Refurbishment upgradation replacement of old damaged parts and Supply Fabrication Erecting Testing and Commissioning and general overhauling of Fateh Kadal Gate for improving Inlet Outlet provisions for the conservation of Nigeen lake of JKLCMA

Dismantling of old damaged parts which includes lowering /raising mechanism of the gate by using tools and tackles & highly skilled labor

Supply & Installation of main gear 750mm (thickness 100mm) made on EN-24 main shaft 80mm dia 600 long with gunmetal bushes on two sides

Supply & Installation of second gear 600mm dia (thickness 75mm) made of EN-24 with gear shift 65mm thick (300mm long) with gun metal bushes on two sides and pinion gear 150mm dia, 125mm long Supply & Installation of Third gear 450mm dia, 125mmlong

Supply & Installation of third gear 450mm dia (thickness 60mm) made of EN-24 with gear shaft 65mm thick (300mm long) with gun metal bushes on two sides and pinion gear 150mm dia, 125mm long Supply & installation of Third gear 450mm dia, 125 mm long

Supply & Installation of driving gear 100mm dia and 150mm long with gun metal bushes on two sides and having a gear shaft 50mm dia, 800mm long Supply & installation of This driving gear works on two on two sides and it comes with a locking system

Gearing body plate 2 Nos. 12mm thick and has a width of 800mm and a height of 1400mm

M.S Bearing bracket with 150mm dia and 300 mm long with gun metal bushes100mm dia and 150mm long (M.S Bearing Bracket 4 Nos.)

Ms coupling 250 dia thick 35mm with 100mm colar 4 Nos. stud 25mm thick 100mm long 8 No.’s

Gate Enterance

A. Entrance 3.54m x 1.07m I. Chequered plate : II. Thickness 6mm i. No. of entrance = 2.. ii. Wt /mtr = 30.4 kg Total Weight (2x 3.54x 1.07 x47.1kg) =357Kg B. REINFORCEMENT: ISA 50x50x6 Qty =2no(3.54+ 3.54+1.07+1.07) Wt/m= 4.5kg Total Weight=41.49 kg C. Railing Pipes 50mm (NB) (4mx1.5m) Thickness 3.6mm Wt- 5.03 KG 2(4+4+4)+2(1.5 +1.5 +1.5)+8 x1.5= 45 Total=357+41.49+45=444

The job shall include Surface preparation shall include thorough cleaning and removal of all rust, scale, grease, and foreign material from the steel structure using manual or mechanical methods. • After surface preparation, Apply two (2) coats of approved iron oxide primer paint on all exposed steel surfaces and two coats of epoxy/ metal paint • Painting shall only commence after the in-charge Engineer approval of surface preparation. • All tools, scaffolding, safety gear, and equipment required for access and execution shall be arranged and included in the scope. Painting work shall be completed in all respects

Rubber Sealing:-Bottom Rubber Sealing 20mm thick 150 mm width Side seal L type with steel strips fixed with galvanized bolts