete all as specified including fitting suitable for MCBs with connections complete all as specified and directed. Note : -MCB & MCB /MCCB DBs shall be of same make and measured and paid seperately under respective items of Sch A. DB shall be fixed in flush pattern by cutting the wall and making good disturbed surface as pe directed & rate shall be included in the items.

Supply & fix in replacement of MCCB 160 Amps, breaking cap 25 KA, 4 Pole, 415V complete including taking down old MCBs all as specified and directed.

Supply & fix in replacement of MCCB 125 Amps, breaking cap16 KA, 4 Pole, 415V complete including taking down old MCBs all as specified and directed.

Supply & fix in replacement of MCCB 100 Amps,breaking cap16KA, 4 Pole, 415V complete including taking down old MCBs including taking down old MCBs all as specified and directed.

Supply & fixing in repair indoor wall mounted fitting, brushed nickel finishfixture with opal glass diffuser, with LED retrofit bulb of capacity 09 watts all as directed at site. Make: Phillips comet 30575 or equivalent

Earthing complete all shown as electrical plate No -03 of MES Sch part -I as specified and as directed including the following:- (i) GI earth plate of size 60x 60cm x6.0mm thick burried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.50 metres below ground level. (ii) Earth plate surrounded by and packed with charcoal and common salt in alternative layers. ( n.exc 15 cms each layer) (iii) 4 mm GI wire from earth plate to MCB DB/machinery including necessary GI bolts, nuts check , washers, thimbles etc. (iv) 20 mm bore, light grade, Gi pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horizontaly to the earth pit. (v) 15 mm dia bore G. I. medium grade pipe for protection of earth wire. (vi) Cement concrete chamber of PCC (1:3:6) type C-2 using 40mm graded stone aggregate. The chamber shall be constructed one metre away from edge of earth pit . (vii) 50 mm thick precast cover of reinforced cement concrete(1:2:4) type B-1 using 20mm graded stone aggregate with steel rainforcement 8 mm dia mild steel TMT bar @ 10 Cm c/c both ways and MS angle iron 50x50x6mm frame including two coats of painting over a coat of red oxide to exposed steel surfaces with suitable handle to lift the cover. (viii) Excavation in soft/loose soil, returning filling & removal of surplus soil to a distance of 50 m as directed.

shyam construction (BID ID -3496063)

M/s M S CONSTRUCTION (BID ID -3503013)

B S ENTERPRISES (BID ID -3496483)

ISHWAR ENTERPRISES (BID ID -3495281)

M/S ANIL KUMAR (BID ID -3494182)