Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.5 LAdmitted-Finance | ₹2.5 L | L1 | Admitted-Finance |
| 2 | L2₹2.5 L+₹800 (0.32%)Admitted-Finance CW 545 SANJAY GANDHI TRANSPORT NAGAR NEW DELHI 110042 | NORTH | DELHI | 110042 | ₹2.5 L+₹800 (0.32%) | L2 | Admitted-Finance |
| 3 | L3₹2.8 L+₹33,600 (13.4%)Admitted-Finance | ₹2.8 L+₹33,600 (13.4%) | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Devraj Enterprises L2 | Super Power Controller L1 | SUSHMA ENTERPRISES L3 |
|---|---|---|---|---|---|---|
| 1.01 | Supply of submersible pump set fitted with dynamical balanced E P impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM, suitable for operation on 3 Ph., 415 ±5% Volts, 50 Hz, AC power supply having, Motor Power :7.5 HP, Stage: , Pump head range: 73-90-95Mtr, Discharge range: 300-200-125LPM,. Make: BS/SU/ DJB Approved Make | 2 | Nos. | 91,000 ₹91,000 | 91,000 ₹91,000 | 80,000 ₹80,000 Lowest |
| 1.02 | Hut type electrical feeder pillar/metal board Floor/Wall Mounted of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet withhorizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items.
1. MCCB 63 Amp, 4 Pole-1No. 2. RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No
3. DOL starter of 5HP, 3Phase oil immersed type 1No 4. Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No 5. Digital Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1No 6. LED Indicating lamps with fitting (a set of 3 lamps) 1Set 7. Shunt capacitor of 5 KVAR with three phase
isolator 1No 8. Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No 9. Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire &thimblingetc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. Make:-All the insert used in Panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved. | 1 | Nos. | 52,500 ₹52,500 | 52,500 ₹52,500 | 50,000 ₹50,000 Lowest |
| 1.03 | S/o PVC insulated flat submersible cable with copper conductor having three core Size 4 sq mm 1100 volts (100mtr per roll) Make- Gloster/Universal/Havells/DJB Approved | 2 | Roll | 45,000 ₹45,000 Lowest | 45,000 ₹45,000 Lowest | 54,000 ₹54,000 |
| 1.04 | S/o G.I Pipe 50mm dia medium with GI flange welded in both side 03 mtr long with ms strip complete with threading work on each side of pipe each flange should be 4 holes and cut for cable.make- ISI Mark | 25 | Nos. | 21,250 ₹21,250 Lowest | 21,250 ₹21,250 Lowest | 52,500 ₹52,500 |
| 1.05 | S/o G.I Tail piece 50mm dia medium class 1.5 mtr long complete with one end threaded and one end welded with flange Make- ISI Mark | 2 | Nos. | 2,500 ₹2,500 Lowest | 2,500 ₹2,500 Lowest | 3,000 ₹3,000 |
| 1.06 | S/o MS clamp for holding 50 mm dia pipe 600mm long and 12 mm thick holding the pipe the complete with nut bolt and washer. | 2 | Nos. | 2,100 ₹2,100 | 1,900 ₹1,900 Lowest | 3,000 ₹3,000 |
| 1.07 | S/o rubber indertion jointing sheet conforming IS 638/79 with ISI mark 1.5 mm thick make- Jyoti or any other make approved by DJB | 10 | Kg. | 1,450 ₹1,450 Lowest | 1,450 ₹1,450 Lowest | 4,000 ₹4,000 |
| 1.08 | S/o required off size threaded nut bolts of good quality. | 50 | Kg. | 6,250 ₹6,250 | 6,250 ₹6,250 | 5,250 ₹5,250 Lowest |
| 1.09 | S/o MS bore cover 8 mm thick suitable for 200 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 50 mm dia hole in the centre. | 2 | Nos. | 2,500 ₹2,500 Lowest | 2,500 ₹2,500 Lowest | 5,000 ₹5,000 |
| 1.10 | S/o GI bend with both ends having welding flanges of size 50 mm dia. Make of flange- ISI, Make of pipe Jindal /tata /DJB approved. | 2 | Nos. | 1,900 ₹1,900 | 1,700 ₹1,700 Lowest | 3,000 ₹3,000 |
Tender Value
Refer Docs
EMD Value
₹6,700
Closing Date
7 Aug 2026, 3:00 pmClosed
EE(EnM)M-5
EE(EnM)M-5
SITC of Submersible pumpset with all allied work at Rajpura tubewell in AC-18.
2026_DJB_296200_1
NIT No. 10 item No. 3 (2026-27) EE (T)/EE(EnM)M-5
Open Tender
Miscellaneous Works
Works
15 days
EE(EnM)M-5
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
online
₹6,700
19 Aug 2026
31 Jul 2026
7 Aug 2026
31 Jul 2026
7 Aug 2026
31 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | GST % |
|---|---|---|---|---|---|---|
| 1.01 | Supply of submersible pump set fitted with dynamical balanced E P impeller mounted on stainless steel shaft protection sleeve EP stage bowl of closed grained shorted type impeller. The pump will be directly coupled to required wet type induction motor of speed 2900 RPM, suitable for operation on 3 Ph., 415 ±5% Volts, 50 Hz, AC power supply having, Motor Power :7.5 HP, Stage: , Pump head range: 73-90-95Mtr, Discharge range: 300-200-125LPM,. Make: BS/SU/ DJB Approved Make | 2 | Nos. | - | - | 18% |
| 1.02 | Hut type electrical feeder pillar/metal board Floor/Wall Mounted of welded construction of size 1370mm x 760mm x 460mm fabricated with 16 SWG M.S. sheet withhorizontal and vertical intermediate chamber of suitable size on suitable size insulating board to make the Panel Robust, having double door with 14 SWG S.S hinges along with double locking arrangement with arrangement for mounting of switch gear and electrical energy meter i/c powder coating, Vermin proof having following items.
1. MCCB 63 Amp, 4 Pole-1No. 2. RCCB/ELCB 63 Amp, 4 Pole with earth fault indicator and positive contact indication protecting a circuit automatically 1No
3. DOL starter of 5HP, 3Phase oil immersed type 1No 4. Digital Ampere meter 96mmx96mm square shape of 0-30 Amp range 1No 5. Digital Voltmeter of 96mm x 96 mm square shape of 0-500 volt range with selector switch 1No 6. LED Indicating lamps with fitting (a set of 3 lamps) 1Set 7. Shunt capacitor of 5 KVAR with three phase
isolator 1No 8. Motor Protection Assembly having Earth Leakage protection, Phase sequence corrector, Single phasing protection, Over load protection, High voltage-low voltage protection. 1No 9. Programmable time switch (i.e. RYB Phase & facility to change over from automatic to manual & vice versa) up to 10 H.P.1No Complete wiring of panel board & installation of electrical accessories in the panel with required copper conductor wire &thimblingetc as required. The panel board shall be mounted on the base frame of 600mm height made of 50x50x6mm angle iron frame. Make:-All the insert used in Panel must be of DJB approved makes and should be ISI marked where make of that equipment is not approved. | 1 | Nos. | - | - | 18% |
| 1.03 | S/o PVC insulated flat submersible cable with copper conductor having three core Size 4 sq mm 1100 volts (100mtr per roll) Make- Gloster/Universal/Havells/DJB Approved | 2 | Roll | - | - | 18% |
| 1.04 | S/o G.I Pipe 50mm dia medium with GI flange welded in both side 03 mtr long with ms strip complete with threading work on each side of pipe each flange should be 4 holes and cut for cable.make- ISI Mark | 25 | Nos. | - | - | 18% |
| 1.05 | S/o G.I Tail piece 50mm dia medium class 1.5 mtr long complete with one end threaded and one end welded with flange Make- ISI Mark | 2 | Nos. | - | - | 18% |
| 1.06 | S/o MS clamp for holding 50 mm dia pipe 600mm long and 12 mm thick holding the pipe the complete with nut bolt and washer. | 2 | Nos. | - | - | 18% |
| 1.07 | S/o rubber indertion jointing sheet conforming IS 638/79 with ISI mark 1.5 mm thick make- Jyoti or any other make approved by DJB | 10 | Kg. | - | - | 18% |
| 1.08 | S/o required off size threaded nut bolts of good quality. | 50 | Kg. | - | - | 18% |
| 1.09 | S/o MS bore cover 8 mm thick suitable for 200 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 50 mm dia hole in the centre. | 2 | Nos. | - | - | 18% |
| 1.1 | S/o GI bend with both ends having welding flanges of size 50 mm dia. Make of flange- ISI, Make of pipe Jindal /tata /DJB approved. | 2 | Nos. | - | - | 18% |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.03 MB
BOQ_394261.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .