Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹12,300
Closing Date
29 Jun 2026, 9:30 pm
Similar tender results from the same govt authority in the past 3 years.
Rural Development and Panchayat Raj Department
Building repairs of the Government Pre-University College, Savanoor, Kadaba Taluk
308063
RDPR/2026-27/BD/WORK_INDENT27490
Open
Buildings
RDPR Division Office Mangaluru
5 documents required · 5 mandatory
₹500
₹12,300
20 Jun 2026
20 Jun 2026
24 Jun 2026
Building repairs of the Government Pre-University College, Savanoor, Kadaba Taluk
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking to the appropriate disposal area as per direction of En...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with, stiles and rails of 35mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dr...
Providing and fixing factory made pre fabricated non-monolithic Premium R.C.C. Door Frames factory manufactured in separate parts and assembled at bolts nuts system with mechanical table vibrating as ...
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate sections and other sections of approved make conforming...
Aluminium composite panel for Straight portion
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...
Cudddapah slab 2.5cms thick
Demolishing cement concrete manually/ by mechanical means including disposal of material to the appropriate disposal area as per direction of Engineer-in-charge.
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying Vitrified tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to give an e...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Providing and fixing plain multipurpose cement board(Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete. 6 mm thick Cement fiber board
Providing and fixing powder coated aluminium work (minimum thickness of powder coating 50 micron) consisting of tee/ angle sections, of approved make conforming to IS : 733 in frames of false ceiling ...
Supplying of recess mounting non integral type.LED w luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, Power LED swith CCT6500 degree K,CRI ...
Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 g...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Notification-11.pdf
Others - NOTIFICATION • 1.59 MB
MDP Order_0001.pdf
Others - MDP ORDER • 3.69 MB
kw-1 new.pdf
Tender Document • 0.60 MB
Download all tender documents and submit your bid