Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.8 LAccepted-AOC H NO 111 553 64 CATTLE POUND TOWARDS AVA HILL CAMP ROAD ARUVANKADU NILGIRIS DIST TAMIL NADU 643 202 | THE NILGIRIS | TAMIL NADU | 643202 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹38.7 L+₹2.9 L (8.05%)Rejected-Finance C 234 ADG P CHENNAI | L2 | Rejected-Finance BEING NOT L1 BIDDER | |
| 3 | L3₹40.8 L+₹5.0 L (14.0%)Rejected-Finance ASHOKA PARK PALLAVA PARK BVT INS VISHWAKARMA INDIAN NAVY OF GE ND VISAKHAPATNAM | L3 | Rejected-Finance BEING NOT L1 BIDDER | |
| 4 | L4₹41.4 L+₹5.6 L (15.6%)Rejected-Finance CHENNAI | CHENNAI | TAMIL NADU | 600001 | L4 | Rejected-Finance BEING NOT L1 BIDDER | |
| 5 | L5₹43.3 L+₹7.4 L (20.8%)Rejected-Finance IV 54 DIVYA COMPLEX RAJEEV NAGAR BOY S COMPANY ARUVANKADU THE NILGIRIS 643202 | ARUVANKADU | THE NILGIRIS | TAMIL NADU | 643202 | L5 | Rejected-Finance BEING NOT L1 BIDDER |
Tender Value
₹43.6 L
EMD Value
₹87,300
Closing Date
22 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DSSC
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
PROVN OF DRAIN FROM WH 15,14,13 AND 7 AND WH 18,19 AND 20 AT DSSC WELLINGTON
2022_MES_525073_1
8244/E8
Open Tender
Civil Works
Item Rate
120 days
WELLINGTON
PLEASE REFER TENDER DOCUMENTS AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹87,300
Yes
4 Jul 2022
19 May 2022
24 Jun 2022
19 May 2022
22 Jun 2022
2 Jun 2022
Amount
Excavation over areas, not exc.1.5 mtr deep and getting out in hard /dense soil all as specified and as directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.
Excavation in trenches, n exc 1.50m wide and n exc 1.50m in depth, for foundation etc., and getting out in hard/dense soil all as specified and as directed.
Removing surplus excavated soil to a distance n.exc 50mtr depositing where directed at a level not exceeding 1.5m from the starting point all as specified and as directed. .
Returning filling in any type of soil including spreading, leveling watering & well ramming in layer not exc 25cm thick all as specified.
M & L for plain cement concrete type-C2 1:3:6 (using 40mm graded agg.) in surface channel and drains all as specified and as directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitered / stopped ends etc, complete all as specified and directed.
M&L for precast cement concrete block masonry with solid blocks type C-1 (using 20mm graded aggregate) 1 : 3 : 6, exc 10cm in width and setting in CM 1:6. complete all as specified and directed.
M&L for providing PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in plinth band, string course or coping etc. including necessary form work complete all as specified and directed.
M&L for rendering 15mm thick in cement mortar 1:4 on fair face of brick work or concrete surfaces finished even and smooth without to using extra cement all as specified and as directed.
S&F reinforced concrete pipes 300mm bore of pipe, class NP2, laid and jointed complete with collars all as specified and directed.
M&L for plain cement concrete, type D-2 1:4:8 (using 40 mm graded crushed stone aggregates) as in foundation, filling and mass concrete etc, complete all as specified and as directed by Engr-in-Charge.
M&L for RCC Type B1 (1:2:4), 20 mm graded stone aggregate (Nominal mix) as in slabs supported on walls ballast walls and the like; any thickness; above top of footing; including attached pilasters and buttresses complete all as specified and directed.
M&L for RCC Type B1 (1:2:4), 20 mm graded stone aggregate (Nominal mix) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses complete all as specified and directed.
M&L for RCC Type B1 (1:2:4), 20 mm graded stone aggregate (Nominal mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and directed.
M&L use and waste of timber as in Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pilasters, buttresses, etc.; vertical or to batter rough finished surfaces of concrete complete all as specified and directed.
M&L for use and waste of timber as in Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces of concrete complete all as specified and directed.
M&L for use and waste of timber as in Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) rough finished surfaces of concrete complete all as specified and directed.
M&L for use and waste of timber as in Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide rough finished surfaces of concrete complete all as specified and directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint white or tinted complete all as specified and directed
Material and labour for TMT bars 10 mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia all as specified and as directed
Material and labour for TMT bars 6 to 8 dia cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9 mm dia all as specified and as directed
Material and labour for Precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slabs with plain fair faces including setting in CM 1:4 all as specified and as directed. Note : Reinforcement shall be measured and paid separately.
Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in any type of soil complete all as specified.
M&L for hard core of broken stone or boulders gauge n exc 63mm, deposited, spread and leveled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified.
M&L for 100 mm thick PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in sub base for floors/pavings etc all as specified and as directed.
M&L for 75 mm thick cement concrete type C-2, 1:3:6 (using 40mm graded aggregate) as in plinth protection/floor finished fair & even without using extra cement, complete all as specified.
M&L Chequerd cement concrete coloured tiles 300 x 300x 25 mm thick set jointed in neat cement slurry in floors with grey cement & pigment including 15 mm thick screed bed in cm 1:6 all as specified and directed
GMS Builders
Sree Constructions
JK BUILDERS
m/s prabakaran
ACE PROMOTERS
C A RAJENDRAN CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .