FY 2025-26 Daiviya Apda Work Under EDD-I Mahoba

Amount

Cartage of the following material from center Stores, Mahoba or from any other place to dump site, including the work of its loading and unloading at the respective ends and also including the work of dragging etc and also including the cost of arrangement of laborer, T&P carrier etc required for proper completion of work.

8.5/9 meter long PCC pole

11/13 meter long ST pole

10/16 KVA transformer

25 KVA transformer

63 KVA transformer

Weasal conductor, and other line material

Drilling of hole in M. S. channel and angle for Double pole, guarding, Extra “T”

Opening of HT/LT fittings from the damaged single support of 8.5/9 meter long PCC pole at various places, including the cost of arrangement of labourer, T&P etc required for proper completion of work

Making coils of spread and dismentalled conductor with utmost care for its maximum possible laying on the support or to placed in store.

Erection and grouting of double pole structure of 8.5/9 meter long PCC pole including fixing of HT fittings as per RESPO norms. The support shall be grouted in cement, sand, and brick ballast in ratio 1:2:4.

Erection of 8.5/9 meter long PCC pole including compete HT/LT fittings as per RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labourer, T&P, carrier etc required for proper completion of work.

Erection of 11/13 meter long ST pole including compete HT/LT fittings as per RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labourer, T&P, carrier etc required for proper completion of work.

Installation and grouting of following as RESPO manual in ratio 1:4:8 in cement, sand and brick ballast.

11 KV Stay set

Straightening of tilted / bended 8.5/9 meter long PCC pole / 11/13 meter long ST pole, as per RESPO norms.

Installation of Extra “T” as per RESPO manual

Re nozalling and tightening of stay, as per RESPO norms

Chopping of trees

Replacement of following damaged fittings.

11 KV pin insulator

11 KV disk insulator

Replacement matereal Contrector arrange by own his coast Installation of following line material in proper alignment and direction as per RESPO manual, including the cost fo arrangement of labourer, T&P etc. required for proper completion of work for the supervising engineer.

11 KV cross arm holding clamp with nut & bolt

11 KV U clamp with nut & bolt

11 KV F clamp with nut & bolt

Installation of following capacity transformer in proper alignment and direction as per RESPO manual including the cost of arrangement of labourer, T&P etc required for proper completion of work.

10/16 KVA transformer

25 KVA transformer

63 KVA transformer

Laying, sagging and stringing and jumpering/ binding etc of the following conductor on the aforesaid newly erected Poles as pre RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labour, T&P carrier etc required for proper completion of work.

ACSR weasel conductor

Dog Conductor

AB Cable

Re-sagging, binding and jumpering of loose following conductor as per RESPO manual and as per direction of supervising engineer, including the cost of arrangement of labourer, T&P carrier etc required for proper completion of work.

ACSR weasel conductor

Dog Conductor

AB Cable

Tightening of loose guarding

MS SONAM ENTERPRISES (BID ID -5188680)