WELCOME MAINTENANCE AND OTHER MISC WORK IN OFFR MD ACCN IN ZONE-IV UNDER AGE B/R-IV OF GE (SOUTH) MEERUT CANTT

Amount

Supply & fix in repair Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed .

Supply & fix in repair 3mm thick sheet glass, ordinary quality glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane complete all as specified and directed.

Supply & fix 30mm thick flush shutter, solid core construction, with block board core and plywood face panels commercial type on both side complete all as specified and directed.

Supply & fix mild steel butt hinges 100mm size medium weight, cold rolled complete all as specified and directed.

Supply & fix 125mm size aluminium alloy handles cast type anodized complete all as specified and directed.

Supply & fix 150mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed.

Supply & fix 250 mm long Aluminium alloy, Sliding door bolts, with hasp, staple and fixing clips of sheet, cast or extruded section and fixing bolts of extruded section or cast aluminium alloy complete all as specified & directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

Supply & fix solid PVC door frame of size50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tales and complete all as specified & directed.

Supply & fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 156 of SSR 2010 (Part-II) complete all as specified and directed.

Supply & fix butt hinges 100mm long stainless steel complete all as specified and directed.

S&F in repair pre-laminated particle board 18/19mm thick, interior grade, pre-laminated one side with decorative choice laminations and other side balancing white laminations, fixed with nails/screws to timber frame work as in cupboard/shelves complete all as specified and directed.

Supply & fix in repair 15 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified & directed.

Supply & fix in repair 20 mm bore, tubes medium grade, galvanized with all fittings and fixed to walls and ceiling or laid in floors including testing complete all as specified and directed.

Supply & fix in repairs pillar taps with swan neck , fancy type cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered “hot” or “cold” with long screwed shanks and fly nut screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix in repairs Fancy type Long body Bib Cock cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm bore, complete all as specified & directed.

Supply & fix in repair wall mixer brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes with telephonic with crutch (Provision for hand shower) complete all as specified and directed.

Supply & fix in reapir 15mm bore Angular Cock/Stop valve cast copper alloy fancy type chromium plated, complete all as specified and directed.

S&F in repair 15 mm bore concealed stop cock, chromium plated, cast copper alloy, screwed down with crutch or butterfly handle screwed both ends, including flench complete all as specified & directed.

Supply & fix in repairs chromium plated shower roses with swivel joints of 75mm size complete all as specified & directed.

S&F in repair CP brass soap dish complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe complete all as specified and directed.

S&F in repair 15 mm dia brass chromium plated sink mixture, fancy type with swan neck with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe complete all as specified and directed.

Supply & fix in repair 20 mm bore PTMT ball valves, high pressure with polyethylene float and fly nuts complete, screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&f Sheet in repair glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix in repair glass corner shelf fancy type made of 6 to 7 mm thick sheet glass of size 250mmx250mm fixed with chromium plated brackets complete all as specified and directed.

Supply & fix in repairs vitreous china squatting pan of pattern orrisa size 580mm x 440mm, white with “P” or “S” trap, including integral foot rests any pattern including connections to trap and flush pipe etc including making good to floor to match the existing and filling of white cement complete all as specified & directed.

Supply & fix in repairs vitreous china wash down water closet Pedestal pattern white inclunding making good the existing floor , filling of white cement complete all as specified & directed.

Supply & fix in repairs PVC low level flushing cistern of 9-10 ltrs capacity, ISI Marked, white, symphonic action type with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore, suitable for low level cistern complete all as specified & directed.

Supply & fix in repar white plastic seat cover for W.C.(E.T.) white including M.S. CP or aluminium hinging device complete all as specified and directed.

S&F in repair CP brass jet spray incl. 1.5m long flexible pipe with hook of superior quality complete all as specified and directed.

S & F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in complete all as specified and directed.

Supply & fix in repairs PVC connections of 450mm long of suitable for 15mm dia iron pipe including PTMT nuts complete all as specified & directed.

Supply and fix in repairs PVC waste pipes of 40/32mm bore suitable for wash hand basins/sinks complete all as specified & directed.

Supply & fix in repairs steel C.P. grating 100/125 mm dia waste pipe hole fitted as required at site including filling of white cement and making good the existing floor complete all as specified and directed.

S&F in repairs Towel rod 900 mm in Length in mounted on wall including screws complete all as specified and directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity, three layered (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

All as per item No 38.00 here-in-before but 1000Ltr capacity complete all as specified and directed.

Material & labour Non skid coloured tiles of size 600x600x7-8mm thick, coloured, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor laid over and including 15mm thick cement screed bed of CM (1:6) including Dismantling of old tiles complete all as specified & directed.

Material & labour for Non skid coloured tile tiles for skirting of size 600x600x8-10mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 including dismantling of old tiles complete all as specified & directed.

Material & labour non-skid coloured ceramic tiles of size 400x400x7-8mm thick, in floor set and jointed in neat cement slurry and pointed in white/coloured cement to match in floor laid over and including 15mm thick cement screed bed of CM (1:6) including dismantling of old tiles complete all as specified & directed.

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match with existing work over and including 10mm thick rendering in CM 1:4 including dismantling of old tiles complete all as specified & directed.

Material & labour in preparation of old white wash surfaces and applying one coat of white wash on ceiling using roller complete all as specified and directed.

M&L preparation of old painted surfaces and applying one coat of cement based paint on walls of any colour using Roller complete all as specified and directed.

Materials & labour for complete removal of existing treatmemt and finishing the surfaces of wall with Birla/J K wall putty wherever required and applying two coat of Oil Bound distemper , any colour, using roller complete all as specified & directed.

M&L preparation of old plastered surfaces and applying one coat of oil bound distemper on wall surfaces using roller complete all as specified and directed

M&L preparation of old wood and wood based surfaces of any description over 10 cm width or girth & applying one coat of synthetic enamel paint using spray of any tint complete all as specified and directed.

M&L for painting steel and iron surfaces over 10cms width or girth not otherwise described with one coat of synthetic enamel paint using spray incl preparation of old painted surfaces complete all as specified and directed.

Materials & labour for complete removal removal of existing treatmemt and finishing the surfaces of wall with Birla/J K wall putty wherever required and applying two coats of Appex paint of any colour, using roller complete all as specified & directed.

M&L Rendering 5 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), including taking down old plaster from walls complete all as specified and directed.

M&L rendering 10mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair including taking down of old plasterd surface from wall of bricks or stone complete all as specified & directed.

Materials & labour for prepration of newely plastered surface and finishing the surfaces of wall with 2mm thick wall putty and applying two coat of Oil Bound distemper over one Coat of Primer, complete all as specified & directed.

M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed.

Supply & fix in repair 25mm dia Vista pattern of approved colour & finish fancy type curtain rod including brackets and fancy type end knobs, rings etc including repair to the plaster and paint damaged during fixing of rod complete all as specified & directed.

S & F in repair Steel Plate Rack made out of 0.80 mm thick stainless steel of size size 90cmx75cmx25cm with all internal fittings complete all as specified and directed.

Supply & fix (in repairs) sink without draining board made of stainless steel 1.00mm thick for kitchen with plug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 915mmx420mm, bowl size 410mmx330mmx160mm complete all as specified and directed.

Supply & fix (in repairs) sink with draining board made of stainless steel 1.00mm thick for kitchen with plug, washer and waste pipe including fixing cantilever brackets and connecting union to pipes overall size 915mmx420mm, bowl size 410mmx330mmx160mm complete all as specified and directed.

M&L repair to kitchen cabinet for hinges, hindles, pinoes hinges, stainless steel hinges or panel and as re-fixing as same as condition as useable as directed.

S&F in repairs 20"/18''long Telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed complete all as specified and directed.

S&F in repairs 150 mm size stainless steel bright finish handle for cabinet shutter complete all as specified and directed.

S&F in repair Insulated PVC Wall Lining consisting of PVC Insulated Panels having expanded polystyrene (EPS) stuck to 2mm thick plain colour PVC sheet duly fitted into the wall as per specifications and drawing and Thickness of insulated PVC wall lining 12 mm Insulated Panel with Single Side Prelam PVC sheet used instead of plain colour sheet complete all as specified and directed.

S&F in repairs 12"/10'' long Telescopic slider to facilitate drawer slide on steel ball bearing fixed with steel screws complete all as specified and directed complete all as specified and directed.

Taking down only Chowkatts or frames(without taking off shutter from frames) n exc 1.5 sq. m complete all as specified and directed.

Taking down Shutters of size exceeding 1.0 sqm but not exceeding 2.0 sqm complete all as specified and directed.

S&F in repair toilet paper holder of brass chromium plated conforming to the samples kept in the office of Engineer-in-Charge.

Supply and fix in repair cast copper alloy spindle brass disc 3/4" for CP wall mixer, WHB mixer and sink mixer pillar tap/bib taps/bib taps /anglr cock, etc suitable for MAP Accn or other accn complete all as specified and directed.

Supply and fix in repair CP Brass leg of suitable size and shape of wall mixer, WHB mixer and sink mixer of existing make as per site of MAP Qtrs complete all as specified and directed.

Supply and fix in repair brass choromium plated extension nipple of size 25 to 50 mm for CP Bib taps/angle cock etc complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators etc removing material from site complete all as specified and directed.

All as per item No 70.00 here -in- before but except conduit.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size/dia complete with all accessories / fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / Bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

All as per item No 72.00 here -in- before but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

All as per item No 72.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 72.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 72.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board complete all as specified and directed.

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / bell point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

All as per item No 77.00 here -in- before but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps complete all as specified and directed.

All as per item No 77.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 77.00 here -in- before but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch complete all as specified and directed.

All as per item No 77.00 here -in- before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board complete all as specified and directed.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fixing bell push flush type , 5 amps , 240 volts complete all as specified and directed.

Supply and fixing door bell ding dong type , 240 volts AC complete all as specified and directed.

Supply and fixing steped type electronic fan regulator flush type AC, 230 volts, complete all as specified & directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed.

Supply and fix decorative LED Tube light fitting 1x20 Watt , environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No, complete with all accessories and fixing material complete all as specified and directed.

Supply and fixing decorative LED tube light fitting 1x10 watt surface mounting , intigrated with opal diffuser complete with all acessories complete all as specified and directed.

Supply & fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed.

Taking down carefully unserviceable Sub main wiring of any size and type, removing material from site for taking credit and making good the disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed. Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length).

All as per item No 94.00 here -in- before but by using two single core cable of 4 Sqmm for Phase and neutral + 1 single core cable of 4 Sqmm for earth wire complete all as directed.Make- Plaza/Grandlay/HPL

All as per item No 94.00 here -in- before but by using two single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire complete all as directed.

All as per item No 94.00 here -in- before but by using four single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire complete all as directed.

Taking down carefully unserviceable distribution board of any capacity including wooden board and making good the disturbed surfaces of walls, etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 4 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, SPN ( Single Pole and Neutral), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/mcb as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as directed.

Supply MCB 4 pole 'B' series 32 to 40 Amp AMP amps capacity AC 415 V,10kA complete all as specified and directed.

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as directed.

S & F in repair, security light brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete, including distempering to match with existing surface all as specified and directed .

Supply and fixing in repair LED security light fitting 1x45 Watt luminaries with die cast aluminium housing IP-66 comprising epoxy powder coated enclosed with glass coverembedded lens in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed Make:- Crompton/Bajaj/Surya

All as per item No 108.00 here -in- before but capacity 25/30 watt. : Make:- Crompton/ Bajaj/Surya

Supply and fixing in repair LED light 12 watt square/Round type of size 150x 150mm surface/ ceiling mounted with aluminium hausing and frosted cover complete all as specified and direcred . Make- Crompton / Bajaj /Surya

Supply and fix in replacement of decorative wall light fixture made up of polycarbonate suitable for 10 W retrofit LED lamp and including 10 W LED lamp and including all accessories for fixing of fitting on wall all as specified and directed by Engr-in-Charge. Make Bajaj/ Crompton /Surya

Supply and fix in repair LED lamp 9 watt of Make:- Crompton./Surya/Bajaj

Supplying and fixing LED bulk head light fitting wall mounted with inbuilt edge lit LED lamp 10 watt, complete with all acessories all as specified and directed by Engr-in-Charge Make- Crompton/Bajaj/Surya

Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

All as per item No 114.00 here -in- before but socket outlet 5 pin, 05 / 06 Amps flush type 240 volts .

All as per item No 114.00 here -in- before but switch piano flush type, 15 / 16 Amps single pole, one way 240 volts

All as per item No 114.00 here -in- before but socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts.

All as per item No 114.00 here -in- before but switch bell push flush type , 5 amps , 240 volts

All as per item No 114.00 here -in- before but door bell ding dong type , 240 volts AC .

All as per item No 114.00 here -in- before but steped / Switch type electronic fan regulator flush type AC, 230 volts as per site requirement

All as per item No 114.00 here -in- before but lamp holder (Angular / Straight), insulated body, with back plate for batten fitting

Supply & fixing in replacement of modular switch one way 06 Amps,1 module, 240 volts complete all as specified & directed. Make- Anchor/Indoasian/Schneider

Supply & fixing in replacement of modular socket one way 6 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed. Make- Anchor/Indoasian/Schneider

Supply & fixing in replacement of modular switch one way 16 Amps,1 module, 240 volts complete all as specified & directed. Make- Anchor/Indoasian/Schneider

Supply & fixing in replacement of modular socket one way 6/16 Amps,2/3 pin combined ,2 module, 240 volts complete all as specified & directed. Make- Anchor/Indoasian/Schneider

Supply & fixing in replacement of modular Bell Push 6A,(1 or 2 module as per site), 240 volts complete all as specified & directed. Make- Anchor/Indoasian/Schneider

Supply & fixing in replacement of modular fan step regulator 2 Module complete all as specified & directed. Make- Anchor/Indoasian/Schneider

Supply & fixing in replacement of modular switch two way 06 Amps,1 module, 240 volts complete all as specified & directed. Make- Anchor/Indoasian/Schneider

Supply & fixing in replacement of modular white cover plate with frame,3 module for 6 / 16 Amps Switches And Sockets , 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,4 module , 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,6 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,8 module, 240 volts complete all as specified & directed.

Supply & fixing in replacement of modular white cover plate with frame,12 or more Module Required at site module, 240 volts complete all as specified & directed.

jitendra AND Co

B.K.construction

AR Enterprises

AEGIS INTERNATIONAL