PROCUREMENT OF SLIT LAMP WITH ALL ACCESSORIES

ESSENTIAL SPECIFICATION

CLINICAL PURPOSE Ophthalmic diagnostic instruments designed for examining the eye (mostly the anterior part of the eye) using an illumination system combined with a binocular microscope. The instruments usually consist of illumination sources with a mechanism that provides a slit beam of light into the eye with different types of illumination (e.g., direct or indirect, focal or diffuse, background illumination) a binocular microscope for viewing the magnified slit image, and a control component for adjusting the focus of the microscope and the slit (e.g., slit rotation, slit width); some also have refraction mirrors to direct light to a camera mounted above the microscope. Slit lamps provide a magnified view of eye structures (e.g., eyelid, sclera, iris, crystalline lens and cornea). We can also examine the retina using specific lenses.

TECHNICAL CHARACTERISTICS • Light Source – LED Illumination/ Halogen bulb • Condensing lens • Adjustable slit lamp aperture Slit width (0-14 mm) Slit length (0-14mm) Slit aperture (0.2mm-14mm) Slit angle 0-180 degree • Slit inclination – 5,10,15,20 degrees • Filter – grey, red free, blue, UV & Heat Absorption • Intensity control

BASE • Height adjustable centre • Movement control panel o Updown 30mm o Right left -100mm o Forward backward 100mm o Fine Movement -15 mm joystick o Chin rest up down 80 mm • Patient support frame

SLIT LAMP IMAGING SYSTEM • Imaging module with built in camera from original Slit Lamp manufacturer, camera should have 1200x1900 pixel resolution. • Unit should be supplied with camera release module on capture. • Table top for easy acquisition of images during examinations. • Image management software with storage facility of still images & movie recordings. • Suitable PC to be provided to install the software. • Power requirements – should operate from 200 to 240 Vac, 50 Hz input supply.

REPORTS • Patient report • Measurement overview • Hospital name

INTERFACES AND ACCESSORIES • Latest Digital color printer and Ethernet port for network connection and network printer. • Ultrasound Data Link. Data interface for electronic medical record (EMR) / patient management systems (PMS). • Data export to USB storage media. Latest operating system with latest software in Desktop computer. • PC Monitor 32 inches. UPS with Voltage controller stabilizer for about 30 minutes back up. • Data recording 5TB hard disk for recording data. • Goldmann Applanation Tonometer (1 no.) • Volk digital wide field magnification lens with clearpod (2 nos) • Suitable Motorized Table to be supplied. • Bulb – 6 nos • Fuses – 4 nos • Four mirror Volk Gonioscope • Adjustable chairs for doctor and patient (2 nos)

Certification should be US FDA/CE approved.

Warranty and maintenance should be one year including for all spares and calibration work.

Service center should be in Bengaluru.

Service support contact details (Hierarchy wise: including a toll free / land line number) of manufacturer, supplier and local service agent to be provided.

Vendors to quote CAMC lasting for 5 years period after expiry of warranty for indication purpose only.

ADDITIONAL TERMS AND CONDITION:-

NOTE: APPENDIX 3 (SELF CERTIFICATION FOR MINIMUM LOCAL CONTENT AND ANNEXURE II (DECLARATION CERTIFICATE FOR PROCUREMENT OF GOODS AND SERVICES) SHOULD BE MANDATORILY SUBMITTED ALONG WITH TECHNICAL BID (THE DOCUMENTS SHOULD BE SIGNED AND SEALED) OTHERWISE THE QUOTE WILL NOT BE CONSIDERED FOR TECHNICAL EVALUATION.

THE PARTIES SHOULD SUPPLY, INSTALL AND COMMISSION THE EQUIPMENT AT INDUSTRIAL HEALTH CENTER, HAL.

THE PARTY TO PROVIDE TRAINING ON OPERATION AND MAINTENANCE OF THE a. EQUIPMENT DURING INSTALLATION & COMMISSIONING OF THE EQUIPMENT TO HAL TECHNICIANS/ DOCTORS AT FREE OF COST.

THE PARTY HAS TO SUPPLY ONE SET OF TECHNICAL DOCUMENTATION IN ENGLISH FOR OPERATION & MAINTENANCE (MANUALS) ALONG WITH THE SUPPLY, IF AVAILABLE.

PRODUCT CATALOGUE TO BE PROVIDED ALONG WITH TECHNICAL BID

WARRANTY OF THE ITEM TO BE MENTIONED IN THE QUOTATION.

SERVICE CENTER IN BANGALORE

SPECIAL INSTRUCTIONS

Comments like "YES, AGREED, WILL BE GIVEN AT THE TIME OF SUPPLY, CONFIRMED, WILL BE COMPLIED……… etc" are not acceptable where numerical values are to quoted

The quotation should be furnished strictly in comparison form w.r.t to HAL specification. Deviations if any, should be clearly highlighted with necessary clarification.

Please confirm in your quotation whether this product is your manufactured or marketed product. Dealers / Stockiest should submit/upload the quote along with the authorization letter from the OEM / Manufacturer . Dealers / Stockiest quote without authorization letter from OEM / Manufacturer will be summarily rejected.

Confirmation that we have read and understood all the terms an conditions of RFQ.

HINDUSTAN AERONAUTICS LIMITED INDUSTRIAL HEALTH CENTRE, BANGALORE COMPLEX SURANJANDAS ROAD VIMANAPURA POST, BANGALORE-560017. INDIA

(PRICE SCHEDULE) - Annexure-A (PRICE SCHEDULE / SCHEDULE OF RATES SHOULD BE QUOTED BY THE TENDERER AS PER THE FORMAT GIVEN BELOW)

Tender Ref .No: EPROC/CPR/2025/28/1

Name of Item / Work: Procurement of SLIT LAMP (WITH ALL ACCESSORIES)

Name of the Vendor and Address

Delivery should be FOR Industrial Health Centre, HAL

Payment Term/HAL term: 30 days after installation and commissioning of items through RTGS/NEFT

Delivery: Full quantity within 2-4 weeks from the date of receipt of Purchase Order

Validity of the quotation should be for 120 days

Warranty should be provided for minimum 1 year

NOTE: CAMC Charges for 5 years after expiry of warranty to be submitted along with quotation which is for indicative purpose only, for future use by HAL. Manufacturer recommended price list of Spares also to be submitted for future reference.

Designation

Company's full address

Email ID

Mobile

Bank Details Bank Account Number

IFSC Code