Construction of Protection Barrack at Kisinda of Khalasuni WL Range under Bamra WL Division.

Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge.

Supplying and filling in foundation and plinth with good quality river sand including watering, ramming with cost, conveyances, royalties of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer-in-charge

Cement concrete of proportion (1:3:6) in foundation and floors using 4cm size clean hard black crusher broken granite stone metal of approved quality and from approved quarry including hoisting, lowering and laying concrete in layers not exceeding 15 cm. (6") thick to the required level ramming, watering, curing etc. complete including cost, conveyance, royalties of all materials with all labour and T&P required for the work etc. complete in all respect and as per the direction of the Engineer-in-charge.

First class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.

Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge

(1st Floor)

(2nd Floor)

Providing, lifting, hoisting and laying Reinforced cement concrete of M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 250 Kg. / Square cm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 516 using 12 mm. to 20 mm. size black hard crushed broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned ( 20mm. size chips not to exceeds 25 % ) to be mixed in concrete mixture with Portland slag cement (PSC) including hoisting, lowering, laying and compaction concrete by using vibrators, watering and curing for 28 days, centering and shuttering then after dismantling and removing debris from the work site and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T & P required of the work etc. complete in all respect as directed by the Engineer-in-Charge. But excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or tor steel tying the grills and placing in proper position.

a) Footing

b) Column & Beams

c) Column & Beams (1st Floor)

d) Column & Beams (2nd Floor)

d) Plinth Beam

e) Lintel

f) Lintel (1st Floor)

g) Lintel (2nd Floor)

h) Chajja

i) Chajja(1st Floor)

j) Chajja(2nd Floor)

k) Slab

l) Slab (1st Floor)

m) Stair

n) Stair (1st Floor)

Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.

(1st Floor)

(2nd Floor)

Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

(1st Floor)

(2nd Floor)

Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

(1st Floor)

(2nd Floor)

Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.

(1st Floor)

Supplying, fitting and fixing of stainless steel of 304 grade in hand rail using 50mm dia of 2mm thick circular pipe with balustrade of size 32mm x 32mm x 2mm @ 0.90 mt c/c and stainless square pipe bacing of size 32mm x 32mm x 2mm in three rows in staircase as per approved design and specification, buffing, polishing etc with cost, conveyance of all materials, labour T&P etc. required for the complete in all respect as per the direction of Engineer -in- charge.

(1st Floor)

Supplying fitting, fixing M.S. angular frame of size 40x40x6mm for ceiling incluidng cutting welding, errecting, one coat priming, cost, conveyance of all materials, cost of all labour, T&P. required for the work etc. complete as directed by the Engineer-in-charge

(1st Floor)

(2nd Floor)

Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

(1st Floor)

Supplying, fitting & fixing in all floors of M.S. Panneled Door & Window Shutter including cost ,Conveyenance ,taxes etc. complete in all respect as per specification & direction of the Engineer-in-Charge.

(1st Floor)

(2nd Floor)

Providing factory made single leaf rigid FRP (alternately called GRP) sandwich composite door shutter of 32mm thick, laminated with two GRP skins with wood grain finish, fabricated using UV-stabilized Isopthalic Gelcoat and one layer of 450 gsm. E-glass Chopped Strand Mat (CSM) impregnated with crthopthalic, pclyester resin. The thickness of the skins shall not be less than 1.5mm, Expanded Polystyrene (EPS structural foam panel of 29mm thickness and a density of 20 kg /Cu. mtr. shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mm x 32mm and also necessary sal wood reinforcements for fixing the metal fittings such as tower bolts, aldrops, handles etc. shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The materials and process for manufacturing the door shutters shall confirm to RV-TIFAC composites Design Centre's shandards and specifications and the door shutters tested in confirmation to IS 4020-1998. The finish of door shutter will be plain colour white/ Ivory/Beige/ Light grey/ Mahogany/ Teak wood or any other colour using high quality pigments. Three heavy weight mild steel, but hinges type-I (ISI marked) size 100mm are to be fitted on one side of shutter

(1st Floor)

Providing factory made FRP (alternately called GRP) Door frame of size 75mm x 100mm, fabricated using E-Glass chopped strand Mat (CSM), U.V. stabolized Isopthalic Gelcoat and impregnated with Isophthalic resin The thickness of the GRP skin shall not be less than 2.0mm. The door frame consist of four segments, lwhich are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six location for high screw holding capacity for fixing metalic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement. Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S. flat hold fast shall be provided with the frame. The material and process for manufacturing the door frame shall confirm to RV-TIFAC composites Design Centre's shandards and specifications. The finish of door frame will be approved plain colour using high quality pigments

(1st Floor)

Supplying, fitting and fixing ceramic glazed tile in dado on 12mm thick bed of cement mortar (1:3) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including cost, conveyance, royalties of all materials and labour, T&P required for the work etc. complete as directed by the Engineer-in-charge

(1st Floor)

Supplying, fitting and fixing ceramic tile in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including cost, conveyance, royaltiesof all materials and labour, T&P required for the work etc. complete as directed by the Engineer-in-charge

(1st Floor)

Supplying, fitting and fixing industrial vitrified tile in floor treads or steps and landing on 25mm thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigments using white cement in grating to match the shade of the tile etc. including cost, conveyance, royaltiesof all materials and labour, T&P required for the work etc. complete as directed by the Engineer-in-charge

(1st Floor)

Supplying, fitting and fixing vitrified tile 60x60cm plain Ivory 8 to 10 mm thick in floors of approved make confirming to IS : 13755 with application of polymer modified cement based water resistant adhesive bed confirming to IS : 15477 of 3mm thick bed and filling joints with white cement of approved quality including cost of all materials, takes labour T&P etc required for the work

(1st Floor)

Supplying, fitting & fixing vetrified tile in dado skirting 12mm thick cement plaster (1:3:) jointed with neat cement slurry mixed with pigment using white cement in grating to match the shade of tiles including rubbing & polishing etc with cost, conveyance, royalities of all materials and cost of all labour, T&P required for the work etc. complete as directed by the Engineer-in-charge

(1st Floor)

Priming one coat with wall cement primer (water bound) to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess T&P etc. complete as per the direction of the Engineer-in-charge. (Make: Asian/ Berger/ Dulex/ ICI or equivalent make duly approved by Engineer-in-Charge)

(1st Floor)

(2nd Floor)

Wall painting two coats with Antifungal weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge. (Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-Charge)

(1st Floor)

(2nd Floor)

Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make (JK White/ Birla white or equivalent make duly approved by Engineer-in-Charge) and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge.

(1st Floor)

(2nd Floor)

Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge. Engineer-in-charge. (Make: Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge)

(1st Floor)

(2nd Floor)

Painting two coat with approved synthetic enamel paint to new iron work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge. (Make-Asian/ Berger/ Dulux/ ICI or equivalent make duly approved by Engineer-in-charge).

(1st Floor)

(2nd Floor)

Providing 2.5cm thick Grading Concrete over roof slab with cement concrete (1:2:2) using 6mm size black hard granite crusher broken chips and screened & washed sharp sand for mortar and finished smooth to the rough surface of slab inc

luding watering and curing with cost, conveyance, royalties of all materials with cost of all labour, labour cess and T&P required for the work etc. complete in all respect as directed by the Engineer in charge.(1st Floor)