REPAIR MAINT OF SEWAGE LINE AND CLEANING OF MAN HOLES AND SEPTIC TANK AT BRAR SQUARE, 1 WEC, 61 CAV AND KARAN VIHAR IN THE AREA OF AGE B/R-I UNDER GE (CENTRAL) DELHI CANTT-10

Amount

Cleaning of EWCs, IWCs, bottle traps, Nahani Traps, Gully traps and Floor traps etc and CI/PVC Pipes all types top to bottom including junctions etc, Cleaning of sewage line upto GT. complete all as specified and as directed.

Cleaning of Manhole depth of 0.9 mtr and any size of MH in the area and taking out sludge and depositing complete all as specified and as directed.

Cleaning of Manhole depth exc 1.2 mtr and above of any size of MH in the area complete all as specified and as directed.

Cleaning of Sewage line diameter 100mm bore complete all as specified and as directed.

Cleaning of Sewage line diameter 150mm bore complete all as specified and as directed.

Cleaning of Sewage line diameter 200mm bore complete all as specified and as directed.

Cleaning of Sewage line diameter 300mm bore complete all as specified and as directed.

Cleaning of Sewage line diameter exc 300mm bore complete all as specified and as directed. Note :- For execution of item from Srl No. 1 to 7 above Agency should deploy minimum of 04 Nos Safaiwala and 01 Nos Supervisors on all days of the month/year during the contract period including Sunday and Holidays so as to complaints are attended promptly within 02 hours so that health and life of troops and their families is not adversly affected. The contractor shall take immediate action to attend any complaint assigned to him through site order book/verbal instructions from Engineer-in-charge or on telephones, MES call centres/IVRS from occupants. In all cases he shall attend the complaints in the specified duration. Note : Record of persons deployed by contractor shall be mainteined in sub division duly signed by Eng-in-charge & contractor. Penalty for non attending Complaints:- (a) Complaint pending 3-24 hours - 500 Rupees per complaint.

Taking down Cement plaster on brick walls built in cement mortar including raking out joints, hacking for key, scrubbing down with water etc omplete all as specified and as directed. Engr-in-Charge .

M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even complete.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specifed as direted by Engr-in-charge.

M&L for complete removal exising teratment from old surface of wall by scrubbing with hard brushing, brooming down or steel wire brushing scraping down smook soot mould moss and efforescent salts and treating oil and greasy spots as applicable and washing with water & applying two coat of cement based paint complete all as specified and directed.

Demolition and breaking up drain pipes (salt, glazed ware, AC or reinforced concrete) (100-200mm internal dia) of any description set in cement mortar.

Supply and laying, DWCPE(SN8) 150 mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in teenches to a level on concrete bed complete all as specified. .

Supply and laying, DWCPE(SN8) 200 mm dia pipes and snap fit coupler incl testing and laid properly, jointed laid in teenches to a level on concrete bed complete all as specified. .

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in foundations, filling and mass concrete complete all as specified and directed.

Demolation Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as specified.

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in Cm 1:6 all as specified and directed.

Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 incl demolition of brick work built in cement mortar compolete all as specified and directed.

M&L for cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 or 3/4 section) in cement concrete 1 : 2 : 4 type B1 using 20mm graded stone aggregate finished smooth and reforming benching as required for 150mm dia pipes complete all as specified.

M&L for Dewatering and desludging of septic tanks of 100 to 200 users capacity using( mechanical device system) by dewatering sludge water and removing sludge/waste material etc. through container/tanker to a distance exc 5KM and complete all as specified and directed by the Engr-in-Charge.

M&L for Dewatering and desludging of septic tanks of upto 100 users capacity using( mechanical device system) by dewatering sludge water and removing sludge/waste material etc. through container/tanker to a distance exc 5KM and complete all as specified and directed by the Engr-in-Charge.

Mechanically used water fitting Hydraulic pressure machine and water sucking hydraulic pressure machine jet press for cleaning of sewage line shall be used by the contractor as per direction of Engineer-in-Charge as on required basis. Job shall be completed to the entire satisfaction of GE. (Zone - B.)

Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortor of any diameter incl bends.

S&F in repair 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc including taking out/dismentling of old pipe complete all as specified.

S&F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls etc including taking out/dismentling of old pipe complete all as specified.

S&F in repair PVC (SWR) bends any radius, 110 mm bore complete.

S&F in repair PVC (SWR) bends any radius, 75 mm bore complete.

Demolition of Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

M&L Machine pressed precast concrete PU coated colour interlocking paver block any shape and size, with grey cement and pigment confirming to IS 5658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed.

M&L for sand filling under floor or in foundations including watering and consolidation

S&F Cequered cement concrete tiles with grey cement and pigment 300cm X 300cm x 25mm thick set jointed and pointed in neat cement slurry in floors and incl 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for cement concrete 1:2:4 type B-I, using 20 mm graded stone aggregate as in coping and similar work incl necessary form work to obtain a smooth finishes complete all as specified and as directed.

Dismantling floor, hearth or wall tiles including cement mortar concrete bedding amd removing rubbish off the premises complete all as specified and directed.

M&L for glazed ceremic colour tiles (600x300x7mm) thick, in vertical surface etc set and jointed in neat slurry and pointed in white or coloured cement to match with tiles including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

M & L for Non skid 300x300x6-7mm thick coloured ceramic tiles(joint less) as in floor over hacking surface of existing floor on 15mm thick screed bed in CM 1:6 including pointing in coloured cement to match the shade of tiles including cutting of existing door shutter at required height. complete all as specified directed by Engr-in-Charge.

Demolition of RCC work of any description and any position.

M&L in repair for precast cement concrete 1:2:4 type B-0 (using 12.5mm stone graded agg) as in louversand jallies 40mm thick designed as fort pattern (measured solid) including all moulding but exceeding frame and set in CM1:4 all as per sample shown and directed by engineer-in -charge.

S&F precast RCC coping/post of size 600x100x50 mm suitable for fixing of RCC Jallies in vertically & horizontally including necessary moulds and grooves as required in shape and size complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (padestal pattern) white incl 'P' or 'S' 100 mm trap and making good the disturbed surface to match with the existing complete all as specified and all as directed.

Dismantling RCC posts or struts (wood steel or RCC) any section embedded in natural ground including taking out embedded portion and making good disturbed ground complete all as specified and directed. Note : Dismantling of existing galvanized iron steel barbed wire / Chain link fencing shall be measured & paid for separately.

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil.

M&L for Cement concrete 1:4:8 type D-2 using 40mm graded stone agg as in foundations, filling and mass concrete complete all as specified and directed.

Dismantling old Chain link fencing of any description fixed to any type of fencing posts complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel galvanized chain link fencing 3.15mm dia of mesh wire, mesh size 75x75mm with straining bolts, with 0.9mm dia MS binding wire, flat iron fillets (for securing wire mesh etc), binding and jointing complete, including necessary drilling, bolting or revetting etc, complete all as specified and as directed. Note:- Flat iron, round bars, nut bolts and washer shall be measured and paid for sepaRately as supply only.

S&F mild steel work as in angle iron in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc, and similar works conforming to Grade E-165 (Fe 290), complete, all as specified & directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

Supply & fix mild steel round bars of 10 mm dia and over conforming to Grade E-165 (Fe 290) for fixing in chain link wire fencing, complete all as specified & directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5 cm but not exc 10 cm long and dia of neck 5 to 10 mm, complete all as specified & directed.

Dismantling steel barbed wire of any description fixed to any type of fencing posts complete all as specified and as directed by Engineer-in-Charge.

S&F galvanised 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed. Note :- Each line of horizontal / vertical / diagonal wire to be measured for the purpose of payment.

Excavation in trenches n.exc 1.5 M wide & n.exc 1.5 M in depth and getting out in soft/loose soil complete all as specified and directed

Excavation in trenches n exc 1.5m wide and exc 1.5 m but n.exc 3.0m in depth for foundation etc and getting out in soft/loose soil complete all as specified.

Returning, filling in including spreading, leveling, watering and well ramming in layers n.exc 25 cm thick in soil complete all as specified and directed.

Removing excavated material (Soil) to a distance n.exc 50 m and depositing where directed at alevel n.exc 1.5 m above the starting point complete all as specified and directed.

Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt

S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Dismantling wrought iron or mild steel work of any description such as guard bars, grills etc.

S&F tubular square pipe sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed

S & F in replacement precast fibre reinforced cement concrete Manhole cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 450mmx450mmx50mm omplete all as specified and as directed.

S & F in replacement precast fibre reinforced cement concrete Manhole/drain cover including grove and hook arrangement for lifting and placing in position and sides covered by MS sheet medium duty of overall Size 1000mmx500mm x50 mm omplete all as specified and as directed.

Schedule of Credit

a.k constructions (BID ID -3349154)

M/S ANIL KUMAR (BID ID -3356935)

M/S GR construction compony (BID ID -3363596)

V M CONSTRUCTION (BID ID -3363488)

Kunal Construction Co. (BID ID -3363223)

imran construction company (BID ID -3355699)