PROVISION OF ACESS PATHWAY AND ENTRANCE PORCH FOR BLDG NO P44 INCLUDING SPECIAL REPAIRS TO FLOORING AND WINDOWS IN LABS AND OFFICES OF RAQAS (MBI) AND SPECIAL REPAIRS TO SKG AR AL ATE AND ALH WORKSHOPS IN P26 BLDG AT INS SHIKRA UNDER GE NW NOFRA

Amount

Excavaton in trenches not exc 1.5 mtr in depth and n exc 1.5 mtr in widht and getting out in hard/ dense soil complete all as specified and directed.

Surface excavation n. exc 30cm deep and averaging 15cmm deep and getting out in hard/ dense soil complete all as specified and directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm.

Removing excavation material exceeding 1.50 km but n exceeding 15 km and depositing where directed.

M&L for cement concrete (1:4:8) type D2 (using 40mm graded stone aggregate)in foundation filling and mass concreting complete all as specified and directed.

M&L for RCC (design mix) M-30 (using 20mm graded stone aggregate) as in footing, foundation beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed.

M&L for RCC (design mix) M-30 (using 20mm graded stone aggregate) for slabs supported on walls, beams and column in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for RCC (design mix) M-30 (using 20mm graded stone aggregate) roof beams, cantilevers, bressummers lintels over 1.5m span complete all as specified and directed.

Material & labour RCC (design mix) M-30 (using 20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts complete all as specified and directed.

Material & labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips.

Material & labour for mild steel TMT bars 5mm dia and over upto & including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clip complete all as specified and directed.

Use and waste of Formwork to sides of concrete foundations, footings, bases of columns, Plinth Beam, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter fair finished surfaces.

Use and waste of flat Formwork to sides of pillars, posts, struts, piers, columns and stanchions fair finished surfaces.

Use and waste of Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc fair finished surfaces.

Use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (horizontal or sloping) fair finished surfaces.

Use and waste of Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide fair finished ,complete all as specified.

M&L 16 to 20 mm thick Granite (of any type) work (table rubbed and polished) for wall lining or laid in floor 15mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding complete all as apecified and directed.

Demolition of reinforced cement concrete of any description and in any position (reinforcement cut as required to facilitate demolition whenever required), complete all as specified and as directed.

Dismantling timber in fillets, rails, posts, rafters, purlins etc. under 40sqcm section, in any position, complete all as specified.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, any description including Nainital or similar pattern roof coverings or as in valley gutter complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

Material & labour for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified.

M&L for Rendering 15mm thick cement plaster in cement mortor 1:4 on brick or concrete surfaces mixed with water proofing compound @ 2% by the weight of cement (shall be paid under respective schedule), surfaces to be finished even and smooth without using extra cement, complete all as specified.[NOTE- WPC shall be measured and paid separately]

Supply only integral water proofing compound.

M&L for Rendering 10mm thick cement plaster in cement mortor 1:3 on ceiling surfaces, surfaces to be finished even and smooth without using extra cement, complete all as specified.

M&L for Preparation of newly plastered surfaces of ceiling and applying 2 coats of oil bound distemper over a coat of primer on 2mm thick interior wall care putty complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of wall and apply two coats of Acrylic emulsion exterior paint (all weather proof) of required shade over a coat of exterior primer, complete all as specified.[Note :-Scaffolding deemed to be included in quoted rate,Necessary safety precautions need to be taken.]

Material & labour hardcore of broken stone or boulders of guage exceeding 63mm but not exceeding 100mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolled/rammed to a true surface

M&L for 100mm thick PCC 1:4:8 type D2 Using 40 mm graded stone aggregate as in sub base incl complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block having glossy finish shape and size as approved by GE confirming to IS 15658-2006 of 80mm thickness, M-40 Grade of with grey cement and pigments laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compaction by means of surface vibrator complete all as specified and directed.

Material and labour for PCC (1:2:4) type B1, using 20mm graded stone aggregate as in coping, kerb stone or edges of paver blocks or similar places etc complete all as specified and directed.

M&L for Roof tiles, Mangalore pattern, interlocking at side joints, colour and pattern as approved by GE and laid in 20mm thick CM 1:4, joint to be fixed and filled with white cement adding pigments to match the shade of tiles complete all specified and directed.

M&L for Ridge or hip tiles suit Mangalore pattern of roofing tiles, colour and pattern as approved by bedded and jointed in cement mortar in 20mm thick CM 1:4, joint to be fixed and filled with white cement adding pigments to match the shade of tiles complete all specified and directed.

M&L for false ceiling made out of 600x600x 4 to 6 mm thick ceiliing board / tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x0.63mm and cross tee of size 23.50x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/clits/pin hook etc. for securing frame work to ceiling to the snap grid all as directed by Engr-in-charge including provn of necessary holes / cuttings for providing light/fan as required including making necessary recesses / projected pattern complete all as specified and as directed.

S&F rolled sections as in main and cross beams, hip and jack rafters, purlins and the like etc where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified incl all necessary scaffolding etc.

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame)

Taking down chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutters from the frame) , complete all as specified.

M&L Granite (of any type) work (table rubbed and polished) 20mm thick in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite., and nosing /rounding to edges of stone slabs one edge,all as specified and directed .

S&F powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed.

Supply & fix aluminium anodised grill (minimum thickness of anodising 15 micron) with and including suitable aluminium anodized 'F'/'H' section frame as required with aluminium rebated/screwed attachment complete all as specified and directed complete all as specified and directed. [Note:- Aluminium grill shall be of Deco grill of M/s ELESAR FOCCHI Ltd as per Design No DG 102, 7.50mm x 6.0mm and weight shall not be less than 3.131Kg/Sqm or approved design.]

S&F Aluminium Wire Cloth 0.45mm niminal dia with 1.40mm average width of aperature, fixed with aluminium wire staples, complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceble tiles to store and rubbish off the permises.complete all as specified and directed.

M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointing in white or coloured cement to match incl 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for light shade coloured vitrified ceramic tiles 10 mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 Sqm as in skirting etc set and jointed in neat cement slurry and pointee in white or coloured cement to match incl 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water, complete all as specified.

M&L for rendering 15mm thick cement plaster in cement mortor 1:6 on brick or concrete surfaces in patches, surfaces to be finished even and smooth without using extra cement, complete all as specified.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat internal primer on putty of required thickness complete all as specified and directed.

M&L for preparation of old plastered surface of wall and applying one coats of oil emuslion distemper complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators,sockets,light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M & L for Point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated sheathed copper conductors 1100 volts grade drawn through & including PVC non-metallic conduit/double locked casing caping ISI marked with accessories fixed in wall/ceiling/truss including cutting chases, pinning in etc with PVC non metallic ISI marked terminal boxes concealed wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specifed and directed.

(a) One light point controlled by one switch SP one way.

(b) One ceiling fan point controlled with one 5A switch.

(c) One exhaust fan point controlled with one 5A switch.

(d) One 3 pin socket outlet 5Amps on independant board.

(e) One 3 pin socket outlet 5Amps on same board with other switches.

Material and Labour point wiring for 15 Amps socket complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic double locked casing and caping including PVC bend, tee joints etc as per site requirement, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly complete all as specifed and directed.

S&F Modular Switch , 6Amp, One way, 1 module, ISI marked complete all as specified and directed.

S&F Modular Switch , 16Amp, One way, 1 module, ISI marked complete all as specified and directed.

S&F Modular Socket , 6 Amps, 2/3 pin combined 2 module, ISI marked complete all as specified and directed.

S&F Modular Socket , 16Amps, 6 pin combined 2 module, ISI marked complete all as specified and directed.

S&F ceiling rose surface bakelite with ISI mark, three terminals complete all as specified and directed.

S&F Modular white cover plate with Frame 3 Module, ISI marked complete all as specified and directed.

S&F Modular white cover plate with Frame 4 Module, ISI marked complete all as specified and directed.

S&F Modular white cover plate with Frame 6 Module, ISI marked complete all as specified and directed.

S&F Modular white cover plate with Frame 8 Module, ISI marked complete all as specified and directed.

S&F Modular white cover plate with Frame 12 Module, ISI marked complete all as specified and directed.

S&F Modular white cover plate with Frame 18 Module, ISI marked complete all as specified and directed.

S&F Modular metal flush box 3 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

S&F Modular metal flush box 4 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

S&F Modular metal flush box 6 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

S&F Modular metal flush box 8 module , ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

S&F Modular metal flush box 12 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

S&F Modular metal flush box 18 module, ISI marked and including cutting hole in wall / ceiling/piller etc and making good surface complete all as specified and directed.

Supply and fixing integrated LED batten 20 Watt, 4 feet long, full white in Engineering plastic battern with white acrylic cover with built in electronic driver, pre-wired and connecting up with twisted twin core flexible copper wire of 0.5 sqmm from ceiling rose to connector of fitting including taking down existing unserviceable light fitting of any description complete all as specified and directed.

S&F Ceiling light 36 W 2X2 ft recess mounted led ultra slumceiling light with extrruded aluminum housing and milky diffuser LED ultra slim panel complete all as specified and directed.

S&F modular Fan step regulator, 120W - 2 module complete all as specified and directed by Engr in Charge.

S&F Plug and Socket enclosure, in sheet metal enclosure with MCB, DP 20 Amps 240 Volts complete with metal clad socket complete all as specifed and directed.

S&F Plug and Socket enclosure,Triple pole and earthencolsure with a threepin and earth plug with socket complete with one triple pole MCB 32 Amp complete all as specifed and directed by Engr in Charge.

Supply and fix submain wiring with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC casing and caping of suitable dia, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing. [Note :- (i) Two runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM.] .

S&F DB 8 way Double door SPN type, 240 volt having protection IP-42, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed.

Supply and fixing MCB SPN 40 to 63 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) and current carrying capacity in the MCB DB complete with connection testing and commissioning complete all as specifed and directed by Engr in Charge.

S&F MCB SP 06-32 Amps,240 volts 10 KA rating complete all as specified and directed.

M&L for PCC 1:3:6 type C 2 using 40 mm graded stone aggregate block masonry with solid block, exc 10 cm in width and setting in mortar complete for coping of pole including necessary from work and fair finish to the exposed surface area without using extra cement complete all as specified and directed by Engineer-in-Charge.

Supply and fix FRP type looping box of size 250 x 250 x 100 mm including necessary arrangement to fix the looping box with suitable nuts, bolts,washers flat iron etc complete all as specified and directed by Engineer-in-Charge (a) MCB, 6 to 32 Amps, SP (10 KA) (B serires)-01 No.

Supply and fix pristine gen 2 CRCA housing and screw less frame structure with PMMA diffuser LED clearroom luminaire (2x2) recess mounted bottom opening variant with IP 54 protection complete all as specified and directed by Engr in Charge.

Supply, laying, commisssion & testing XLPE insulated armoured LT cable, 110 Volts grade with aluminium conductor of size 3.5 core 25 Sqmm laid in trenches/ through pipe/ ducts or fixed on wall etc complete all as specified and directed by Engineer-in-Charge.

Supply and laying high density poly-ethylene pipes (HDPE) of pressure 6 kgf/cm2 pipe, 63 mm dia for laying of cable protection complete to walls/ trenches/ floor/ ceilings complete all as specified and directed by Engineer-in-Charge.

Supply & install, testing and commissioning of outdoor type cubicle panel board, 415 V, 3 phase, 4 wire, aluminium bus bar of rating 200 Amps, made out of 3 mm thick CRCA sheet , factory fabricated , CPRI approved , powder coated(seven tank processed) with approved shade ,dust and vermin proof , provn for ventilation , angle iron frame and four legs of 50 x 50 x 6 mm thick angle iron , grouted on PCC foundation of height not less than 30 cm from the ground level , grouting properly and of suitable size to accomodate the items mentioned below and having seperate compartment /chambers for cable gallery, cable glands, cable lugs, bus bar, MCCB fixed vertically with bus bar and panel both side (front and back) openable etc all as specified and comprising of following including necessary PCC work, cable connections to the MCCBs digital multifunction meter and cable lugs etc :- (a) MCCB 4 Pole, 415V, 50Hz adjustable magnetic & thermal type, 100 Amps with breaking capacity 16KA. - 01 No. (Incoming). (b) MCCB 4 Pole, 415V, 50Hz adjustable magnetic & thermal type, 63 Amps with breaking capacity 25KA. -02 Nos (Out going). (c) Phase indicating lamps LED type ( Red , Yellow, Blue) - 02 set

Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 25 x 4 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 5 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and directed by Engineer-in-Charge.

Supply and fixing ceiling fans complete with blades, down rods with safety GI wire connecting up to fan hook, electronic regulaor modular type and accessories , 230 volts , 1200 sweep. Min air delivery 210 CFM with wervice value 5.0 BEE. Five star rated with brushles diret current motor 26 W, minimum rated speed 350 RPM, service value 8.6, starting voltage 120 V maximum and connecting up including provision of flexible 3 core copper cable complete all as specified and directed.

S&F of New LED Bldg security light 45 Watt indus series powder coated pressure die cast aluminium high power LED bldg security light with heat resistant toughned glass with lens with IP66 Protection including 40 mm dia pipe bracket fixing on wall at any height with 02 nos of MS clamp of suitable size,complete all as specified and directed.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp. all as specified and directed by Engineer-in-Charge.

Supply and fix Glow Sign board showing COMMANDING OFFICER name and ADDRESS with radium letter of size 7 x 3 ft covering complete lentgth of gate alongwith with 06 Nos of 20 W LED weather proof IP 65 tube light with complete wiring circuit and control switch including angle iron frame work of suitable size hold the board and acrlylic sheel complete all as specified and directed by Engr in Charge.

Supply and fix 8W led bolard Cone NXG Series with touch of aesthetic innovative design with uniformally with its diffuser at the upper portion acts a beacon of path guidance in a landscape environment with robush IP 65 rating including foundation nut botls complete all as specifed and directed by Engr in Charge.

sunenterprises (BID ID -3084681)

Bright Construction Co (BID ID -3087940)