PROVISION OF CERTAIN FLOORING WORKS SERVICES AT LOGISTIC SECTION (P-16) , WEATHER SHELTER NEAR SURVIVAL POOL, RAIN WATER DRAIN AT OFFICERS MESS AND STAGE WITH COVER SHED AT VAYU VIHAR OF IAM (AF) BANGALORE

Amount

Demolition cement concrete (unreinforcement) in ground floors and paving n. exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 (20mm grade aggregate) as in levelling coarse in flooring finished even and fair under floor finishes complete all as specified and as directed.

M&L for Non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

All as per item No.03 above, but , on vertical surfaces such as skirtings, dados etc. over 10 mm thick backing coat in cement plaster in CM 1:3 complete all as specified and as directed.

Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface as in hard / dense soil complete all as specified and as directed.

M & L for PCC 1:3:6, type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and as directed.

M & L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F fibre glass reinforced translucent corrugated sheeting (2mm thickness) with two corrugation side lap fixe with coach screw and washer in roof, wall etc. fixed with self tapping screws complete all as specified and as directed.

S & F for prelaminated galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, any curvature fixed with self tapping screws complete all as specified and as directed.

Material and labour painting to new steel surfaces two coats of synthetic enamel paint over a coat of red oxide primer over 10 cm width by or girth not otherwise described complete all as specified and as directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/dense soil for foundation complete all as specified and as directed.

M&L for concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and as directed.

Material and labour for precast cement concrete block masonry with solid blocks in PCC 1:3:6, type C1 using 20mm graded aggregate exceeding 10cm width and setting in CM 1:4 complete all as specified and as directed.

M & L for forming fair finished drain or channel 50 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc complete all as specified and as directed.

M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for precast cement concrete 1:2:4 type B1 (20 mm graded stone aggregate) as in coping, plinth courses, kerbs bed blocks in cement mortar 1:4 including weatherings slighty rounded of chamfered angles and throating complete all as specified and as directed.

M&L for Returning , filling soft/loose soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

M&L for Pre-cast cement concrete block masonry built in pre-cast cement concrete (1:3:6) type C-1 (using 20 mm graded stone agg) and set in CM 1:6 exc. 10 cm in width complete all as specified and as directed.

M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces in CM 1:4 finished even and fair without using extra cement complete all as specified and as directed.

M & L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a priming plaster with alkali resistant priming paint complete all as specified and as directed.

M&L for M S works as in posts including cutting tops to shape as directed, drilling holes, including all necessary drilling, bolting or reveting, etc., and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F compound girders and stanchions, lattice girders, aerial masts and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. Fe 410-W (Gde E-250) quality 'A' complete all as specified and as directed.

S&F Plain, galvanised, mild steel sheeting (0.8mm thick), in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 as in roof covering in any curvature complete all as specified and as directed.

M&L Providing precast cement concrete louvers and jallies, 50mm thick (measured solid), type B1 1:2:4 (12.5 mm graded aggregate) including all mouldings and settings in Cement Mortar 1:4 complete all as specified and as directed.

Material and Labour for point wiring complete with 1.5 sqmm FRLS grade single core PVC insulated, unsheathed, 1100V grade copper multistranded conductor drawn through PVC rigid non metallic conduit 20 mm dia on walls, roofs floors etc including PVC insulated copper earth continuity conductor 1.5 Sqmm cable connected to common earth dolly including steel modular flush boxes made out of 1.2mm thick MS sheet concealed in walls with suitable modular white cover plate with frame for housing the switches, sockets, regulators etc all as specified and directed for :- (a) One light point controlled by one switch.

(b) One 5A 2pin/3pin switch socket out let multipurpose on independent Board complete all as specified and as directed.

(c) One call bell point controlled by one bell push complete all as specified and as directed.

All as per item No -26 above, but, wiring complete with 2.5 Sqmm for 5 pin 5/15A socket multipurpose on independent board complete all as specified and as directed.

M&L Modular Switch 1 way 6 Amps 1 Module complete all as specified and as directed.

M&L Modular Socket,6 Amps- 2/3 pin combined 2 Module complete all as specified and as directed.

M&L Modular Switch 1 way 16 Amps 1 Module complete all as specified and as directed.

M&L Modular Socket,6 A/16A,2 Module complete all as specified and as directed.

M&L Modular bell push 6A,1 Module complete all as specified and as directed.

Material and labour for PVC ceiling rose two to three plate surface complete all as specified and as directed.

S & F Door bell ding dong AC, 230 volts, single pole complete all as specified and as directed.

Supply and fixing 2' x2' Square surface mounted LED slim down Light fitting 36 W with drop down acrylic diffuser,connector block etc., complete with all accessories and including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete all as specified and as directed.

Supply and fixing in repairs LED Tube light fitting 1 x 20 W , Surface mounted , box type luminaire with aluminium Housing ,high quality PC diffuser complete with all accessories and including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal complete all as specified and as directed.

S & F aesthetically designed linear mirror 7W LED light fitting with out shadow and making all connections complete all as specified and as directed.

Supply and fixing in repair 1' x1' LED recessed / surface light fitting 18 W complete with all accessories and including connecting up with 3 core 0.5sqmm copper wire between ceiling rose and fitting terminal Complete all as specified and as directed.

Shanthi Construction

docileworx

PRANAVI CONSTRUCTION

M/s STAR ELECTRICALS

ADWITHI